Ali Belhocine

University Mustapha Stambouli of Mascara

The present study concerns, from the angle of numerical simulation, a laminar flow in a plane duct with simultaneously developing velocity and temperature profiles. It is assumed that the fluid is Newtonian, viscous, and incompressible, with uniform and constant physical properties. The problem of laminar flow heat transfer is analyzed for both con...

The present study concerns, from the angle of numerical simulation, the case of a laminar flow in a plane duct with simultaneously developing velocity and temperature profiles. We considered that the fluid is Newtonian, viscous, and incompressible with uniform and constant physical properties. We analyzed the problem of laminar flow heat transfer f...

Brakes are one of the basic safety systems on a vehicle. During the operation of the vehicle, the brakes allow the vehicle to slow down, i.e., to adapt to traffic conditions or to stop, if necessary. However, in all conditions mentioned, emissions of brake wear products occur, which are very harmful to the environment because they can contain heavy...

Dear Dr. Ali: Thank you for your review of "Effects of lacunocanalicular morphology and network architecture on fluid dynamic environments of osteocytes and bone mechanoresponses," by Ruisen Fu and Haisheng Yang. We are very grateful for the thought and effort you have put into your comments. If you keyed your report into the online review form,...

Manuscript Number: HMT-D-24-05193 Thermal Contact Analysis of Cracked Through-Silicon Via Structures in Integrated Circuits Tao Wu; Tao Xue; Xiaobing Zhang Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decision, but also en...

Ref.: Ms. No. RINENG-D-24-05996 Crack propagation in an energy storage flywheel rotor using finite element method Results in Engineering Dear Dr Belhocine, Thank You for your review of this manuscript. You may access your review comments and the decision letter (when available) by logging on to the Editorial Manager site at https://www.editoria...

Ms. Ref. No.: MEAS-D-24-09279 Title: A Novel Health Index Clustering Method for Online Detection of Brake Disc Dynamic Balancing Measurement Dear Dr. belhocine ali, Thank you for your review of this manuscript. You may access your review comments and the decision letter (when available) by logging onto the Editorial Manager at https://www.editor...

Dear Dr Belhocine, Thank you very much for your review of manuscript NASA-D-24-00021R1, "Entropy generation analysis on MHD of hybrid nanofluid flow influenced by a Wedge and Plate with different methods: Solar thermal application.". We greatly appreciate your assistance. With kind regards, Springer Journals Editorial Office

Manuscript Number: JMRT-D-24-07069 Predict Mechanical Properties of Low-Alloy Steels Using the Features Extracted from EBSD Characterization Yu Li; Jingxiao Zhao; Xiucheng Li; Zhao Xing; Qiqiang Duan; Xiaojun Liang; Xuemin Wang Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution a...

Dear Dr. Ali Belhocine, Thank you for submitting the review form for the UiTM International Conference on Mathematical Sciences 2024 (UICMS2024). We greatly appreciate the time and effort you dedicated to reviewing the manuscript. We hope to continue benefiting from your expertise in the future. Attached herewith is the appreciation letter for you...

Ref.: Ms. No. JTAC-D-24-01324 The influence of the braking disc construction on the heating of friction pair (disc - pads) Journal of Thermal Analysis and Calorimetry Dear Dr Belhocine, Thank You for your review of this manuscript. Kind regards, Dr. Imre Miklós Szilágyi Editor-in-Chief Journal of Thermal Analysis and Calorimetry

Ref.: Ms. No. ICHMT-D-24-03236 CALCULATION OF THE TEMPERATURE FIELD IN THE THERMAL SENSITIVE DISC-PAD COUPLE DURING MULTIPLE BRAKING International Communications in Heat and Mass Transfer Dear Dr Belhocine, I would like to gratefully acknowledge the receipt of your valuable review comments for the above submission to the International Communicati...

Ref.: Ms. No. RINENG-D-24-02718 Investigating Ternary Biogas-Hydrogen-Diethyl Ether Blends for Emission Reduction and Performance Enhancement in CI Engines: A Taguchi Approach Results in Engineering Dear Dr Belhocine, Thank You for your review of this manuscript. You may access your review comments and the decision letter (when available) by log...

Manuscript number: ATE-D-24-05254 Experimental investigation and heat transfer enhancement topology optimization design of brake disc ribs for high-speed train Yili Zhou; Shuguang Yao; Ping Xu; Jie Xing; Chengxing Yang Dear Dr ali, Thank you for reviewing the above referenced manuscript. We greatly appreciate your contribution and time, which not...

Ms. Ref. No.: ASEJ-D-24-01819 Title: An Explainable AI-Driven Fall System for Sensor Data Analysis Enhanced by Butterworth Filtering Ain Shams Engineering Journal Dear Dr Ali Belhocine, Thank you for taking the time to review the above-referenced manuscript. You can access your comments and the decision letter when it becomes available. To acces...

The brake discs are subjected to thermal load due to sliding by the brake pad and fluctuating loads because of the braking load. This combined loading problem requires simulation using coupled thermo-mechanical analysis for design evaluation. This work presents a combined thermal and mechanical finite element analysis (FEA) and evolutionary optimiz...

In this paper, the implicit assumptions in Levesque's approximation are reexamined , and the dimensionless temperature distribution and the thermal boundary layer thickness were illustrated using the developed solution. By defining a similarity variable, the governing equations and boundary conditions are reduced to a typical dimensionless form in...

Journal: WSEAS Transactions on Mathematics Ref manuscript ID: 5106-1973 Manuscript title“Nonexistence of Global Solutions for Elliptic Equations With Fractional Laplacian and Variable Exponents Nonlinearities” The Editor-in-Chief of the journal would like to thank you also for your many thoughtful comments, important remarks, hints, questions, and...

Ref.: Ms. No. ICHMT-D-24-01780 Influence of thermal expansion and wear on the temperatures and stresses International Communications in Heat and Mass Transfer Dear Dr Belhocine, I would like to gratefully acknowledge the receipt of your valuable review comments for the above submission to the International Communications in Heat and Mass Transfer...

The brake discs are subjected to thermal load due to sliding by the brake pad and fluctuating loads because of the braking load. This combined loading problem requires simulation using coupled thermo-mechanical analysis for design evaluation. This work presents a combined thermal and mechanical finite element analysis and evolutionary optimization-...

In this present work, the laminar free convection boundary layer flow of a two-dimensional fluid over the vertical flat plate with a uniform surface temperature has been numerically investigated in detail by the similarity solution method. The velocity and temperature profiles were considered similar to all values and their variations are as a func...

Manuscript Number: NLM-D-24-00338 Analysis of Thermal Efficiency and Distribution in Porous Fins with Variable Profiles employing Homotopy Analysis Method Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decision, but also ena...

Dear Dr Belhocine Ali, Thank you for completing the review of the submission: Research on Hydrodynamic Characteristics of a 200 m×175 m Anchored-Offshore Photovoltaic Under Wind-Wave-Current Loads (JTAM-01082-2024-01) for Journal of Theoretical and Applied Mechanics. We appreciate your contribution to the quality of the work that we publish. Kind...

Manuscript Number: HFF-D-24-00195 Curing Analysis of Rubber Film on a Hand-Shaped Former in the Manufacturing of Rubber Gloves through Novel OpenFOAM Solver Kittipos Loksupapaiboon; Chakrit Suvanjumrat Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assi...

Manuscript ID ROB-23-0213 entitled "Design and Analysis of a Robotic Camouflage Vehicle for Unauthorized Person Detection" by Kulkarni, Neeraj P.; Khan, Subim N. has been submitted to Journal of Field Robotics. Dear Dr Belhocine Thank you for reviewing the manuscript ROB-23-0213. Your time and effort is greatly appreciated by the journal editors...

This is to thank each of our 7690 referees (35% more this year and most ever), by name, for contributing their precious time and expertise to Physics of Fluids. This year, we again enjoyed the generosity of our Physics of Fluids reviewer community. Figure 1 tracks its remarkable growth.1–10 Thanks to reviewer responsiveness, we handled our record 7...

Manuscript Number: IJTF-D-24-00064R1 Analysing the effects of Thermal and Surface Roughness of Plane Slider Bearing Using Finite Element method: Considering Heat Conduction through the Pad and Slider with Unsteady Fluid Flow Film Lubricant Girma Desu Tessema; Getachew Adamu Derese; Awoke Andargie Tiruneh Dear Dr Belhocine, Thank you for review...

Manuscript Number: MAGMA-D-24-00408 Thermal-magnetic Coupling Inhomogeneous Temperature Field Analysis of Cylindrical Eddy Current Brakes Yiduan Wang; Guolai Yang; Qing Le Wu Dear Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decisio...

Ref.: Ms. No. RINENG-D-24-00708 Investigation of the Precision of Reverse Engineering Boat Propeller Blade Components using the Photogrammetry Method Results in Engineering Dear Dr Belhocine, Thank You for your review of this manuscript. You may access your review comments and the decision letter (when available) by logging on to the Editorial M...

Manuscript Number: JMRT-D-24-01443 On the fabrication of finer grain structure through using finer wire diameter for wire arc additive manufacturing of AZ31B magnesium alloy Jae-Deuk Kim; Jooyong Cheon; Yeong-Do Park; Yang-Do Kim; Changwook Ji Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate you...

Dear Dr Ali Belhocine, Thank you for the review of paper entitled "Towards cross-modal misalignment-robust crowd counting in cross-modal engineering applications"; Manuscript Number: EAAI-23-9919, which has been submitted to Engineering Applications of Artificial Intelligence, which I just received. We are most grateful for your assistance for yo...

Manuscript Number: PADIFF-D-23-00341 Microarticle Numerical Calculation of Heat Transfer in Cylindrical Coordinates using Finite-Difference Method in Evaluating Temperature of Different Points of Radiopharmaceutical Vials Abdollah Khorshidi Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your co...

Manuscript Number: JMRT-D-24-00109 Interface design of carbon fiber composites by fabricating interlocked carbon nanotubes-silicon nitride nanowires Tiantian Wang; Leilei Zhang; Qian Gao; Bihan Zhang; Xinyi Wan; Haiyang Li; Hongchao Sheng; Hejun Li Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate y...

Manuscript Number: CSITE-D-24-00194 Research on heat dissipation of brake disc in the semi-enclosed space under high-speed train based on fluid-solid-thermal coupling method Shize Zheng; Jingxian ding; Jianyong Zuo Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not on...

Dear Dr. Belhocine: Thank you for reviewing manuscript TCSME-2023-0213 entitled " Research on braking performance and disc spring characteristics of electromechanical brake of mine hoist " for Transactions of the Canadian Society for Mechanical Engineering. On behalf of the Editors of Transactions of the Canadian Society for Mechanical Engineerin...

Ref: MSSP23-4439 Title: A Purely Centered and Non-redundant Piezoelectric Stick-slip Rotary Stage Authors: Shikun Ma; Yiling Yang; Yuguo Cui; Gaohua Wu; Yanding Wei Dear Dr Belhocine, Thank you for your review of this manuscript. You can access your review comments by logging onto the Editorial Manager site at: https://www.editorialmanager.com/y...

Manuscript Number: CSITE-D-23-04398 Development of novel computational models based on artificial intelligence technique to predict the viscosity of ionic liquids for thermal separation Longyi Ran Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me i...

Manuscript Number: JMRT-D-23-11377 A novel slip rate model for determining the interfacial contact state of friction stir welding Lin Nie; Yunxin Wu; Diqiu He Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decision, but also...

Manuscript Number: JESTCH-D-23-01461 Gas-liquid two-phase analysis model of oil charging system of parallel hydraulic retarder Maohan Xue; Yao Fu; Shaohua Sun; Xiaohu Geng; Yulong Lei Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my d...

In this paper, steady laminar boundary layer flow of a Newtonian fluid over a flat plate in a uniform free stream was investigated numerically when the surface plate is heated by forced convection from the hot fluid. This flow is a good model of many situations involving flow over fins that are relatively widely spaced. All the solutions given here...

Manuscript Number: CSCEE-D-23-00683 Numerical Calculation of Heat Transfer in Cylindrical Coordinates using Finite Difference Method in Evaluating Temperature of Different Points of Radiopharmaceutical Vials Abdollah Khorshidi Dear Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and ti...

Manuscript Number: THESCI-D-23-02757 Research on the evolution of friction hot spots in vehicle disc brake during braking based on experiment Dejian Meng; Birui Li; Lijun Zhang; Wenbo Li; Jianfeng Wu Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me...

Manuscript Number: HMT-D-23-03657R1 Optimized design through a thermofluid-dynamic analysis of a rotary elastoCaloric device Luca Cirillo; Adriana Greco; Claudia Masselli Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decision, but...

Dear Dr Ali Belhocine, Thank you for the review of paper entitled "High-quality Pattern Decoding of Large-scale Color Fabric"; Manuscript Number: EAAI-23-4548, which has been submitted to Engineering Applications of Artificial Intelligence, which I just received. We are most grateful for your assistance for your help in the review of this paper an...

Dear Dr Ali Belhocine, Thank you for the review of paper entitled "Neuraltalk+: Neural Image Captioning with Visual Assistance Capabilities"; Manuscript Number: EAAI-23-5670, which has been submitted to Engineering Applications of Artificial Intelligence, which I just received. We are most grateful for your assistance for your help in the review...

Manuscript Number: JMRT-D-23-08377 A review from the mechanism, influence and the elimination methods of Binder jetting 3d printing defects Kunlong Zhao; Zhenhua Su; Zhijie Ye; Wenxin Cao; Jinzhuo Pang; Xiaolei Wang; Zhuochao Wang; Xingchun Xu; Jiaqi Zhu Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appre...

Dear Dr Ali Belhocine, Thank you for the review of paper entitled "Image restoration in under-display camera of a smartphone through deep learning using pseudo-big data generated optically by angular spectrum method"; Manuscript Number: EAAI-23-7135, which has been submitted to Engineering Applications of Artificial Intelligence, which I just rece...

Manuscript Number: EFA-D-23-02344R2 Study on the Mechanism of Mechanical Properties Deterioration of Brake Disc Materials Zhiqiang Li; Jie Li; Cen Li; Xiaodong Xie; Zhiyong Yang Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decis...

Dear Dr Ali Belhocine: Thank you for reviewing The manuscript, "Multi-source Directional Heat Conduction Method Based on Coordinate Transformation" for Numerical Heat Transfer, Part B: Fundamentals. We greatly appreciate the voluntary contribution that each reviewer gives to the Journal. We hope that we may continue to seek your assistance with t...

Dear Dr Ali Belhocine: Thank you for reviewing the above manuscript, entitled "Optimized design of brake pad structure based on response surface methodology" for Mechanics Based Design of Structures and Machines, An International Journal. We greatly appreciate the voluntary contribution that each reviewer gives to the Journal. We hope that we may...

Ms. Ref. No.: ISATRANS-D-23-01011R1 Title: Asymmetric morphological filter for roughness evaluation of multifunctional surfaces ISA Transactions Dear Dr Ali Belhocine, Thank you for taking the time to review the above-referenced manuscript. You can access your comments and the decision letter when it becomes available. To access your comments an...

Dear Dr Ali Belhocine: Thank you for reviewing the above manuscript, entitled "Optimized design of brake pad structure based on response surface methodology" for Mechanics Based Design of Structures and Machines, An International Journal. We greatly appreciate the voluntary contribution that each reviewer gives to the Journal. We hope that we may...

Dear Dr Belhocine, As a respected reviewer at Hindawi, we'd like to extend our gratitude for the dedicated time you've invested in reviewing new research. Peer review plays a vital role in shaping the path of each published article, and we are excited to present you with an overview of your reviewing contributions so far in 2023. To recognize you...

Dear Dr. Belhocine, Please find attached the acceptance letter of your paper (Ref. No: SCI-2209-7139). With Regards, M. Marefati, Editorial Assistant Civil & Mechanical Transactions, Scientia Iranica Tel: +98 (0) 21 66164092

Manuscript Number: ENGSTRUCT-D-23-04556 Experimental verification of high-speed rail brake pads as passive friction energy-dissipative shims Dingbin Li; Yun Zhou; Qian Zhang; Jinxiong Hong; Wenchen Lie Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only as...

Thank you for reviewing manuscript GENO-2023-0485 entitled Structural design and mechanical properties optimization of a balanced fiber-reinforced rubber hose for Engineering Optimization. The Editors are grateful for the voluntary contribution of every reviewer for the Journal. Your comments are very much appreciated. In support of your ongoing...

Manuscript Number: CSITE-D-23-02596 Mesoscopic Thermal Field Reconstruction and Parametrical Studies of Heterogeneous Rock-filled Concrete at Early Age Xiaorong Xu; Ting Liang; Shunyao Yu; Feng Jin; Anrui Xiao Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only...

Ms. Ref. No.: TRIBINT-D-23-02129 Title: Residual stress development and thermo-elasto-plastic distortion in brake discs Tribology International Dear Dr. Ali Belhocine, Thank you for your review of this manuscript. You may access your review comments and the decision letter (when available) by logging onto the Editorial Manager at https://www.edi...

Ref.: Ms. No. RINENG-D-23-01884 Fractional viscoelastic models for the estimation of frequency response of rubber bushings based on relaxation tests Results in Engineering Dear Dr Belhocine, Thank You for your review of this manuscript. You may access your review comments and the decision letter (when available) by logging on to the Editorial Ma...

Manuscript Number: AEUE-D-23-00403 Thermal Camera for System-in-Package (SiP) Technology: Transient Thermal Analysis based on FPGA and Finite Element Method (FEM) AZIZ OUKAIRA; Dhaou Said; Idir Mellal; Ouafaa Ettahri; Jamal Zbitou; Ahmed Lakhssassi Dear Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate y...

Dear Dr Ali Belhocine, Thank you for the review of paper entitled "Semantic Segmentation-Based Detection for Improving OCR Performance in Container Terminals"; Manuscript Number: EAAI-23-4799, which has been submitted to Engineering Applications of Artificial Intelligence, which I just received. We are most grateful for your assistance for your h...

Ref.: Ms. No. ICHMT-D-23-01535 An optimized time-adaptive aero-thermal coupling calculation method for the flow and heat transfer analysis of disc cavity system International Communications in Heat and Mass Transfer Dear Belhocine, I would like to gratefully acknowledge the receipt of your valuable review comments for the above submission to the...

Dear Dr belhocine ali, Thank you for completing the review of the submission: Numerical study on the influence of top and valley shape of transverse groove on drag-reduction rate (JTAM-00864-2023-02) for Journal of Theoretical and Applied Mechanics. We appreciate your contribution to the quality of the work that we publish. Kind regards, Elżbieta...

Manuscript Number: CEPPI-D-23-00563 Numerical Modeling and Evaluation of Solid-Liquid Extraction with Pressurized Hot Water Extraction Applied to Robinia Pseudoacacia wood Diakaridia Sangaré; Flore Caré; Stéphane Bostyn; Frédéric Buron; Pierre Lafite Dear Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate...

Manuscript Number: ENGSTRUCT-D-23-03178 Numerical analysis of high-strength centrifugal precast RC hollow pipe columns using grouted corrugated duct connection: confinement effect and ductility evaluation Sibo Su; Guangda Zhang; Qiang Han; Jiexin Yu; Xianzhuo Jia; Xiuli Du Dear Dr Belhocine, Thank you for reviewing the above referenced manusc...

Dear Dr Belhocine, Re: "Measurement and evaluation of time-varying meshing stiffness of faulty gears under different types" Manuscript reference: MST-116968.R1 Thank for you reviewing this Paper for Measurement Science and Technology. We are committed to improving our reviewer experience and would like to ask for your feedback on the process of...

Case Studies in Thermal Engineering <em@editorialmanager.com> À : belhocine ali sam. 17 juin à 15:33 Manuscript Number: CSITE-D-23-01675 Influence of embankment slope orientation on near-surface heat and moisture conditions in a high-altitude permafrost region, Tibetan Plateau Li Wenjiao; Zhanju Lin; Xingwen Fan; Miaomiao Yao; Xuyang Wu Dear...

Dear Dr Ali Belhocine, Thank you for the review of paper entitled "A p roduct co-design team performance evaluation method with considering both the satisfaction and collaboration"; Manuscript Number: EAAI-22-1967, which has been submitted to Engineering Applications of Artificial Intelligence, which I just received. We are most grateful for your...

Manuscript Number: CSITE-D-23-01161 Energy performance of direct-expansion solar heat pump integrated with thermal network MINHWI KIM; Deukwon Kim; Jaehyeok Heo; Dongwon Lee Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decision,...

Review of the manuscript number JTAM-00864-2023-01 Dear Dr Belhocine Ali, Thank you for completing the review of the submission: Numerical study on the influence of top and valley shape of transverse groove on drag-reduction rate (JTAM-00864-2023-01) for Journal of Theoretical and Applied Mechanics. We appreciate your contribution to the quality...

High-quality academic publishing is built on rigorous peer review. Coatings was able to uphold its high standards for published papers due to the outstanding efforts of our reviewers. Thanks to the efforts of our reviewers in 2022, the median time to first decision was 14 days and the median time to publication was 36 days. Regardless of whether th...

04-Apr-2023 Dear Dr belhocine: Thank you for reviewing manuscript # UTRB-5597.R1 entitled "Thermal Simulation of Ventilated Brake Disc Based on Complex Multi-Field Coupled Method" for Tribology Transactions. On behalf of STLE, we appreciate the voluntary contribution that each reviewer gives to the Journal. We thank you for your participation in...

Alan Jeffrey Giacomin, Editor-in-Chief Mechanical Engineering Department, University of Nevada, Reno, Nevada 89557, USA This is to thank each of our 5708 referees (36% more this year), by name, for contributing their precious time and expertise to Physics of Fluids. This year, we again enjoyed the generosity of our reviewer community. Figure 1 trac...

Ref: MSSP23-1098 Title: Adaptation of rectangular and trapezoidal time functions to simulate rotational motion of the brake disc Authors: Piotr Grzes Dear Dr Belhocine, Thank you for your review of this manuscript. You can access your review comments by logging onto the Editorial Manager site at: https://www.editorialmanager.com/ymssp/. Your us...

Manuscript Number: CSITE-D-23-00627 Thermal Management and Heat Flux Reduction of Shelter Building Walls by PCM Macro-Encapsulation Masoud Izadi; Seyede Fateme Taghavi; Seyed Hossein Neshat Safavi; Farhad Afsharpanah; Wahiba Yaïci Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and...

Manuscript Number: CSITE-D-23-00996 Numerical simulation on combustion characteristics in a 660MW tangentially fired pulverized coal boiler with deep peak-load regulation Hao Lu; Shangwen Huang; Hongchang Li; Zening Cheng; Xiqiang Chang; Lijiang Dong; Dean Kong; Xuehui Jing Dear Dr ali, Thank you for reviewing the above referenced manuscript....

Manuscript Number: CSITE-D-23-00907 Analysis and optimization of an axial-radial hybrid ventilation generator‘s cooling structure based on an orthogonal design experiment Chenqi Tang; Zhongjun Yu; Jia Fu; Juntan Yang Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not o...

Dear: Dr. Ali Belhocine Paper ID : JTEN-2023-86 Title : Numerical Study of Thermal Behavior of A Concrete Gravity Dam During Service Life: A Case Study We have received the manuscript for possible publication in the "Journal of Thermal Engineering". As I believe it is in your field of expertise, I had the liberty to send you this message to ask fo...

Manuscript Number: CSITE-D-23-00227 Optimization Design of a New Type Cooler for Positive Pressure Enclosure Asynchronous Motor Mengmeng Ai; Huan Wang; Yuwei Liu Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decision, but also en...

Dear Dr. Ali Belhocine, We are pleased to acknowledge your help in reviewing manuscript(s) for (NPE) Nanotechnology and Precision Engineering. Without your efforts, the quality of NPE would not be what it is. The Editors thank you profoundly and hope you will keep up your good work and perhaps even join us as a member of the Editorial Board or Ear...

Manuscript Number: FINMEC-D-23-00033 Comprehensive analysis and economic study of railway brake failure from metal-based and composites-based materials Muhammad Akhsin Muflikhun; Mayradaffa Adyudya; Nur Fatah Rahman; Jayan Sentanuhady; Swathi Naidu Vakamulla Raghu Dear Belhocine, Thank you for reviewing the above referenced manuscript. I great...

Ref.: Ms. No. RINENG-D-23-00291 Natural Convection and Entropy Generation Inside a Square Chamber Divided by a Corrugated Porous Partition Results in Engineering Dear Dr Belhocine, Thank You for your review of this manuscript. You may access your review comments and the decision letter (when available) by logging on to the Editorial Manager site...

Ms. Ref. No.: ISATRANS-D-23-00073 Title: Improvement of Load Frequency Control for Two-Area Modern Power Systems Involving Renewable Energy Sources Using a Novel Cascade Controller ISA Transactions Dear Dr Ali Belhocine, Thank you for taking the time to review the above-referenced manuscript. You can access your comments and the decision letter w...

Manuscript Number: CSITE-D-23-00087 Numerical analysis of a novel miniature Joule-Thomson cryocooler Zhicheng Pan; Ruiping Zhang; Taihe Huang; Xiaoyong Li; Ling Wang; Xiaoqing Zhang; Jianye Chen Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in...

Ref.: Ms. No. ICHMT-D-23-00128 Accurate and Nonuniform Magnetic-Thermal Analysis of Distribution Transformers: Experimental Validation via Optical Fiber Sensors and Thermography Measurement International Communications in Heat and Mass Transfer Dear Belhocine, I would like to gratefully acknowledge the receipt of your valuable review comments for...

Manuscript Number: CSITE-D-23-00214 Enhancing heat transfer in carbon/carbon composite structure by coupling deep learning and genetic algorithm Heye Xiao; Zelin Wang; Hui Wang; Ritian Ji; Peixun Yu Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me...

Ms. Ref. No.: CJOA-D-23-00031 Title: Gear walk instability caused by brake-disc friction characteristics Chinese Journal of Aeronautics Dear Dr Ali Belhocine, Thank you for taking the time to review the above-referenced manuscript. You can access your comments and the decision letter when it becomes available. To access your comments and the dec...

Manuscript Number: NLM-D-22-00689 On the pressure–deflection relations and instability of carbon-based composite nonlinear pipes Dear Dr Belhocine, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decision, but also enables the author(s) to diss...

Manuscript Number: THESCI-D-22-02719 A first estimate of thermal contraction of the boundary layer as active flow control technique Francisco Arias Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decision, but also enables the auth...

Dear Mr. belhocine: Thank you for reviewing manuscript # HTJ-08-2022-OA-0647.R1 entitled "Frictional Material Selection of Dry Clutch Disc Based on the Weighted Factor and Finite Element Methods" for Heat Transfer. On behalf of the Editors of Heat Transfer, we appreciate the voluntary contribution that each reviewer gives to the Journal. We thank...

Dear Dr Ali Belhocine, Thank you for the review of paper entitled "Thermal Parameter Analysis and Model Update of the Space Manipulator Joint"; Manuscript Number: EAAI-22-5750, which has been submitted to Engineering Applications of Artificial Intelligence, which I just received. We are most grateful for your assistance for your help in the revie...

Manuscript Number: HMT-D-22-04468 Performance Modeling of Quartz Tube for Gravity-Driven Solid Particle Solar Receiver Yupu Yu; Fengwu Bai; Zhifeng Wang Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in reaching my decision, but also enables the...

Manuscript Number: HMT-D-22-04822 Application of the temperature oscillation method to laminar flow in a straight horizontal and curved minichannels Stanislav Solnař; Stefan Haase; Tomáš Jirout Dear Dr ali, Thank you for reviewing the above referenced manuscript. I greatly appreciate your contribution and time, which not only assisted me in rea...

From the aspect of traffic safety, the brake system is one of the most important systems. For all exploitation conditions, for which vehicles are projected, and for loads in prescribed boundaries, no matter to the vehicle speed, it is important, for the brake system to be reliable and to provide a very fast stop, or speed adjustment to road conditi...

Dear belhocine ali, Thank you for completing the review of the submission: Investigation of Pad Stiffness Effects on the Initiation of Brake Squeal Phenomenon (JTAM-00767-2022-01) for Journal of Theoretical and Applied Mechanics. We appreciate your contribution to the quality of the work that we publish. Kindest regards, Prof. Oleksandr Jewtushen...

Ref.: Ms. No. RINENG-D-22-01882 Evaluation of AGM and FEM method for warm radiation on nanofluid stream between two tubes in nearness of Magnetism amplitude Results in Engineering Dear Dr Belhocine, Thank You for your review of this manuscript. You may access your review comments and the decision letter (when available) by logging on to the Edit...

Ref: MSSP22-3360 Title: A new method for evaluating the dynamic behaviours of a train braking system considering disc–block interface characteristics Authors: Quan Wang; Zhiwei Wang; Jiliang Mo; Song Zhu; Qingbing Gou Dear Dr Belhocine, Thank you for your review of this manuscript. You can access your review comments by logging onto the Editoria...

Dear Authors, Good day! Please find the Acceptance letter attached below. Thank you Regards, Mrs Jisha Sara Journal Of Engineering Research Kuwait University