Figure - uploaded by Nnamdi Francis Ugwuoke
Content may be subject to copyright.
Download
View publication
Readings of the impact test of the samples

Readings of the impact test of the samples

Source publication
Fig 8: shows the microstructure of the control sample. There are no...
Fig 9: shows the micrograph of 0.5wt%Mg
Fig 11: shows the micrograph of 1.5wt%Mg
Readings of the impact test of the samples
+2 The flexural result of the 1wt% Mg sample
Assessing the Mechanical Properties of an Aluminum- Copper-Magnesium Alloy
Article
Full-text available
  • Aug 2023
This study aims to evaluate the mechanical behavior of Aluminum-Copper-Magnesium Alloy signifying the effect of adding magnesium to an alloy of Al-Cu to determine its potential for engineering applications. The research involved a series of processes, including melting the materials using a crucible furnace, followed by casting, machining, heat tre...
Cite
Download full-text

Similar publications

Diagrammatic representation of WADED process and the as-deposited WADED...
Schematic illustration of sampling position and tensile sample dimensions.
The porosity and statistic results of (a1)–(a3) WADED Al-Mg, (b1)–(b3)...
XRD patterns of WADED Al-Mg, Al-Mg-Sc-Zr and Al-Mg-Sc-Zr-HT components.
+11 OM morphology of (a) WADED Al-Mg, (b) WADED Al-Mg-Sc-Zr and (c) WADED...
Sc/Zr microalloying on strength-corrosion performance synergy of wire-arc directed energy deposited Al-Mg
Article
Full-text available
  • Jun 2024
WADED Al-Mg and Al-Mg-Sc-Zr aluminium alloy thin-wall components were produced. Heat treatment (350°C aging for 4 h) was further conducted. The effects of Sc/Zr addition on porosity, microstructure, mechanical properties and corrosion behaviour were investigated. With Sc/Zr adding, pore area fraction decreased from 0.208 to 0.005% and grain size de...
View