Figure 9 - uploaded by Muhammad Tayyeb Abdulwahab
Content may be subject to copyright.
Source publication
The reliability-based calibration of safety factors for the design of a simply supported steel beam, based on BS5950 (2000) is presented in this research work. The calibration was undertaken using a specialized computer program in Microsoft excel environment developed by the Joint Committee for Structural Safety (JCSS) CODE-CAL 2001. The design var...
Similar publications
The hydrous ethanol combined with the turbocharged engine with exhaust gas recirculation (EGR) has been investigated with a phenomenological simulation model. This paper analyzes the influence of the low pressure and high pressure cooled EGR, the intercooler and the amount of recirculated gases, as they affect the performance parameters in a spark-...
![Fig. 10. Spring component model for EHB [3].](profile/Manuela-Cabrera/publication/351811467/figure/fig3/AS:1026886134161411@1621840141415/Spring-component-model-for-EHB-3_Q320.jpg)
Steel Hollow Sections (SHS) offer many structural, economical and architectural advantages in multi-storey and high-rise construction. However, their use is not suitable for a wide range of applications due to the difficulties of site bolting as there is limited access to the inner part of the steel section for tightening of standard bolts. Blind b...
The methodology of model development closely follows the "Methodology of Scientific Research Programmes" (MSRP) defined by Lakatos. however, an essential modification, addressed in this paper, is required.
When machine learning systems meet real world applications, accuracy is only one of several requirements. In this paper, we assay a complementary perspective originating from the increasing availability of pre-trained and regularly improving state-of-the-art models. While new improved models develop at a fast pace, downstream tasks vary more slowly...
The design of flood control structures requires rainfall intensity estimation for design discharge computation. To make the rainfall intensity values easily available in Warri, Delta state of Nigeria, this research developed rainfall models. Rainfall intensity data were collected and analysed. The statistical method of least squares was used to fit...
