Figure 3
Standardised regression coefficients (SRCs) resulting from a multivariate regression analysis of greenhouse gas (GHG) emissions of mixed-mode (MM) buildings, plotted as a function of cooling degree-hours (CDH). Only parameters with 2 adj 0.50 R > are shown. Negative values are shown on the y-axis.
Source publication
Effective mitigation of greenhouse gas (GHG) emissions in the buildings sector requires a full understanding of the factors influencing emissions over the life-cycle of buildings, particularly in places where large additions to the building stock are expected. Currently, little is known about what affects the GHG emissions of buildings located in w...
Similar publications
To provide a warm place for the most vulnerable citizens during the 2022/2023 energy crisis, some municipalities have set up public halls as warming shelters. Thus, the present study analyzes the energy performance of a gymnasium in Southeastern Europe that is repurposed to be used as public warming hall. The study conducted 15 EnergyPlus simulatio...
Citations
... From European Standard (EN 15978), this work investigates stage A (product stage plus transport to site) and stage B6 (operational energy use). Modules B1 (use), B2 (maintenance), B3 (repair), B5 (refurbishment) and B7 (operational water use) were excluded because they generally have low environmental impacts (Frischknecht et al. 2019;Huang 2018;Krych et al. 2021). Module A5 (construction and installation) is excluded due to a lack of quality data on the installation and assembly of residential buildings, while module B4 (replacement) is excluded due to a lack of quality data on repair frequency or patterns by households. ...
Nigeria’s residential buildings consume a substantial amount of the country’s energy, so achieving a net-zero building sector with a rapidly growing population is a key challenge. To bridge the gap in research at a national level and support Nigeria’s commitment to an unconditional 20% reduction in emissions by 2030, this study develops bottom-up archetype models of different residential building typologies to estimate the energy and material use of Nigerian residential buildings. This creates an overview of the residential stock and how different archetypes perform. The study calculates a baseline energy and material use of Nigeria’s residential building stock using the BuildME tool and converts these data into CO2 emissions using a life-cycle assessment. Scenarios are modelled for 2020. Nigeria’s residential dwellings use approximately 0.3 kt of material per dwelling over a lifetime of 50 years and 2404 kWh/yr of energy per dwelling. Annualised, dwellings emit 2500 kgCO2-eq per dwelling due to material and energy use. Scenarios proposed for meeting Nigeria’s emissions targets will require improved energy efficiency, decarbonising the building envelope through a shift in construction materials and decarbonising grid electricity. Policy relevance This study provides a comprehensive analysis of the energy and material use of residential buildings in Nigeria, focusing on achieving the country’s commitment to a 20% reduction in emissions by 2030. It employs a bottom-up approach to model energy and material use, revealing the peculiarities of the dwelling stock across Nigeria’s four climatic zones. The study explores the implications of different policy scenarios on sustainable housing. The research suggests that meeting Nigeria’s emissions targets requires improved energy efficiency, a shift in construction materials and decarbonisation of grid electricity. It also highlights the potential benefits of a policy switch to materials such as timber, earthen blocks, adobe bricks and clay, which could significantly reduce construction-related emissions. These changes could improve the quality of life of households in Nigeria, combat climate change on a global scale and bring economic advantages to Nigeria.
... Eco-design measurement • Life Cycle Assessment (LCA): LCA evaluates the environmental impacts of a building or city over its entire life cycle, including construction, operation, and demolition. It quantifies aspects like energy consumption, material use, emissions, and waste generation [132,133] . ...
In an era characterized by unprecedented urbanization and escalating concerns about climate change, the resilience of buildings and cities has emerged as a paramount global imperative. This review article embarks on a comprehensive exploration of the intricate relationship between climate change and the built environment, delving into multi-faceted dimensions that encompass climate change impacts, quantification methodologies, adaptive strategies, disaster management, eco-centric design paradigms, and assessment metrics. As the world grapples with the challenges posed by shifting climate patterns, understanding the intricate interplay between these elements becomes pivotal to fostering sustainable urban development. From the far-reaching implications of climate change on buildings and cities to the intricate tools and strategies that assess, mitigate, and adapt to these shifts, this article offers a comprehensive roadmap for creating resilient urban landscapes that thrive amidst environmental uncertainties. By amalgamating diverse insights and approaches, it envisions a future where eco-design, climate resilience, and pragmatic strategies converge to shape buildings and cities that stand as bastions of sustainability and fortitude.
The hybrid ventilation system has shown considerable potential in managing indoor thermal comfort, preserving indoor air quality, and minimizing energy usage. This is achieved by integrating natural and mechanical ventilation. When natural ventilation is unfeasible, the system smoothly transitions to mechanical ventilation to uphold optimal indoor thermal comfort levels. However, the application of this system in extremely arid regions poses a challenge due to the high energy consumption linked to air conditioning and cooling during the summer. In these areas, air conditioning and cooling alone represent approximately 60% of urban energy consumption. This study aims to assess the viability of hybrid ventilation configurations in an office building situated in the hot, dry climate of Dubai. The primary goal is to decrease energy consumption and carbon dioxide (CO2) emissions without compromising the thermal comfort of the occupants. A dynamic energy simulation was conducted using the EnergyPlus simulation engine. This included necessary data such as location, weather file, building geometry, construction materials, operational details, and internal load. The results were validated against actual consumption data over a year-long period. The findings suggest that the hybrid system could achieve an annual energy reduction of 23%. The system’s efficiency rose to 29% during cooler seasons, while it managed to reduce energy use by only 13% during hot seasons. Moreover, the hybrid system helped reduce carbon emissions by 20%. This study underscores the potential of hybrid ventilation systems in energy conservation and carbon emission reduction, particularly in hot, dry climates.
In Malaysia, building deterioration is always a national concern. Among the major causes is lack of maintenance which is further exacerbated by several factors that affect the building components throughout their life expectancy (LE). Nevertheless, given that the factors were considered dynamic in nature due to the changes in the people, process, environment, and technology surrounding the built environment's realm, a generic difference in terms of its concentration of impacts is expected. Therefore, a study on revisiting the factors of life expectancy (FLE) of buildings is conducted to identify and validate the factors that might be influential. To achieve this goal, this study used a mixed methodology; literature review through multi-layered thematic (MLT) document analysis and questionnaire survey to validate all factors that influence the LE. The findings show that there are differences in terms of FLE concentration (in rankings) towards different types of building materials (wood/timber, steel, and concrete). It is expected that the result will further help other researchers in pursuing LE numbers for building components, especially in the Malaysian context and others that share similar circumstances.
