Fig 8 - uploaded by Rüdiger Franke
Content may be subject to copyright.
Similar publications
The best electrodeposition conditions for fabricating artifact–free and ductile bulk nanocrystalline (nc) Ni–Fe alloys were investigated by evaluating the orientation indices of thin–film samples. Bulk nc Ni–Fe alloys electrodeposited under optimum conditions exhibited a high ultimate tensile strength of 1.9 GPa and a high tensile ductility of 9.1–...
Fracture experiments conducted as part of research on stable crack behavior in low alloy steel (EN 34NiCrMo6) are analyzed and presented. CT specimensof low constraint (section slenderness ratio, b0/B∼6), with various crack depth and different loading angles, φ, were investigated. Analysis of the loaddisplacement curves revealed that the initiation...
Eutectic high-entropy alloys (EHEAs) have drawn increasing interest due to their fine castability as well as appealing properties in recent years. In this work, two bulk-casting Co20-x/3Cr20-x/3Ni50-x/3Al10+x (x = 8 and 9) EHEAs with regular L12/B2 lamellar morphologies were successfully fabricated and studied. Both EHEAs show high ultimate strengt...
Tensile data from literature are reanalyzed to determine ductility potential in magnesium alloys, which has yielded a linear relationship between maximum elongation and yield strength. Ductility potential line is significantly higher than those in the literature. Moreover, grain size, chemical composition, temper do not affect the yield strength-ma...
