Fig 5 - uploaded by Rahul B. Patil
Content may be subject to copyright.
a) Nitrogen adsorption/desorption isotherms, b) pore size distribution of the MM, MN, and M thin films.
Source publication
The trimanganese tetraoxide (Mn3O4) nanostructured thin films doped with 2 mol% of nickel (Ni) and molybdenum (Mo) ions were deposited by a simple electrophoretic deposition technique. The structural, optical, and morphological studies of these doped thin films were compared with pure Mn3O4 thin films. X-ray diffraction (XRD) confirmed the tetragon...
Contexts in source publication
Context 1
... size in the range of 150-200 nms and the MN thin film has interrelated nanoflake morphology with greater porosity but decreased grain size or average crystallite size of value of 100 nms. Thus, the morphology and porosity alteration in the Mn3O4 thin film due to the doping of Mo and Ni ions causes enhanced supercapacitive performance [24]. Fig. 5 a) shows the nitrogen adsorption/ desorption isotherms of the M, MM, and MN thin films and Fig. 5 b) displays their pore size distribution curves obtained from the desorption isotherms. These nitrogen isotherms are of type IV, confirm the of all thin films and are observed in the range of 0.3 to 1 P/P0 [27]. Table 2 illustrates the BET ...
Context 2
... with greater porosity but decreased grain size or average crystallite size of value of 100 nms. Thus, the morphology and porosity alteration in the Mn3O4 thin film due to the doping of Mo and Ni ions causes enhanced supercapacitive performance [24]. Fig. 5 a) shows the nitrogen adsorption/ desorption isotherms of the M, MM, and MN thin films and Fig. 5 b) displays their pore size distribution curves obtained from the desorption isotherms. These nitrogen isotherms are of type IV, confirm the of all thin films and are observed in the range of 0.3 to 1 P/P0 [27]. Table 2 illustrates the BET specific surface area, pore volume, and pore size of the pure M, MM, and MN thin films. It ...
