Andrey Krayev

• Researcher at AIST-NT Inc

Two-dimensional (2D) Janus transition metal dichalcogenides (TMDs) are promising candidates for various applications in non-linear optics, energy harvesting, and catalysis. These materials are usually synthesized via chemical conversion of pristine TMDs. Nanometer-scale characterization of the obtained Janus materials' morphology and local composit...

We present a systematic study of the dependence of gap mode tip-enhanced Raman scattering (TERS) of mono- and bi-layer WS$_2$ and MoS$_2$ as a function of excitation laser energy. We collected consecutive TERS maps of mono-and bi-layer regions with 6 different excitation lasers. To decrease the acquisition time, we used for the first time concurren...

Chemical transformations near plasmonic metals have attracted increasing attention in the past few years. Specifically, reactions occurring within plasmonic nanojunctions that can be detected via surface and tip-enhanced Raman (SER and TER) scattering were the focus of numerous reports. In this context, even though the transition between localized...

The advancement of quantum photonic technologies relies on the ability to precisely control the degrees of freedom of optically active states. Here, we realize real-time, room-temperature tunable strong plasmon-exciton coupling in 2D semiconductor monolayers enabled by a general approach that combines strain engineering plus force-and voltage-adjus...

The Effect of Edge Termination In article number 2205800, Humberto Terrones, Ana Laura Elías, Mauricio Terrones, and co‐workers demonstrate the importance of atomic edge termination in determining the spatial distribution of substitutional dopants in 2D transition metal dichalcogenide (TMD) hexagonal monolayers. Preferential iron and vanadium dopin...

This chapter covers state-of-the-art development and results in tip-enhanced Raman spectroscopy (TERS) as a significant configuration of near-field nanospectroscopy. The chapter develops by drawing attention to the importance of TERS with a background motivation of the specific research area. Subsequently, the development of TERS instrumentation is...

The ability to control the density and spatial distribution of substitutional dopants in semiconductors is crucial for achieving desired physicochemical properties. Substitutional doping with adjustable doping levels has been previously demonstrated in 2D transition metal dichalcogenides (TMDs); however, the spatial control of dopant distribution r...

The interplay between excitons and phonons governs the optical and electronic properties of transition metal dichalcogenides (TMDs). Even though a number of linear and nonlinear optical-, electron-, and photoelectron-based approaches have been developed and/or adopted to characterize excitons and phonons in single/few-layer TMDs and their heterostr...

Second harmonic generation (SHG) is a nonlinear optical response arising exclusively from broken inversion symmetry in the electric‐dipole limit. Recently, SHG has attracted widespread interest as a versatile and noninvasive tool for characterization of crystal symmetry and emerging ferroic or topological orders in quantum materials. However, conve...

We conducted a tip-enhanced Raman scattering spectroscopy (TERS) and photoluminescence (PL) study of quasi-1D TaSe3-δ nanoribbons exfoliated onto gold substrates. At a selenium deficiency of δ ∼ 0.25 (Se/Ta = 2.75), the nanoribbons exhibit a strong, broad PL peak centered around ∼920 nm (1.35 eV), suggesting their semiconducting behavior. Such nano...

Reliable transfer processes that enable manipulation of two-dimensional (2D) materials, e.g., transition metal dichalcogenides (TMDCs) and MXenes, from one substrate to another has been a necessity for successful device fabrication. With both mechanical exfoliation and chemical vapor deposition (CVD) widely used, a versatile, clean, deterministic,...

We conducted a tip-enhanced Raman scattering spectroscopy (TERS) and photoluminescence (PL) study of quasi-1D TaSe3 nanoribbons exfoliated onto gold substrates. At a selenium deficiency of ~0.25 (Se/Ta=2.75,), the nanoribbons exhibit a strong, broad PL peak centered around ~920 nm (1.35 eV), suggesting their semiconducting behavior. Such nanoribbon...

Second harmonic generation (SHG) is a nonlinear optical response arising exclusively from broken inversion symmetry in the electric-dipole limit. Recently, SHG has attracted widespread interest as a versatile and noninvasive tool for characterization of crystal symmetry and emerging ferroic or topological orders in quantum materials. However, conve...

We combine nanoindentation, herein achieved using atomic force microscopy-based pulsed-force lithography, with tip-enhanced Raman spectroscopy (TERS) and imaging. Our approach entails indentation and multimodal characterization of otherwise flat Au substrates, followed by chemical functionalization and TERS spectral imaging of the indented nanostru...

Van der Waals materials exhibit naturally passivated surfaces and can form versatile heterostructures, enabling observation of carrier transport mechanisms not seen in three-dimensional materials. Here we report observation of a "band bending junction", a new type of semiconductor homojunction whose surface potential landscape depends solely on a d...

Van der Waals materials exhibit naturally passivated surfaces and can form versatile heterostructures, enabling observation of carrier transport mechanisms not seen in three-dimensional materials. Here we report observation of a "band bending junction", a new type of semiconductor homojunction whose surface potential landscape depends solely on a d...

In monolayer transition-metal dichalcogenides, localized strain can be used to design nanoarrays of single photon sources. Despite strong empirical correlation, the nanoscale interplay between excitons and local crystalline structure that gives rise to these quantum emitters is poorly understood. Here, we combine room-temperature nano-optical imagi...

When layers of van der Waals materials are deposited via exfoliation or viscoelastic stamping, nanobubbles are sometimes created from aggregated trapped fluids. Though they can be considered a nuisance, nanobubbles have attracted scientific interest in their own right owing to their ability to generate large in-plane strain gradients that lead to r...

We revisit the reductive coupling of p-nitrothiophenol (NTP) to form dimercaptoazobenzene (DMAB), herein monitored through gap-mode tip-enhanced Raman spectroscopy (TERS) and nano-imaging. We employ a plasmonic Au probe (100 nm diameter at its apex) illuminated with a 633 nm laser source (50 W/m2 at the sample position) to image a NTP-coated face...

Plasmonic tip-sample junctions, at which the incident and scattered optical fields are localized and optimally enhanced, are often exploited to achieve ultrasensitive and highly spatially localized tip-enhanced Raman scattering (TERS). Recent work has demonstrated that the sensitivity and spatial resolution that are required to probe single molecul...

In monolayer transition metal dichalcogenides, quantum emitters are associated with localized strain that can be deterministically applied to create designer nano-arrays of single photon sources. Despite an overwhelming empirical correlation with local strain, the nanoscale interplay between strain, excitons, defects and local crystalline structure...

We demonstrate fast (0.25 s/pixel) nanoscale chemical imaging in aqueous solution via tip-enhanced Raman scattering (TERS), with sub-15 nm spatial resolution. The substrate consists of 4-mercaptobenzonitrile-functionalized monocrystalline gold triangular platelets immersed in H2O, which we map using a gold-coated AFM probe illuminated using a 633 n...

We demonstrate fast (0.25 s/pixel) nanoscale chemical imaging in aqueous solution via tip-enhanced Raman scattering (TERS), with sub-15 nm spatial resolution. The substrate consists of 4-mercaptobenzonitrile-functionalized monocrystalline gold triangular platelets immersed in H2O, which we map using a gold-coated AFM probe illuminated using a 633 n...

Visualising the distribution of structural defects and functional groups present on the surface of two-dimensional (2D) materials such as graphene oxide challenges the sensitivity and spatial resolution of the most advanced analytical techniques. Here we demonstrate mapping of functional groups on a carboxyl-modified graphene oxide (GO-COOH) surfac...

Tip-enhanced Raman spectroscopy (TERS) is particularly sensitive to analytes residing at plasmonic tip-sample nanojunctions, where the incident and scattered optical fields may be localized and optimally enhanced. However, the enhanced local electric fields in this so-called gap-mode TERS configuration are nominally orthogonal to the sample plane....

While extensive research effort has been devoted to the study of the 2D semiconductor–insulator interfaces in transition metal dichalcogenides (TMDCs), there is little knowledge about the electronic quality of the semiconductor–metal interface in the atomically thin limit. Here, we present the first correlated nanoscale mapping of the interface of...

Understanding growth, grain boundaries (GBs), and defects of emerging two-dimensional (2D) materials is key to enabling their future applications. For quick, non-destructive metrology, many studies rely on confocal Raman spectroscopy, the spatial resolution of which is constrained by the diffraction limit. Here we use tip-enhanced Raman spectroscop...

Transition metal dichalcogenides (TMDCs) of molybdenum and tungsten have recently attracted significant attention due to their band gaps in visible part of the spectrum for optoelectronic device applications. The ability to isolate these materials down to a monolayer with direct band-gap make TMDCs very attractive alternatives to graphene. While a...

Localized surface plasmons resonances are the dominating contribution to the optical enhancement and the lateral resolution in tip-enhanced Raman spectroscopy. This well studied phenomenon may give access to more information about the sample than the enhanced Raman spectra alone due to its sensitivity to the permittivity of the tip environment. In...

2D transition metal dichalcogenides (TMDs) are commonly grown by chemical vapor deposition using transition metal oxides as solid precursors. Despite the widespread use of this technique, challenges in reproducibility, coverage, and material quality are pervasive, suggestive of unknown and uncontrolled process parameters. In this communication, we...

We report results of TERS characterization of graphene oxide and the 2D semiconductors, MoS2 and WS2. The gap mode TERS signal of these 2D materials becomes dramatically enhanced over wrinkles and creases, as well as over nanopatterns imprinted into flakes using a sharp diamond probe. The resonant Raman signal of MoS2 contains additional peaks norm...

Supramolecular ordering of organic semiconductors is the key factor defining their electrical characteristics. Yet, it is extremely difficult to control, particularly at the interface with metal and dielectric surfaces in semiconducting devices. We have explored the growth of n-type semiconducting films based on hydrogen–bonded monoalkylnaphthalene...

Detailed structural characterization of novel two-dimensional materials plays a key role in understanding their properties and designing optoelectronic devices. High resolution spatial imaging is important for characterizing defects, edges, and grain boundaries. We use tip-enhanced Raman scattering (TERS) to obtain nanoscale vibrational images of m...

We report successful chemically specific high pixel density, high speed (less than 10 minutes per map) TERS imaging of graphene oxide, carbon nanotubes of different chirality, fullerenes and self-assembled layers of organic molecules in both the single-component and complex samples. The spatial resolution routinely obtained in such chemically speci...

We report on 14 nm lateral resolution in tip-enhanced Raman spectroscopy mapping of carbon nanotubes with an experimental setup that has been designed for the analysis of opaque samples in confocal side-access through a novel piezo-driven objective scanner. The objective scanner allows for fast and stable laser-to-tip alignment and for the adjustme...

A simple quantitative model for the analysis of EFM images of three- or more-component polymer blends is applied to determine the dielectric constants of the blend constituents. The value of the dielectric constant of PIPA calculated from the EFM images of POMA-PIPA-APP blend is determined in good agreement with the literature value.

We report the applicability of Electric Force Microscopy (EFM) for the analysis of thin films of dielectric heterogeneous polymer blends constituted of polymers with both close and significantly different dielectric constants and offer a simple model that enables quantitative analysis of EFM images of such blends.