Fig 3 - uploaded by Gordon Ononiwu
Content may be subject to copyright.
Power flow in the network branch: a) without power factor correction: b) with the capacitors installed at nodes j, j+1,…,n. [15] The following equations for loss reduction calculation across the network are presented in [15]. 

Power flow in the network branch: a) without power factor correction: b) with the capacitors installed at nodes j, j+1,…,n. [15] The following equations for loss reduction calculation across the network are presented in [15]. 

Source publication
Article
Full-text available
Reactive Power Control, Voltage regulation and stability are very important for the efficient operation of the power system. This paper presents an auto-tuning regulator to enhance the performance of the Static Var Compensator at Aba Control 33/11kV Injection Substation. The controller was designed to adapt to operational dynamics of the substation...

Context in source publication

Context 1
... following equations and models are presented for the purpose of simulation and analysis of the network. The network branch model is presented in Fig.3. The following equations for loss reduction calculation across the network are presented in [15]. ...

Similar publications

Article
Pulse-jet cleaning is often used with cartridge filters. However, pulse-jet cleaning is non-uniform between filter cartridges under the same injection pipe. In this study, a pulse-jet cartridge filter was designed. The static pressures on the inner wall of the filter cartridges, the transient pressures below the nozzles, the pressure drops in the f...