Ali Ihsan Kömür

Akdeniz University · Department of Chemistry

In the present study, the electrosynthesis and the electrochemical characterization of azo dyes doped poly(3,4-ethylenedioxythiophene (PEDOT) were described. PEDOT film was electrochemically deposited onto indium doped tin oxide (ITO) coated/glass electrode, following azo dyes adsorption. The electropolymerized-PEDOT films on ITO glass were doped w...

The electrochemical behavior of (2E,5E)-2,5-dibenzylidenecyclopentanone (P1) and (2E,5E)-2,5-bis(4-nitrobenzyli-dene)cyclopentanone (P2) known as bis-chalcone derivatives was studied by cyclic voltammetry (CV) using an indium tin oxide (ITO) as the working electrode. Repeated cyclic voltammograms measurements exhibited excellent long-term redox sta...

This study focuses on the electrochromic device (ECD) applications of poly(3,4-ethylenedioxythiophene)/tungsten oxide (PEDOT/WO3) hybrid nanofibers prepared via electrospinning method. Nanoporous WO3 films were initially electrosynthesized on Pt sheet. The PEDOT layer was electropolymerized onto the entire surface of the WO3 nanoporous host framewo...

The tungsten oxide (WO3) nanofibers were grown directly onto an ITO-coated glass via an electrospinning method for electrochromic applications. The electrochromic properties of WO3 nanofibers were investigated in the presence of different electrolytes including a series of ionic liquids and classic LiClO4-PC system. A significant optical modulation...

We report the first successful applications of tungsten oxide/conducting polymer hybrid nanofiber assemblies in electrochromic devices. Poly(3,4-ethylenedioxythiophene)/tungsten oxide (PEDOT/WO3) and polypyrrole/tungsten oxide (PPy/WO3) composites were prepared by an in situ chemical oxidative polymerization of monomers in different ionic liquids;...

Purpose The purpose of this paper was to investigate the effects of hydrochloric acid (HCl), hydrazine, methyl methacrylate, styrene and hexamethyldisiloxane by radio-frequency (rf) plasma graftings on surface properties of wool and denim fabrics. Design/methodology/approach During plasma treatments, processing time was varied under optimized plas...

This study focuses on the electrochromic device (ECD) applications of poly(3,4-ethylenedioxythiophene)/tungsten oxide (PEDOT/WO3) hybrid nanofibers prepared via electrospinning method. Nanoporous WO3 films were initially electrosynthesized on Pt sheet. The PEDOT layer was electropolymerized onto the entire surface of the WO3 nanoporous host framewo...

Poly(3,4-ethylenedioxythiophene)/tungsten (PEDOT/W) composites were prepared by an in situ chemical oxidative polymerization of 3,4-ethylenedioxythiophene in different ionic liquids; 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4), 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6), 1-butyl- 3-methylimidazolium bis(trifluoromethylsul...

Polyaniline-wool (PAN-WF), poly(3,4-ethylenedioxythiophene)-wool (PEDOT-WF), polypyrrole-wool (PPy-WF) fabrics were successfully prepared via atmospheric pressure plasma process. Scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), Fourier Transform Infrared Spectroscopy (FTIR) and four-probe resistance measurements were use...

Many great investigations and new techniques focused on the study of textile to improve textile surface properties such as wetting, antistatic, electrical conduction, penetration, and so on 1,2 . The static charge is a critical factor and an important limitation for many applications such as garments in direct contact with human skin 3,4 . Both low...

Cleaning process applied to microorganisms on any substance is called as sterilization. This process can be applied with different methods such as chemical (EtO), filtration (gases, liquids), temperature sterilizations etc. However, these methods have some drawbacks. Plasma sterilization is one of the rapidly developing technique in the study of di...