Anandha Moorthy

Bannari Amman Institute of Technology | BIT · Department of Mechanical Engineering

The HDPE/HA/zeolite (65/30/5) composite was obtained by injection molding. Hydroxyapatite (HA) was synthetized using microwave technique. FT-IR showed the presence of hydroxyl and phosphate functional groups. The structure was studied using X-ray diffraction (XRD), and field emission scanning electron microscope (FESEM). The energy dispersive X-ray...

The practical application of Additive Manufacturing (AM) technology expands constantly in the automotive, aerospace, and biomedical sectors, among others. Additive manufacturing technology has been categorized by ASTM into seven groups according to the type of material and process used to fabricate the parts. Intellectual property rights of manufac...

The tensile strength of samples made by FDM technology from PLA and PLA with different fillers (aluminum oxide, copper, carbon fiber) was investigated. FDM process parameters (raster angle, layer thickness and number of shells) were optimized using ANOVA test. It was found that the raster angle is the most influential parameter. Tensile strength in...

The influence of the natural Gongura roselle fiber on the tensile and flexural properties as well as on Shore D hardness of acrylonitrile-butadiene-styrene (ABS) and poly (lactic acid) (PLA) was investigated. The composites were printed in fused deposition modeling (FDM) 3D technique. The addition of natural fiber improved the mechanical properties...

Additive manufacturing (AM) is the best technology in manufacturing the components without complexity. This technology is classified as seven categories by ASTM standards. Based on types of materials, it is classified into two. Materials and types of technology define the property of fabricated parts. Single material printed parts give less materia...

The recent dynamical world cannot imagine the growth without fetching any thought of upgrading in material composite. Numerous studies are taking place in these biodegradable polymer composite materials to attain the required standards. Biodegradable fiber embedded polymer composites have a strong correspondence to change the composite fabricated o...

The recent developing world can’t be imagining the future growth without any new addition of materials with enhanced properties. Extensive number of researches is going on to develop high strength to low weight bio polymer composite materials to achieve the environmental and industry standards. Biodegradable polymer composite materials embedded wit...

An attempt has been performed to observe the influence of heat treatment on composite specimen by dry sliding wear and hardness testing. The particulate reinforcements embedded with AA2218 Aluminium metallic element alloy with 4% constant weight proportion of Graphite, MoS 2 , with a variable amount of hard reinforcement particulates. Availability...

Aluminium matrix composites (AMC) strengthened with hard particles has given rise to a potential material particularly for wear resistant and weight basic applications. The effect of heat treatment of aluminium alloys sliding wear nature are observed under varying load and speed. Irrespective of materials heat treatment improves hardness of the mat...

The present research work deals with an effective solution to dump and dispose the menstrual waste with the help of an incinerator. The system involves an incinerator which uses electricity to heat the heating coil which in turn will lit up the sanitary napkins when dumped into the incinerator. The principle of heat being generated when current is...

The modern world can't be possible without any kind of improvement in the development of tailor made materials. Numerous researches are carried especially on synthesize of polymer based composite materials to attain the superior mechanical properties. Fibre Reinforced Plastics, Thermo & Thermoset Plastics are replaced with natural fibre reinforced...

2. M.Manojkumar, R.Sivakumar, A.Anandha Moorthy, “OPTIMIZATION TECHNIQUE TO STUDY DRY SLIDING WEAR BEHAVIOR OF ALUMINIUM ALLOY 2218 BASED SELF LUBRICATING COMPOSITE MATERIALS” International Journal of Advance Research and Innovative Ideas in Education (IJARIIE) - ISSN(O) - 2395-4396, Vol-1, pp 953-965, Issue-5, 2015.

Synthesizing of Metal Matrix Composite (MMC) with 5, 10, 15 weight percentage of fly ash and 4 weight percentage of talc by stir casting route. Self lubricating metal matrix composite material has the advantage of producing a lubrication effect at the high temperature area and where, it is difficult to maintain the lubricity. The applications of se...

The purpose of this paper to evaluate the performance of self-lubricating composite material based plain bearing by experimentation. Self-Lubricating Composite material based plain bearings are prepared by stir casting method, with a combination of AA 2218 Al alloy + 15 % of fly ash + 4 % of MoS2. The perception of experimental setup was referred f...

AA2218 alloy reinforced with 5, 10, 15 wt. % of fly ash and 5 wt. % of graphite was prepared by metal stir casting route. The effect of applied load, sliding speed and time on wear rate of the hybrid metal matrix composite materials was studied by performing dry sliding wear test using a pin on disc apparatus. As per ASTM standard, the density and...

Abstract The present work concentrates on the influence of addition of fly ash particulates as reinforcement on the tribological behaviour of aluminium matrix composites reinforced with Graphite (Gr) particulates. Use of graphite (Gr) reinforcement in aluminium matrix composites has been accounted to be good in reducing wear due to its solid lubri...

The experimental investigation of hybrid metal matrix composites of fly ash and graphite reinforced with aluminium alloy (Al6061). Composites samples are processed by stir casting route. Al6061 matrix alloy was reinforced with 3, 6 and 9 wt. % fly ash as first phase, 3 wt. % of graphite as second phase reinforcement. Hardness of the hybrid composit...

In the present scenario composite materials are extensively used for structural applications in automobile and aerospace industries. Composite material exhibits a high strength to weight ratio, improved hardness, reduced weight and low coefficient of friction. Because of their enhanced tribological properties helps to achieve low manufacturing cost...

The purpose of this paper is to evaluate the performance of self-lubricating composite materials with vibration suppression. Composite materials are prepared by using stir casting method with the combination of Aluminium alloy + 15 weight percentage of fly ash + 4 weight percentage of Graphite and Boron Nitride. Two specimens have to be prepared fo...

Tribological behaviors of aluminium alloy AA2218 reinforced with Fly ash (15wt. %) + boron nitride (4wt. %) of the self-lubricating composites were fabricated by stir casting route. The wear and frictional properties of the self-lubricating hybrid metal matrix composites were achieved by performing dry sliding wear test using a pin-on-disc apparatu...

Tribological behaviors of aluminium alloy AA2218 reinforced with Fly ash (15wt. %) + boron nitride (4wt. %) of the self-lubricating composites were fabricated by stir casting route. The wear and frictional properties of the selflubricating hybrid metal matrix composites were achieved by performing dry sliding wear test using a pin-on-disc apparatus...

AA2218 based self-lubricating metal matrix composite was prepared with 5, 10 & 15 weight percent of fly ash and 4 weight percentage of MoS 2. Dry sliding wear behavior of self lubricating composite was tested at room temperature by pin on disc wear testing apparatus. Wear rate, Coefficient of friction and volume loss of self lubricating composite h...

The experimental investigation of hybrid metal matrix composites with fly ash and graphite reinforced aluminium alloy (Al 6061) composites samples, processed by stir casting route are reported. The aluminium alloy was reinforced with 3 wt.%, 6 wt.%, 9 wt.% fly ash and fixed 3 wt.% of graphite to mixture the hybrid composite. Hardness of the hybrid...