Independent Researcher
Question
Asked 22 January 2024
What is the critical Capillary Number in a microchannel?
What should be the Capillary Number obtained for water flow inside a silicone microchannel so that we can ignore the Capillary Effect in this study?
My study investigated forced flow with Reynolds numbers between 125 and 1300.
If our criterion for the capillary number is 1, and we consider the capillary effect non-negligible for low values of 1, according to the capillary equation, the capillary effect cannot be neglected in many conditions and cases. For this reason, I think the value of 1 is not a critical value.
Also, the denominator of the capillary number equation is related to the surface tension parameter. Is the value of this parameter equal to 0.0726 N/m, which is the surface tension between water and air, or should we put the surface tension between water and a solid wall (silicon)? In many research studies, authors have used the value of 0.0726 N/m.
Ca=μ*U/σ
Most recent answer
In discussions regarding the appropriate Capillary Number (Ca) for ignoring capillary effects in microchannel studies, it's essential to consider the context of the interface interactions. Typically, for water flow inside silicone microchannels, many studies, including mine, use the water-air surface tension value of 0.0726 N/m. This is generally because the dominant interface under investigation is between the water and air, not between the water and the silicone walls, unless specific surface modifications of the silicone suggest otherwise.
Furthermore, concerning the critical value of Ca, while the standard threshold is often set at Ca = 1, I believe this may not be universally applicable. In my study, which investigates forced flow with Reynolds numbers between 125 and 1300, it appears that capillary effects could be non-negligible even above this threshold. This observation leads me to suggest that the traditional threshold of Ca = 1 might need adjustment based on specific experimental conditions and flow behaviors. Such an approach allows for a more nuanced understanding of when viscous forces indeed dominate over capillary forces in practical scenarios
Farshid Hesami
All Answers (4)
Bangladesh University of Engineering and Technology
The critical capillary number in a microchannel is a dimensionless number that characterizes the balance between viscous and capillary forces in determining the flow behavior of fluids in microscale channels.
University of Mohaghegh Ardabili
Md. Al-Amin, why did you explain the capillary number? My question is about the critical value of this parameter.
Rajalakshmi Engineering College
The critical capillary number in a microchannel is a dimensionless number that characterizes the transition between different flow regimes dominated by the interplay between viscous and capillary forces. It doesn't have a single, fixed value and can vary depending on several factors, including:
- Channel geometry: The cross-sectional shape and dimensions of the microchannel can significantly influence the critical capillary number. For example, rectangular channels generally have a lower critical capillary number than circular channels.
- Fluid properties: The viscosity and surface tension of the fluids involved play a crucial role in determining the critical capillary number. Higher viscosity or lower surface tension will lead to a higher critical capillary number.
- Flow conditions: The flow rate and pressure can also affect the critical capillary number. Higher flow rates or pressures will generally lead to a higher critical capillary number.
In microfluidics, the critical capillary number (Ca)cr for a common mini channel (larger than typical micro channels) can vary based on specific factors such as channel dimensions, fluid properties, and surface tension. However, for mini channels, the transition from viscous-dominated to capillary-dominated flow might occur in the range of 0.01 to 0.1.
For a common micro channels it might occur in the range of 0.001 to 0.1
- Droplet formation: For droplet formation in T-junction microchannels, the critical capillary number typically lies between 0.01 and 0.1. Below this range, continuous flow persists, while above it, discrete droplets start to form.
- Thread-to-drop transition: In some microfluidic devices, a transition from a continuous thread-like liquid flow to the formation of separate droplets can occur. The critical capillary number for this transition can vary depending on the specific geometry and flow conditions, but it is typically in the range of 0.1 to 1.
- Capillary fingering: When a less viscous fluid displaces a more viscous fluid in a porous medium, a phenomenon called capillary fingering can occur, where the less viscous fluid fingers its way through the medium. The critical capillary number for the onset of capillary fingering typically lies between 10^-4 and 10^-6.
Independent Researcher
In discussions regarding the appropriate Capillary Number (Ca) for ignoring capillary effects in microchannel studies, it's essential to consider the context of the interface interactions. Typically, for water flow inside silicone microchannels, many studies, including mine, use the water-air surface tension value of 0.0726 N/m. This is generally because the dominant interface under investigation is between the water and air, not between the water and the silicone walls, unless specific surface modifications of the silicone suggest otherwise.
Furthermore, concerning the critical value of Ca, while the standard threshold is often set at Ca = 1, I believe this may not be universally applicable. In my study, which investigates forced flow with Reynolds numbers between 125 and 1300, it appears that capillary effects could be non-negligible even above this threshold. This observation leads me to suggest that the traditional threshold of Ca = 1 might need adjustment based on specific experimental conditions and flow behaviors. Such an approach allows for a more nuanced understanding of when viscous forces indeed dominate over capillary forces in practical scenarios
Farshid Hesami
Related Publications
In this article, we construct a novel 1D-model of microfluidic laminar flows in tapered circular and rectangular channels assuming the flow in channels fully developed. In the model, we take into account the inertance and dynamic pressure terms. The model can be used for a wide range of flows: from the pure capillary flow regime, where the capillar...
In this article, we construct a novel one-dimensional model of microfluidic laminar flows in tapered circular and rectangular channels assuming the flow in channels fully developed. In the model, we take into account the inertance and dynamic pressure terms. The model can be used for a wide range of flows: from the pure capillary flow regime, where...
Wavy walls are investigated in this paper as a passive scheme to improve the heat transfer performance of low Reynolds number laminar flows in microchannel heat sinks for electronics cooling applications. Three-dimensional laminar fluid flow and heat transfer characteristics in micro-wavy channels are numerically studied for a 500 μm hydraulic diam...