Amit Chakrabortty

• Bachelor of Engineering
• Ahsanullah University of Science and Technology

A carding machine's performance has an impact on the quality of the carded sliver, which in turn affects the quality of the carded yarn produced. Several factors can influence a machine's efficiency, resulting in fluctu ations in the slivers generated over time. To achieve consistent and reproducible quality levels, slivers from all carding machi...

The ribbon retting method has been developed as a remedy for the issues associated with the conventional water retting method. But this method has not yet gained popularity among jute growers due to the unavailability of catalyst, inadequate training and lack of interest of farmers. The study deals with the improvement of the existing ribbon rettin...

In textile industries, spinning sector plays a vital role because this sector produces the main raw material for the textile industries which is known as yarn. So for getting good qualities garments, it is needed to ensure the good qualities yarn. There are many things which are responsible for producing good qualities yarn. Among these spindle spe...

It is intended to establish a C programming for the purpose of removal of trash in an automatic way in carding machine. For selection of degree of cleaning, it has to be considered other process factors like fiber loss, fiber rupturing, neps generation etc. Higher degree of cleaning causes higher degree of fiber loss. Fiber loss causes great loss o...

The qualities of rotor spun yarn greatly depend on the fibre properties as well as processing parameters especially when the yarn is manufactured from 100% waste cotton. The purpose of this work was to observe the effect of the main vacuum pressure of the transfer channel and the additional suction pressure for the trash removal on the quality of r...

The purpose of the study is to produce herbal medical bandages which have antimicrobial properties as well as which will heal the wound place without applying any dressing materials. In this purpose, extracts of two eco-friendly herbs Bikash leaf (Mikania micrantha) and Durba grass (Cynodon dactylon) were used. After the sample preparation, odor te...

Nowadays Sustainability is one of the major concerning issues in the Garments Industry of Bangladesh. As the garment industry of Bangladesh is rising, both buyers and manufacturers are now more aware than ever before of the welfare and worker-friendly environment in the garments. The purpose of the study is to find out the significance level along...

Compact spinning is the modification of existing ring spinning technology. The structure and quality of yarn are improved by using this spinning technique. This experimental work explores the effect of air suction pressure on the quality of compact yarn. Due to this reason, five samples of 52 Ne yarn were produced using different negative suction p...

The existence of intermolecular attractive forces of polarity and hydrogen bond is imperative in providing strength, heat resistance and dry-cleaning resistance to cotton fabric. However, these forces enhance easy wetting of fiber by water offering little resistance to snow and rain for outerwear garments. This problem could be overcome by adding w...