Figure 3 - uploaded by Mohammad Mamunor Rashid
Content may be subject to copyright.
PETE and HDPE waste plastics mixture to fuel with wax 

PETE and HDPE waste plastics mixture to fuel with wax 

Source publication
Data
Full-text available
High density polyethylene (HDPE) and polyethylene terephthalate (PETE) mixture to fuel production process was performed with Ferric Oxide (Fe 2 O 3) and activated carbon. HDPE waste plastic was use 75 gm, PETE was use 25 gm, activated carbon was use 5 gm as a 5% and Ferric Oxide was use 2 gm as a 1%. PETE and HDPE waste plastics mixture to fuel pro...

Context in source publication

Context 1
... was coming as solid pest wise and it collected from condensation and weight was 9 gm. The PETE waste plastic to fuel production period its try to block the condensation unit and it coming out with liquid fuel which is shown in figure 2 and figure 3 and total experiment run time was 4 hour 35 minute. From liquid fuel to wax part was removing after filtering process and solid wax part keep into separate container. ...

Similar publications

Article
Full-text available
The structural characteristics of polymer track-etched membranes (TM) were obtained by atomic force microscopy (AFM) for a set of samples (polypropylene, polycarbonate, polyethylene terephthalate, with average pore diameters ~183, 375, and 1430 nm, respectively). The analysis of AFM experimental data was performed by using a specially developed tec...
Article
Full-text available
Poly(ethlyene terephthalate) waste from a local market was depolymerized by ethylene glycol (EG) in the presence of Lewis acidic ionic liquids [Bmim]ZnCl3 and the qualitative analysis showed that bis(hydroxyethyl) terephthalate was the main product. Compared with ionic liquid [Bmim]Cl, the Lewis acidic ionic liquids showed highly catalytic activity...
Article
Full-text available
In this paper, a combined three-dimensional (3D) optical-electrical simulation of non-pb and flexible four-terminal (4T) all perovskite tandem solar cell (APTSC) is presented. In this structure, polyethylene terephthalate (PET) is used as substrates, while the top sub cell has a MAGeI3 absorber layer and the bottom sub cell has a MASnI3 absorber la...
Article
Full-text available
We report on the synthesis of Cu(bdc) metal–organic frameworks (MOFs) using discarded polyester fabrics as a raw material and on the evaluation of these MOFs as antibacterial coatings. Discarded PET (polyethylene terephthalate) fabrics, of diverse colors, went through ethanolysis to produce disodium terephthalate, which after further treatment with...