About
23
Publications
6,677
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
112
Citations
Additional affiliations
June 2007 - present
Education
June 2012 - October 2017
July 2004 - July 2006
Publications
Publications (23)
The Wear tests for Al-Zn alloys reinforced with TiO₂ and Si₃N₄ were conducted using the Pin-on-Disc method to estimate the wear rate under different load conditions, sliding distance, and reinforcement percentage. The time period for each test was kept constant at 10 minutes. The results presented that when the load of 30 N was applied with a slidi...
In this research work, the vacuum annealed stainless steel samples were subjected to a constant load. The wear behavior of AISI 431 sample were examined by using pin on disc wear tester. The vacuum annealing were used to preserve the stability between ductility and brittleness. The samples were created in cylindrical shape with a length of 40 mm an...
Natural fiber reinforced polymer composite is playing a vital role in advanced manufacturing process. The present investigation deals with ultrasonic drilling on the synthesized gelatin natural fiber composite. Lapox and screw pine fiber is considered as the reinforced matrix to the gelatin polymer. Hardness, tensile strength and impact strength is...
The involvement of computer-programmed autonomous mobile robots in real-time activities is emerging in the recent years. The actuation and interaction of the robots are controlled through optimized high-level programming to respond to environmental factors. Such robots require an optimized touring plan with a better response to understand the inher...
Microwave sintering process is the most economical and feasible technique to fabricate composite with superior quality of products. Nickel, aluminium and titanium alloy were reinforced with silicon carbide particles. The different microwave sintering constraints like sintering temperature, heating rate and hold time were considered to fabricate the...
The purpose of this research was to investigate the time-dependent behaviour of an epoxy composite prepared from silane-treated aramid fibre and waste latex rubber powder (LRP). To increase the adhesive behaviour of reinforcement with matrix, the aramid fibre and latex rubber powder were surface treated using amino silane. The composites were made...
The research work is related to nickel titanium composite that has been increased due its admirable substance properties. The present research concluded that the nickel and titanium is reinforced with boron carbide prepared by metallurgy method. The synthesized composite is processed under different testing for evaluation of substance properties. S...
This article has been withdrawn: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal).
This article has been withdrawn as part of the withdrawal of the Proceedings of the International Conference on Emerging Trends in Materials Science, Technology and Engineering (ICMSTE2K21). Su...
Particulate pollution has been increasing over the past few years. Industries have been trying to develop new methods and devices to remove particles from exhaust gas. Cyclone separator is a device with no moving parts is used to separate dust particles from exhaust gas. But, the main drawback is the increasing pressure drop. From the literature re...
In this energy hungry world, energy efficient methods to increase the extraction of work from various sources of renewable energy is always appreciated. One such commonly used source is wind energy. Wind turbines and their aerodynamics are always subjected to constant research for increasing their efficiency which convert the abundant wind energy i...
A research which was carried out to investigate the application of a technique called total quality function deployment (TQFD) in the case of overcoming low discharge problem in a type of pump known as shallow well jet pump has been reported in this paper. TQFD is incorporated with five matrices for translating customers’ vague languages into pract...
The production of biogas from the wastes is one of the proven and cost effective method to generate energy. There are various factors which affects the AD, which results in reduced biogas yield among that the low carbon nitrogen (C/N) ratio of poultry litter is a prime factor that affects the process adversely. In this research, the ammonia removal...
Sustainable manufacturing targets towards non-polluting means of manufacturing techniques and energy efficient method of manufacturing. In this work, sustainability in manufacturing is accomplished by introduction of a vortex tube. Vortex tube is a mechanical device that separates the hot compressed air and the cold air that flows through the tube...
This paper aimed at developing the response - dilution maps using response surface methodology. The proposed map is vital to achieve desired composition, properties and weld bead dimensions in stainless steel claddings. Controlled heat input and percentage dilution will enable the matching of surfaced layer properties with intended alloy. The flux...
The reduction of waste is essential in the present scenario and to survive in the competitive market, the appropriate concept has been taken as lean. A hybrid or synergistic approach will be appreciable for which TRIZ (theory to resolve inventive problems), a Russian concept, has been utilised for arrival at the solution to improve the productivity...
Lean manufacturing is presently an emerging philosophy for reducing the wastages and theory to resolve inventive problems (TRIZ) is an inventive problem solving tool in the times of economic recession. Individually, there have been a lot of papers discussing the implementation of the above concepts. But there has been no report of implementing Lean...
This paper presents an experimental study on the prediction of hardness of textile bottom rollers treated by laser beam. Using Nd-YAG laser hardening the bottom rollers are enhanced for their strength. The bottom rollers are one of the few important parts of textile machine giving quality yarns. The objective is to harden the complex shaped surface...