Figure - available from: Journal of Nondestructive Evaluation
This content is subject to copyright. Terms and conditions apply.
Source publication
The impedance spectroscopy technique has been used to study the microstructure of the binder resulting from the alkaline activation of SiMn slag. Two alkaline activators were used: waterglass and NaOH. Three different concentrations were analysed for both activators: 3.0, 3.5 and 4.0% Na2O for NaOH; and 4.0, 4.5 and 5.0% Na2O for waterglass with a...
Similar publications
We prepared bulk samples of SrLaLiTe1-xGdxO6; 0 ≤ x ≤ 0.3, using the solid-state method. Measurements carried out on the XRD data recorded at room temperature highlighted changes corresponding to the volume of the unit cell and angle β. Specifically, the undoped composition described a structure of the ordered type containing Li⁺ and Te⁶⁺. Calculat...
Au/AlCu/SiO2/p-Si/Al is a novel assembly synthesized by the technology of liquid phase epitaxy (LPE). Using impedance spectroscopy the electric and dielectric properties of these structures have been characterized as a function of voltage, frequency, and temperature. All real parts of the impedance curve at different temperatures, voltages, and fre...
Impedance spectroscopy (IS) is an effective characterization technique used to probe and distinguish charge dynamics occurring at different timescales in optoelectronic and electric devices. With the rapid rise of research being conducted on perovskite solar cells (PSCs), IS has significantly contributed to the understanding of their device perform...
Citations
This study describes the nondestructive testing and evaluation of different clay–lime composites by real-time impedance spectroscopy (IS) monitoring of lime hydration and cementation mechanisms. The experimental investigations were carried out on two different clays, white clay (with predominantly kaolinite mineralogy) and brown clay (with predominantly montmorillonite mineralogy), to determine the influence of clay mineralogy on the fate of lime stabilization processes in different soils. Additionally, the effects of key influencing parameters such as lime content, curing period, and curing temperature were assessed. The time-dependent electrical impedance behavior of different clay–lime systems was determined in terms of bulk resistance and interfacial capacitance, obtained by equivalent circuit modeling of the impedance spectra. The variations in the electrical impedance properties showed a strong correlation with unconfined compressive strength (UCS) of different clay–lime composites. Further, the microstructural improvement of various clay–lime composites was determined with the aid of scanning electron microscopy, mercury intrusion porosimetry, and thermogravimetric analysis to get an auxiliary interpretation of the electrical impedance spectroscopy (EIS) results. The time-dependent variations of the soil impedance evidently manifested the continuous chemical and morphological evolution of the different clay–lime systems during the curing process at different thermal conditions by the formation and deposition of cementitious calcium-silicate-hydrates (C-S-H) and calcium-aluminate-silicate-hydrates (C-A-S-H) compounds. Overall, the nondestructive impedance spectroscopy technique has been proven effective in describing the microstructural changes and related mechanical improvement of lime-treated soils. Although the use of this technique seems to be inefficient for a field quality control assessment, the analysis of the electrical parameters calculated from the impedance spectra measured gives a comprehensive idea of the evolution in the chemically stabilized soil material.
