Ashknaz Oraee

University of Cambridge | Cam · Department of Engineering

Low-voltage ride-through (LVRT) is one of the most important criteria for integrating wind energy into the power grid. Based on grid connection codes, wind generators must remain connected during fault conditions. However, this requires a careful protection scheme design for addressing the successful ride through of the brushless doubly fed inducti...

Abstract A new fault diagnosis method for detecting the rotor eccentricity faults including static, dynamic and mixed eccentricity is proposed for brushless doubly‐fed induction machines (BDFIMs). BDFIMs are attractive alternatives for the conventional doubly‐fed induction generator (DFIG) for offshore wind power generation; therefore, paying atten...

The brushless doubly fed induction generator (BDFIG) is an alternative to the doubly fed induction generator (DFIG), widely used in wind turbines which avoids the need for brush gear and slip rings. The choice of pole numbers for the two stator windings present in the BDFIG sets the operating speed range but also affects the torque capability, magn...

To efficiently address the unbalanced grid voltage requirement in the converter controller of a doubly‐fed induction generator (DFIG), an additional function must be implemented in the control software. This function is added to the main control algorithm in order to reduce the side effects of negative sequence voltages that result in negative sequ...

This paper proposes effective approach for determining appropriate crowbar resistance value to be able to improve the brushless doubly fed induction generator ride through capability during any asymmetrical voltage dip scenarios. The brushless DFIG has great potential for wind power plants particularly in offshore applications where maintenance is...

The Brushless Doubly-fed Induction Generator (BDFIG) has high potential for wind energy systems, especially for offshore applications where minimum maintenance is vital. The machine low voltage ride through (LVRT) capability in the light of current grid code requirements was investigated using a precise dynamic model. This is particularly important...

In the presented paper, an analytical model is developed for calculation of the air gap magnetic flux density in the axial-flux surface-mounted PM machines. The slotting effect is taken into account in the air gap magnetic flux distribution, accurately. The main novelty of this study is replacing the stator teeth by some surface currents at the bor...

Doubly fed induction generators (DFIGs) are widely used in wind power systems; hence their reliability model is an important consideration for production assessment and economic analysis of wind energy conversion systems. However, to date mutual influences of reliability analysis, production estimations and economic assessments of wind farms have n...

This paper presents an optimized design method for the magnetic circuit of brushless doubly fed machines (BDFMs). The BDFM is an attractive electrical machine, particularly for wind power applications, as a replacement for doubly fed slip-ring generators. This study shows that the conventional design methods for the BDFM stator and rotor back iron...

Hybrid electric vehicles are becoming more popular due to environmental consciousness. Hybrid electric vehicles consist of a combustion and an electric motor. In practice, the effect of selecting appropriate electric motor is observable on all the main indices of vehicle performance such as maximum speed, gradeability, pollutant emission, fuel cons...

The brushless doubly fed machine (BDFM) is an alternative to the doubly fed induction generator, widely used in wind turbines without use of brush gear and slip ring. Rotor design is important for achieving an optimal multi-MW BDFM. To date, nested-loop rotors have been exclusively used in various BDFMs, although they may not be ideal for larger ma...

This article studies the converter rating requirement of a Brushless doubly-fed induction generator (DFIG) for wind turbine applications. Practical constraints such as the generator torque-speed requirement, reactive power management and grid low-voltage ride-through (LVRT) are considered. Experimental data have been used to obtain a realistic syst...

This paper presents analytical methods to calculate the equivalent circuit parameters for large-scale brushless doubly fed machines (BDFMs) with magnetic wedges utilized for closing stator open slots. The use of magnetic wedges reduces the magnetizing currents in the machine, reflected in the values of magnetizing inductances, but also increases le...

This paper presents an optimisation method for the converter rating for a Brushless Doubly-Fed Induction Generator (Brushless DFIG) wind turbine, considering grid's requirements on reactive power and low voltage ride-through (LVRT) compatibility. Steady-state and transient models of the machine have been utilised for the reactive power management a...

This study presents the performance analysis and testing of a 250 kW medium-speed brushless doubly-fed induction generator (DFIG), and its associated power electronics and control systems. The experimental tests confirm the design, and show the system's steady-state and dynamic performance and grid low-voltage ride-through capability. The medium-sp...

This paper studies the effects of magnetic wedges on the equivalent circuit parameters of the Brushless Doubly-Fed Machine (BDFM). Magnetic wedges are used in slot openings of large electrical machines to reduce magnetizing currents, but the study of their effects on the BDFM performance is not straightforward due to the complex magnetic fields in...

This paper studies the converter rating requirement of a Brushless Doubly-Fed Induction Generator for wind turbine applications by considering practical constraints such as generator torque-speed requirement, reactive power management and grid low-voltage ride-through (LVRT). Practical data have been used to obtain a realistic system model of a Bru...

Brushless Doubly Fed Induction Generator (BDFIG) has been recently proposed to be used in variable speed wind turbines. This paper intends to investigate the influence of certain model simplifications to obtain a reduced-order model of a wind turbine with BDFIG suitable for transient studies. To achieve this goal, small signal analysis is performed...

In this paper, a new structure for the rotor of the Brushless Doubly-Fed Machine (BDFM) is introduced to reduce the machine's torque ripple. The ripple has a considerable effect on the machine start up. At the first section of the paper, analytical expressions for the air gap permeance distribution, the air gap MMF distribution, cogging torque and...

The cause of about 10% of faults in induction machines is related to the rotor part. In this paper, an analytical method for general modeling of brushless doubly-fed machines (BDFMs) with broken rotor loops and end ring is presented. The approach is based on calculation of resistance and inductance matrices through the winding function of the machi...

The application of the brushless doubly-fed machine (BDFM) is in wind power generation in harsh conditions, where reliability is important. In this paper, eddy current losses in a BDFM in four categories: a) the rotor classic eddy current losses, b) stator classic eddy current losses, c) rotor excessive eddy current losses, and d) stator excessive...

In this paper, harmonic sources in a BDFM are studied, and a method for specifying rotor and stator space harmonic components is established. A criterion for evaluating different rotor designs is introduced, based on space harmonics. Then the equivalent space and time harmonic circuits are obtained, using basic equivalent circuit. Finally, the effe...