Aris Zainul Muttaqin

Universitas Jember · Department of Mechanical Engineering

A classification scheme for myoelectric control systems (MCS) cannot mimic complex hand movements. This paper presents simultaneous and proportional MCS by estimating the angles of fourteen finger joints using time-domain feature extraction and random forest. The experimental results show that the best feature was the root mean square (RMS). Furthe...

3D printing is a process of making three-dimensional solid objects from a digital file process created by laying down successive layers of material until the object is created. Many filaments can be used in 3D printing, one of which is PETG (PolyEthylene Terephthalate Glycol). PETG is a modification of PET (PolyEthylene Terephthalate) with added gl...

It is normal to apply cutting fluid to machining, but using it excessively will harm the environment. One of the efforts to reduce it is to apply minimum quantity lubrication (MQL). This study aims to minimize the use of cutting fluid by designing a cutting fluid delivery system with Arduino Uno control. The developed MQL system can be controlled b...

Fish Car Unej (FCU) Mudskip is a car designed with a rural terrain system, especially for fishing transportation. FCU Mudskip uses leaf spring suspension at the rear to support the weight of the vehicle, that is leaning towards the rear. The load of the vehicle is inclined to the rear due to the car carrying system in the form of fish and water. Th...

There are several ways to assess machinability, viz. forces that are working during machining, the surface roughness of machined part, chip formation, and tool performance. This article aims to observe the machinability from the tool performance perspective when machining with minimum quantity lubrication (MQL). The MQL device can either be time-c...

Kebutuhan energi semakin meningkat dengan adanya kemajuan teknologi, sehingga manusia berusaha untuk mengeksploitasi sumber energi secara maksimal. Oleh karena itu perlu inovasi baru untuk menggantikan sumber energi tersebut, salah satunya adalah penggunaan Phase Change Material (PCM) pada kolektor pemanas air. Pada penelitian ini PCM yang diguakan...

In machining excessive use of cutting fluid can have a negative impact on the environment. An alternative to overcome this problem is by using the minimum quantity lubrication method (MQL). In MQL method the cutting fluid is flowed by compressed air. This research aims to design and implement an Arduino-based controller for further minimize the use...

The synthesis of nanoparticles using thermal DC plasma method is a simple method for ease of installation and high efficiency is due to the rate of precursor that can be controlled. Micro-sized aluminum powder is synthesized using thermal DC plasma undergoing a process of evaporation as it passes through high temperature plasma flame, where kemuadi...