Arman Ehsani

Arman Ehsani
  • Doctor of Philosophy
  • Professor (Assistant) at Adana Alparslan Türkeş Science and Technology University

About

31
Publications
43,726
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
109
Citations
Current institution
Adana Alparslan Türkeş Science and Technology University
Current position
  • Professor (Assistant)
Additional affiliations
January 2013 - August 2019
Adana Science and Technology University
Position
  • Research Assistant
August 2011 - December 2013
Karadeniz Technical University
Position
  • Research Assistant

Publications

Publications (31)
Conference Paper
Full-text available
In this paper, the electrowinning of copper from a synthetic copper sulfate solution and the pregnant leach solution (PLS) derived from the leaching of e-waste was investigated. The effects of impurity ions (Co 2+ , Fe 3+ and Cl -) and additives (thiourea and gelatine) on the corrosion of lead anode, deposit quality and morphology were studied. The...
Conference Paper
Full-text available
The downstream treatment of chloride leach solutions of WPCB for recovery of base and precious metals by a combination of adsorption and precipitation processes were carried out. A synthetic leach solution (1 M HCl, 116.5 g/L Cl-, 30 g/L Cu2+, 2.5 g/L Fe3+, 5 mg/L Au3+, 10 mg/L Ag+ and 20 mg/L Pd2+), which was prepared based on the composition of t...
Article
Full-text available
In this paper, the electro-winning of copper from synthetic copper sulphate solutions and the pregnant leach solution (PLS) derived from the leaching of e-waste was investigated in an attempt to reduce energy consumption by using a polyoxometallate (POM), ammonium metatungstate hydrate (AMTH) as a novel additive. Effect of addition of AMTH on the c...
Article
Full-text available
In this study, firstly, the effects of ammonia concentration, leaching time and solid/liquid ratio on the leaching behaviour of zinc from a smithsonite (ZnCO3) ore sample in aqueous ammonia solutions were investigated at room temperature by chemical, X-ray diffraction (XRD) and Fourier-transform infrared (FT-IR) spectroscopy analyses. It was found...
Article
Full-text available
In this study, the direct conversion behaviors of different alkaline earth metal solids (the hydroxides and the sulfates of alkaline earth metals Ca, Sr, Ba and Mg) to their corresponding carbonates in dissolved carbonate-containing pregnant solutions obtained by direct leaching of a smithsonite (ZnCO3) ore sample in aqueous ammonia solutions havin...
Conference Paper
Full-text available
Besides sulfide ores, non-sulfide and mixed oxide-sulfide zinc have become important resources for zinc. Prior to processing these types of ores using non-conventional methods, chemical, and mineralogical characterization is required. In this study the chemical and mineralogical characteristics of domestic mixed zinc ore were studied using optical...
Article
Full-text available
In recent years, because of the decreasing liberation sizes of the minerals, processes such as grinding need to be evaluated in more detail. As is well known, size reduction processes are very important both in mineral processing and in many industrial applications. However, to increase the efficiency of the processes after size reduction, variatio...
Article
Full-text available
In this study, the interaction of barium (Ba(OH)2·8H2O and BaSO4) or magnesium (Mg(OH)2 and MgSO4·7H2O) containing solids with dissolved carbonate-loaded solutions formed after leaching of a local smithsonite (ZnCO3) ore sample in aqueous sodium hydroxide solutions was investigated using X-ray diffraction analyses for the removal of dissolved carbo...
Article
The impact of particle shape and surface properties has been mainly overlooked in the literature for different mineral systems. In this study, to investigate the effects of morphological variations, samples of clean coal particles (−0.212 + 0.075 mm) were used and the flotation experimental in a batch condition (2 L Denver cell) were conducted in t...
Article
Full-text available
Ülkemizin önemli sektörlerinden olan ve sanayi için hammadde sağlayan madencilik sektörü, doğası gereği içerdiği riskler nedeniyle bilgi, deneyim, uzmanlık ve sürekli denetim gerektiren sektörlerin başında gelmektedir. Madencilik sektöründe iş kazalarıyla ve meslek hastalıklarıyla diğer sektörlere nazaran daha çok karşılaşılmasının sebebi yoğun eme...
Article
Full-text available
X-Işını difraksiyonu yöntemi (XRD), daha çok mineral tipi tanımlaması (kalitatif analiz) için kullanılırken, minerallerin kantitatif kimyasal içerik analizi için titrasyon (yaş kimyasal analiz), X-Ray Fluressance (XRF), Atomik Absorbsiyon Spektrometresi (AAS), İndüktif Çiftlenmiş Plazma Kütle Spektrometresi (ICP-MS) gibi yöntemler kullanılmaktad...
Article
Full-text available
Vermiculite, a hydrated Mg/Al/Fe silicate mica-like clay mineral with a laminate structure. Vermiculite is a very versatile material. It has a remarkable ability to expand to many times its original volume (exfoliation) when heated (>300°C). The majority of applications call for vermiculite in its exfoliated form, and it has a wide range of appl...
Conference Paper
Full-text available
Marine surroundings (i.e., Seas and Oceans) constitute about 71% of the earth's surface. It consists of an enormous reservoir of numerous mineral deposits such as massive sulfides, manganese nodules and cobalt-rich ferromanganese crusts. These mineral deposits could be a possible choice to satisfy the rising demand for raw materials and ores in the...
Article
Full-text available
In this study, the historical development of the ocean and undersea mining has been discussed briefly. The oceans and seas cover about 71% of the earth surface area. The development of the deep-sea and ocean mining has passed through the sea and ocean science (oceanographic) studies. The first studies about sea and submarine carried out by the Cret...
Conference Paper
Full-text available
In this paper, a brief overview of the effect of temperature on the electrowinning of copper was provided. Furthermore experimental data for the influence of temperature on current efficiency, energy consumption, rate and morphology of Cu deposition in the electrowinning of copper from a synthetic copper sulfate solution were also presented. Temper...
Conference Paper
Full-text available
Seas and oceans constitute about 70% of the earth’s surface. They contain an enormous stock of various mineral resources such as sedimentary (marine placers), massive sulfide ore deposits, manganese nodules and cobalt-rich ferromanganese crusts. Sea and ocean floor ore deposits could well contribute to the meeting of ever-rising demand for raw mate...
Article
Full-text available
Copper, first metal discovered by mankind after gold, ensured the transition of human being from Stone Age to Bronze Age. Up to date, it is observed that copper is the world's most useful metal. Historic development of mankind is mainly affected by discovery and usage of metals and especially copper. Based on the initial findings of the various...
Article
Full-text available
Conference Paper
Full-text available
Seas and oceans constitute 72% of the earth surface area. The mineral deposits that occur on the sea and ocean floor perhaps is the only option that will be encountered to meet the needs of present and future raw materials. Due to this reason, we need to perform variety of scientific studies to provide the utmost benefit of seas and oceans' mineral...
Thesis
In this thesis, the recovery of copper by electro-winning (EW) and precipitation, from a synthetic and pregnant leach solution (SLS/PLS: 27-30 g/L Cu) derived from the leaching of e-waste was investigated. The effects of impurity ions (Co2+ , Fe 3+ and Cl - ), inorganic additives (thiourea, gelatine) and organic ammonium meta tungstate hydrate...
Conference Paper
In this study, recovery of copper by precipitation from copper-rich real/synthetic leach solutions derived from the acidic peroxide leaching of waste printed circuit boards (WPCBs) was investigated as an alternative to electro-winning. Copper was precipitated using ethanol as copper sulphate (CuSO4.5H2O) and using sodium sulphite (Na2SO3) as Chevre...
Conference Paper
Full-text available
Bu çalışmada, atık baskılı devre kartlarının (ABDK) asidik peroksit liçi sonucu elde edilen bakır içeriği yüksek (27-30 g/L Cu2+) gerçek/sentetik liç çözeltilerinden bakırın, elektro-kazanıma alternatif olarak, çöktürülerek kazanılması araştırılmıştır. Bakır, etanol ile bakır sülfat (CuSO4.5H2O) ve sodyum sülfit (Na2SO3) ile Chevreul tuzu (Cu2SO3.C...
Conference Paper
Full-text available
In this paper, the electrowinning of copper from a synthetic copper sulfate solution and the pregnant leach solution (PLS) derived from the leaching of e-waste was investigated. The effects of impurity ions (Co 2+ , Fe 3+ and Cl-) and additives (thiourea and gelatine) on the corrosion of lead anode, deposit quality and morphology were studied. The...

Questions

Questions (6)
Question
Best comprehensive books in history of metallurgical science and technology from beginning until now (including pre historic-historic and modern era)
Question
Electrolyte Solution with Low Zinc Concentration =2-10 g/L Zn
How can I perform Electrowinning Process to obtain Zn.
Question
I want to study in depth of size reduction-sorting-classification-benefication-purification and extraction processes of metalic and industrial raw materials in a flow-sheet format.
Question
Hydometallurgical methods includes roasting, leaching and electrowinning and maybe after electrowinning it needs another pyrometallurgical process (casting) to produce zinc ingots. So directly using pyro methods like ISP (Imperial Smelting Process) seems to be more suitable for producing Zinc from oxide and sulfide ores.
Question
Zinc Production from Oxide- Carbonate ores. (esp. Smitsonite)

Network

Cited By