Table 1 - available via license: Creative Commons Attribution-NonCommercial 4.0 International
Content may be subject to copyright.
Source publication
span>Non-linear loads on power systems cause harmonics and losses in distribution transformers. Results of the measurements on the two distribution transformers showed several phase transformer test-driven development (TDD) values above the standard SPLN D5.004-1: 2012. The values were 5.58% in the phase transformer, T 1 and 5.48% and 6.10% in S an...
Context in source publication
Context 1
... exact value of the reactive power compensation is necessary to search for the magnitude of the power factor improvement. The entire filter design specification phase transformer can be seen in Table 1. The comparison of the results of all the phase transformers can be seen in The results showed that no work amount exceeded the standard set. ...
Similar publications
Buildings are designed to resist earthquake loads. After an earthquake occurs, it is expected that buildings will suffer minimal non-structural and structural damage. In designing earthquake loads on buildings, the regulations used in Indonesia refer to SNI 1726-2012. In 2019, the national standardization body (BSN) issued a new standard in carryin...
