Context in source publication
... have done a performance comparison study between our model and other two models representing state of the art in summarization in Arabic language. The performance comparison is displayed in Fig. 5, including precision, recall and F-measure . Fig. 6 displays the improvement of our model with significance optimization over Model-1 , Model-2  and over our proposed model without significance optimization. Our model with significance optimization outperforms other models with respect to precision, recall and F-measure. ...
This chapter summarizes and concludes the contribution of this thesis in Section 6.1 and Section 6.2, respectively. Section 6.3 provides an overview of future work projects.
The temporal data of the power system are expanding with the growth of the power system and the proliferation of automated equipment. However, data loss may arise during the acquisition, measurement, transmission, and storage of temporal data. To address the insufficiency of temporal data in the power system, this study proposes a sequence-to-sequence (Seq2Seq) architecture to restore power system temporal data. This architecture comprises a radial convolutional neural unit (CNN) network and a gated recurrent unit (GRU) network. Specifically, to account for the periodicity and volatility of temporal data, VMD is employed to decompose the time series data output into components of different frequencies. CNN is utilized to extract the spatial characteristics of temporal data. At the same time, Seq2Seq is employed to reconstruct each component based on introducing a feature timing and multi-model combination triple attention mechanism. The feature attention mechanism calculates the contribution rate of each feature quantity and independently mines the correlation between the time series data output and each feature value. The temporal attention mechanism autonomously extracts historical–critical moment information. A multi-model combination attention mechanism is introduced, and the missing data repair value is obtained after modeling the combination of data on both sides of the missing data. Recovery experiments are conducted based on actual data, and the method’s effectiveness is verified by comparison with other methods.