Fig 11 - uploaded by Nnamdi Francis Ugwuoke
Content may be subject to copyright.
Download
View publication
shows the micrograph of 1.5wt%Mg

shows the micrograph of 1.5wt%Mg

Source publication
Fig 8: shows the microstructure of the control sample. There are no...
Fig 9: shows the micrograph of 0.5wt%Mg
Fig 11: shows the micrograph of 1.5wt%Mg
Readings of the impact test of the samples
+2 The flexural result of the 1wt% Mg sample
Assessing the Mechanical Properties of an Aluminum- Copper-Magnesium Alloy
Article
Full-text available
  • Aug 2023
This study aims to evaluate the mechanical behavior of Aluminum-Copper-Magnesium Alloy signifying the effect of adding magnesium to an alloy of Al-Cu to determine its potential for engineering applications. The research involved a series of processes, including melting the materials using a crucible furnace, followed by casting, machining, heat tre...
Cite
Download full-text

Similar publications

Diagrammatic representation of WADED process and the as-deposited WADED...
Schematic illustration of sampling position and tensile sample dimensions.
The porosity and statistic results of (a1)–(a3) WADED Al-Mg, (b1)–(b3)...
XRD patterns of WADED Al-Mg, Al-Mg-Sc-Zr and Al-Mg-Sc-Zr-HT components.
+11 OM morphology of (a) WADED Al-Mg, (b) WADED Al-Mg-Sc-Zr and (c) WADED...
Sc/Zr microalloying on strength-corrosion performance synergy of wire-arc directed energy deposited Al-Mg
Article
Full-text available
  • Jun 2024
WADED Al-Mg and Al-Mg-Sc-Zr aluminium alloy thin-wall components were produced. Heat treatment (350°C aging for 4 h) was further conducted. The effects of Sc/Zr addition on porosity, microstructure, mechanical properties and corrosion behaviour were investigated. With Sc/Zr adding, pore area fraction decreased from 0.208 to 0.005% and grain size de...
View