FIGURE 14 - uploaded by Erween Abd. Rahim
Content may be subject to copyright.
Download
View publication
Surface Plot Graph for Optimum Condition (Gap) 

Surface Plot Graph for Optimum Condition (Gap) 

Source publication
FIGURE 1. Definition of Wire Lag [6]
TABLE 1 . Investigated parameters
FIGURE 2. Workpiece Dimension
TABLE 2 . Constant parameters
+6 FIGURE 3. ANOVA for MRR 
Wire-cut EDM of SiSiC-preliminary investigation in machining parameter
Conference Paper
Full-text available
  • Apr 2017
Silicon Carbide is a semiconductor material that is becoming popular because of its special characteristic. However, the application of this material is limited due to the difficulty of its machining process. This paper discusses the influence of machining parameters in WEDM of Siliconized Silicon Carbide (SiSiC). Using 2-level full factorial desig...
Cite
Download full-text

Similar publications

Figure 1: AISI D3 Steel Work Piece 
Table 1 :
Figure 2: Copper Electrode 
Figure 4: Machined Work Pieces 
+3 Table 4 : Properties of AL2O3 NANO Particles
Influence of Alumina Nano Powder Mixed Dielectric Fluid In Electric Spark Machining Of Aisi D3 Steel
Article
Full-text available
  • Apr 2018
The aim of today’s manufacturing world to produce high surface quality products. To achieve the desired output by through regulating the input process parameters as per the requirement. For that the current work, an experimental study is made on the effect of the pulse on time (Ton), discharge current, gap voltage and powder concentration of alumin...
View
Fig. 1: Desirability function results. 
Table 3 : MRR, TWR, and Ra
Table 4 : ANOVA table for MRR
Table 5 : ANOVA table for TWR
+1 Table 6 : ANOVA table for Ra
Performance of electrical discharge machining (EDM) with nickel added dielectric fluid
Article
Full-text available
  • Jun 2018
In this study, the effect of nickel powder mixed dielectric fluid on Electrical Discharge Machining (EDM) performance of mild steel has been carried out. Peak current, tool/electrode diameter and concentration of powder are the process parameters. The process performance is measured in terms of material removal rate (MRR), tool wear rate (TWR), and...
View