École Nationale Supérieure des Ingénieurs en Arts Chimiques et Technologiques

A study on the effect of bond coating (BC) surface modifications prior to ceramic deposition is presented. Grit blasting and polishing were used to modify the BC surface finish. Thermal barrier coating (TBC) systems were made of a commercial yttria-stabilized zirconia (YSZ) deposited by electron beam physical vapor deposition on a β-(Ni,Pt)Al-coated Ni-based single crystal superalloy. Surface roughness measurements and scanning electron microscopy observations, before and after thermal cycling at 1100 °C, were performed to investigate the influence of the initial surface treatment on the YSZ/BC interface morphology and top coat spallation resistance. Surface states enhancing TBC spallation resistance have been found. In particular, it is shown that rumpling can be avoided even in the presence of phase transformations in the BC, by grinding samples with P600 SiC paper or by applying an “heavy” grit blasting leading to a thinner BC.

Prosthechea karwinskii is an endemic orchid of Mexico with cultural significance for its ornamental, food, religious, and medicinal uses. In traditional medicine, diabetic patients use the leaves of this plant to lower glucose levels. The present study evaluated the effect of P. karwinskii leaves extract on the antioxidant enzymes superoxide dismutase (SOD) and catalase (CAT) in a model of obese rats with insulin resistance for its nutraceutical potential to reduce insulin resistance and oxidative stress. Obesity and insulin resistance were induced with 40% sucrose in water for 20 weeks. Four groups (control rats, obese rats, obese rats administered the extract, and obese rats administered metformin) were evaluated. Extract compounds were identified by UHPLC-ESI-qTOF-MS/MS. Glucose , insulin, triglyceride, and insulin resistance indices (HOMA-IR and TyG), as well as the activity of the antioxidant enzymes, increased in rats in the obese group. Administration of P. karwinskii extract and metformin reduced glucose, insulin, triglyceride, and insulin resistance indices and antioxidant enzyme activity to values similar to those of the control group. Therefore, this study shows the nutraceutical potential of P. karwinskii extract as an ingredient in the formulation of dietary supplements or functional foods to help treat diseases whose pathophysiology is related to oxidative stress and insulin resistance.

The increasing use of plastics has led to increased dump heaps of industrially and domestically generated plastic waste in the environment due to poor plastic waste disposal management, which are sources of serious environmental pollution due to associated non-renewable fossil sources. The limited nature of fossil fuels, which are the major source of plastic, have made circular economy approaches more attractive, which bring about sustainability via plastic waste reduction, recycling, and reuse. Pyrolysis of plastic in a thermal reactor free from O2 interference at a temperature range of 300–800 °C degrades larger polymeric chains in plastics into lighter and higher-value-added oil derivatives, which could serve the purpose of domestic or industrial fuel and raw materials for making new plastics. Pyrolysis releases less environmental pollutants as compared to conventional methods of waste management (combustion, incineration, and landfilling). The present study provides a comprehensive analysis of the complex composition of plastic waste and the consequential ramifications for conventional waste management methodologies. The paper explores the fundamental principles of pyrolysis, emphasising the significance of temperature, reaction medium, and catalysts in increasing product yields and pyrolysis oil quality. This study provides a comprehensive insight of advanced analytical methods, including spectroscopy, chromatography, and microscopy, that are used for the characterization of pyrolysis products. The utilisation of these techniques allows for a more profound comprehension of reaction pathways. Moreover, this study discusses the several pyrolysis products that arise from the process of plastic pyrolysis, including liquid fuels, gases, and solid wastes, and highlights their possible utilisation in a wide range of sectors. The adaptability of pyrolysis technology and its contribution to resource efficiency are shown by its emphasis on transforming waste plastics into chemicals, fuels, and feedstocks via the process of upcycling. Economic feasibility and environmental impacts are also evaluated, considering energy consumption, emissions, and life cycle assessments to provide a holistic perspective on the sustainability of pyrolysis-based circular economy solutions. This paper underscores the importance of regulatory frameworks and policy incentives to foster the integration of pyrolysis technologies into existing waste management systems. Additionally, challenges related to feedstock variability, scale-up, and technology optimisation are discussed alongside ongoing research efforts and potential future directions.

A study on the effect of bond boating (BC) surface modifications prior ceramic deposition is presented. Grit blasting and polishing were used to modify the BC surface finish. thermal barrier coatings (TBC) systems were made of a commercial yttria-stabilized zirconia (YSZ) deposited by electron beam physical vapor deposition on a β−(Ni,Pt)Al coated Ni-based single crystal superalloy. Surface roughness measurements and scanning electron microscopy observations, before and after thermal cycling at 1100°C, were performed to investigate the influence of the initial surface treatment on the YSZ/BC interface morphology and top coat spallation resistance. Surface states enhancing TBC spallation resistance have been found. In particular, it is shown that rumpling can be avoided even in the presence of phase transformations in the BC, by grinding samples with P600 SiC paper or by applying an “heavy” grit blasting leading to a thinner BC.

Cellulosic fibers obtained from Barley straw were utilized to reinforce PHB. Four different processed fibers were employed as reinforcing material: sawdust (SW), defibered (DFBF), delignified (DBF), and bleached (BBF) fibers. The composite was processed from two different perspectives: a discontinuous (bach) and an intensification process (extrusion). Once processed and transformed into final shape specimens, the materials were characterized by mechanical testing (tensile mode), scanning electron microscopy, and theoretical simulations by finite elements analysis (FEA). In terms of mechanical properties, only the elastic moduli (Et) exhibited results ranging from 37% to 170%, depending on the reinforcement composition. Conversely, strengths at break, under both tensile and bending tests, tended to decrease, indicating poor affinity between the components. Due to the mechanical treatment applied on the fiber, DFBF emerged as the most promising filler, with mechanical properties closest to those of neat PHB. DFBF-based composites were subsequently produced through process intensification using a twin-screw extruder, and molded into flowerpots. Mechanical results showed almost identical properties between the discontinuous and intensification processes. The suitability of the material for agriculture flowerpots was demonstrated through finite analysis simulation (FEA), which revealed that the maximum von Mises stresses (5.38 × 105 N/m2) and deformations (0.048 mm) were well below the limits of the composite materials.

C4F7N [2,3,3,3-tetrafluoro-2-(trifluoromethyl)propanenitrile]/CO2 gas mixtures are being developed as an eco-friendly electrical insulator to replace SF6, the most potent greenhouse industrial gaseous dielectric. However, recent studies have reported complicated and often conflicting decomposition pathways for C4F7N/CO2 gas mixtures, which has raised concerns. In this work, the decomposition characteristics of C4F7N/CO2 gas mixtures were studied comprehensively by both designed computations and experiments. Computations were performed starting from fundamental propositions of C4F7N/CO2 decompositions, which were further experimentally verified by pyrolysis, long-term thermal aging with/without catalytic materials (industrial-grade molecular sieves 4A), and electrical decomposition by spark discharge. The results of both computations and experiments suggest that in an ideal thermal decomposition, C4F7N is likely to decompose into C2F6 and small fluoronitriles first at high temperatures. The generation of C3F6 and C2N2 from C4F7N thermal decomposition at lower temperatures appears because of the catalytic effect of incompatible materials, for example, the industrial-grade molecular sieves 4A that we tested. The electron impact dissociation of C4F7N plays an important role in C4F7N electrical decomposition, leading to additional formation of distinctive small molecules of CF4 and C2N2 of low concentrations. It was pointed out based on a real arcing test in a load disconnector that the decomposition of C4F7N gas mixtures in real applications will be at a much moderate and manageable rate than what was obtained from the highly accelerated laboratory tests presented in this work. The signatures of decomposition products extracted in this study provide invaluable guidance for developing decomposition-based diagnosis and fixation of decomposition byproducts toward SF6-free power grids.

The honey bee is an important pollinator insect susceptible to environmental contaminants. We investigated the effects of a waste fire event on elemental content, oxidative stress, and metabolic response in bees fed different nutrients (probiotics, Quassia amara, and placebo). The level of the elements was also investigated in honey and beeswax. Our data show a general increase in elemental concentrations in all bee groups after the event; however, the administration of probiotics and Quassia amara help fight oxidative stress in bees. Significantly lower concentrations of Ni, S, and U for honey in the probiotic group and a general and significant decrease in elemental concentrations for beeswax in the probiotic group and Li in the Quassia amara group were observed after the fire waste event. The comparison of the metabolic profiles through pre- and post-event PCA analyses showed that bees treated with different feeds react differently to the environmental event. The greatest differences in metabolic profiles are observed between the placebo-fed bees compared to the others. This study can help to understand how some stress factors can affect the health of bees and to take measures to protect these precious insects.

The interaction between metal particles and the oxide support, the so-called metal–support interaction, plays a critical role in the performance of heterogenous catalysts. Probing the dynamic evolution of these interactions under reactive gas atmospheres is crucial to comprehending the structure–performance relationship and eventually designing new catalysts with enhanced properties. Cobalt supported on TiO2 (Co/TiO2) is an industrially relevant catalyst applied in Fischer−Tropsch synthesis. Although it is widely acknowledged that Co/TiO2 is restructured during the reaction process, little is known about the impact of the specific gas phase environment at the material’s surface. The combination of soft and hard X-ray photoemission spectroscopies are used to investigate in situ Co particles supported on pure and NaBH4-modified TiO2 under H2, O2, and CO2:H2 gas atmospheres. The combination of soft and hard X-ray photoemission methods, which allows for simultaneous probing of the chemical composition of surface and subsurface layers, is one of the study’s unique features. It is shown that under H2, cobalt particles are encapsulated below a stoichiometric TiO2 layer. This arrangement is preserved under CO2 hydrogenation conditions (i.e., CO2:H2), but changes rapidly upon exposure to O2. The pretreatment of the TiO2 support with NaBH4 affects the surface mobility and prevents TiO2 spillover onto Co particles.

Biological applications of microfluidics technology is beginning to expand beyond the original focus of diagnostics, analytics and organ-on-chip devices. There is a growing interest in the development of microfluidic devices for therapeutic treatments, such as extra-corporeal haemodialysis and oxygenation. However, the great potential in this area comes with great challenges. Haemocompatibility of materials has long been a concern for blood-contacting medical devices, and microfluidic devices are no exception. The small channel size, high surface area to volume ratio and dynamic conditions integral to microchannels contribute to the blood-material interactions. This review will begin by describing features of microfluidic technology with a focus on blood-contacting applications. Material haemocompatibility will be discussed in the context of interactions with blood components, from the initial absorption of plasma proteins to the activation of cells and factors, and the contribution of these interactions to the coagulation cascade and thrombogenesis. Reference will be made to the testing requirements for medical devices in contact with blood, set out by International Standards in ISO 10993-4. Finally, we will review the techniques for improving microfluidic channel haemocompatibility through material surface modifications—including bioactive and biopassive coatings—and future directions.

Vietnam has diverse and long-established tea plantations but scientific data on the characteristics of Vietnamese teas are still limited. Chemical and biological properties including total polyphenol and flavonoid contents (TPCs and TFCs), antioxidant activities (DPPH, ABTS, FRAP, and CUPRAC), as well as the contents of caffeine, gallic acid, and major catechins, were evaluated for 28 Vietnamese teas from North and South Vietnam. Higher values of TPCs and TFCs were found for green (non-oxidised) and raw Pu’erh (low-oxidised) teas from wild/ancient tea trees in North Vietnam and green teas from cultivated trees in South Vietnam, as compared to oolong teas (partly oxidised) from South Vietnam and black teas (fully oxidised) from North Vietnam. The caffeine, gallic acid, and major catechin contents depended on the processing, geographical origin, and the tea variety. Several good Pearson’s correlations were found (r2 > 0.9) between TPCs, TFCs, the four antioxidant capacities, and the content of major catechins such as (–)-epicatechin-3-gallate and (–)-epigallocatechin-3-gallate. Results from principal component analysis showed good discriminations with cumulative variances of the first two principal components varying from 85.3% to 93.7% among non-/low-oxidised and partly/fully oxidised teas, and with respect to the tea origin.

This work revisits hydrogen insertion in the wurtzite beryllium oxide in order to fill the gap in scientific knowledge regarding the diffusion coefficients of the different chemical states of hydrogen (neutral, charged, or molecular). Both first‐principle and macroscopic models were used to this end. In the former, two exchange‐correlation functionals (PBE and SCAN) were used to compute the properties of interest and accuracy was then discussed. Regarding the behavior of interstitial insertion of hydrogen, this work is slightly different from previous works; hydrogen was mainly found in the form of charged H⁻ or H⁺ ions, depending on experimental conditions. In regard to diffusivity properties, a complex migration pathway was found for hydrogen cation. Finally, the present study succeeded in producing a reliable set of diffusion coefficients for neutral, charged, and molecular hydrogen.

The development of specific and sensitive immunomagnetic cell separation nanotechnologies is central to enhancing the diagnostic relevance of circulating tumor cells (CTCs) and improving cancer patient outcomes. The limited number of specific biomarkers used to enrich a phenotypically diverse set of CTCs from liquid biopsies has limited CTC yields and purity. The ultra‐high molecular weight mucin, mucin16 (MUC16) is shown to physically shield key membrane proteins responsible for activating immune responses against ovarian cancer cells and may interfere with the binding of magnetic nanoparticles to popular immunomagnetic cell capture antigens. MUC16 is expressed in ≈90% of ovarian cancers and is almost universal in High Grade Serous Epithelial Ovarian Cancer. This work demonstrates that cell bound MUC16 is an effective target for rapid immunomagnetic extraction of expressor cells with near quantitative yield, high purity and viability from serum. The results provide a mechanistic insight into the effects of nanoparticle physical properties and immunomagnetic labeling on the efficiency of immunomagnetic cell isolation. The growth of these cells has also been studied after separation, demonstrating that nanoparticle size impacts cell‐particle behavior and growth rate. These results present the successful isolation of “masked” CTCs enabling new strategies for the detection of cancer recurrence and select and monitor chemotherapy.

A new selective and efficient catalytic system for magnetically induced catalytic CO2 methanation was developed, composed of an abundant iron‐based heating agent, namely a commercial iron wool, combined with supported Nickel nanoparticles (Ni NPs) as catalysts. The effect of metal oxide support was evaluated by preparing different 10 wt % Ni catalyst (TiO2, ZrO2, CeO2, and CeZrO2) via organometallic decomposition route. As‐prepared catalysts were thoroughly characterized using powder X‐ray diffraction, electron microscopy, elemental analysis, vibrating sample magnetometer, and X‐ray photoelectron spectroscopy techniques. High conversion and selectivity toward methane were observed at mid‐temperature range, hence improving energy efficiency of the process with respect to the previous results under magnetic heating conditions. To gain further insight into the catalytic system, the effects of the synthesis method and of 0.5 wt % Ru doping were evaluated. Finally, the dynamic nature of magnetically induced heating was demonstrated through fast stop‐and‐go experiments, proving the suitability of this technology for the storage of intermittent renewable energy through P2G process.

Rising climate change ambitions require large-scale clean hydrogen production in the near term. “Blue” hydrogen from conventional steam methane reforming (SMR) with pre-combustion CO2 capture can fulfil this role. This study therefore presents techno-economic assessments of a range of SMR process configurations to minimize hydrogen production costs. Results showed that pre-combustion capture can avoid up to 80% of CO2 emissions cheaply at 35 €/ton, but the final 20% of CO2 capture is much more expensive at a marginal CO2 avoidance cost around 150 €/ton. Thus, post-combustion CO2 capture should be a better solution for avoiding the final 20% of CO2. Furthermore, an advanced heat integration scheme that recovers most of the steam condensation enthalpy before the CO2 capture unit can reduce hydrogen production costs by about 6%. Two hybrid hydrogen production options were also assessed. First, a “blue-green” hydrogen plant that uses clean electricity to heat the reformer achieved similar hydrogen production costs to the pure blue configuration. Second, a “blue-turquoise” configuration that replaces the pre-reformer with molten salt pyrolysis for converting higher hydrocarbons to a pure carbon product can significantly reduce costs if carbon has a similar value to hydrogen. In conclusion, conventional pre-combustion CO2 capture from SMR is confirmed as a good solution for kickstarting the hydrogen economy, and it can be tailored to various market conditions with respect to CO2, electricity, and pure carbon prices.

A survey of plant-based wastes identified sunflower (Helianthus annuus) bark extract (SBE), produced via twin-screw extrusion, as a potential biostimulant. The addition of SBE to Arabidopsis (Arabidopsis thaliana) seedlings cultured in vitro showed a dose-dependent response, with high concentrations causing severe growth inhibition. However, when priming seeds with SBE, a small but significant increase in leaf area was observed at a dose of 0.5 g of lyophilized powder per liter. This optimal concentration of SBE in the culturing medium alleviated the growth inhibition caused by 100 mM NaCl. The recovery in shoot growth was accompanied by a pronounced increase in photosynthetic pigment levels and a stabilization of osmotic homeostasis. SBE-primed leaf discs also showed a similar protective effect. SBE mitigated salt stress by reducing the production of reactive oxygen species (ROS) (e.g., hydrogen peroxide) by about 30% and developing more expanded true leaves. This reduction in ROS levels was due to the presence of antioxidative agents in SBE and by activating ROS-eliminating enzymes. Polyphenols, carbohydrates, proteins, and other bioactive compounds detected in SBE may have contributed to the cellular redox homeostasis in salt-stressed plants, thus promoting early leaf development by relieving shoot apical meristem arrest. Sunflower stalks from which SBE is prepared can therefore potentially be valorized as a source to produce biostimulants for improving salt stress tolerance in crops.

In recent years, interest in Cannabis sativa L. has been rising, as legislation is moving in the right direction. This plant has been known and used for thousands of years for its many active ingredients that lead to various therapeutic effects (pain management, anti-inflammatory, antioxidant, etc.). In this report, our objective was to optimize a method for the extraction of cannabinoids from a clone of Cannabis sativa L. #138 resulting from an agronomic test (LaFleur, Angers, FR). Thus, we wished to identify compounds with anticancer activity on human pancreatic tumor cell lines. Three static maceration procedures, with different extraction parameters, were compared based on their median inhibitory concentration (IC50) values and cannabinoid extraction yield. As CBD emerged as the molecule responsible for inducing apoptosis in the human pancreatic cancer cell line, a CBD-rich cannabis strain remains attractive for therapeutic applications. Additionally, while gemcitabine, a gold standard drug in the treatment of pancreatic cancer, only triggers cell cycle arrest in G0/G1, CBD also activates the cell signaling cascade to lead to programmed cell death. Our results emphasize the potential of natural products issued from medicinal hemp for pancreatic cancer therapy, as they lead to an accumulation of intracellular superoxide ions, affect the mitochondrial membrane potential, induce G1 cell cycle arrest, and ultimately drive the pancreatic cancer cell to lethal apoptosis.

Growing concern regarding non-biodegradable plastics and the impact of these materials on the environment has promoted interest in biodegradable plastics. The intensification of separate biowastes collection in most European countries has also contributed to the development of biodegradable plastics, and the subject of their end-of-life is becoming a key issue. To date, there has been relatively little research to evaluate the biodegradability of biodegradable plastics by anaerobic digestion (AD) compared to industrial and home composting. However, anaerobic digestion is a particularly promising strategy for treating biodegradable organic wastes in the context of circular waste management. This critical review aims to provide an in-depth update of anaerobic digestion of biodegradable plastics by providing a summary of the literature regarding process performances, parameters affecting biodegradability, the microorganisms involved, and some of the strategies (e.g., pretreatment, additives, and inoculum acclimation) used to enhance the degradation rate of biodegradable plastics. In addition, a critical section is dedicated to suggestions and recommendations for the development of biodegradable plastics sector and their treatment in anaerobic digestion.