Figure 7 - available via license: Creative Commons Attribution-ShareAlike 4.0 International
Content may be subject to copyright.
Locations where sensors were placed in to calibrate thermal images and measure the surface temperature [15]
Source publication
![Figure 6: Weather station locations [19, 18, 17]](publication/370494894/figure/fig3/AS:11431281155384546@1683170328226/Weather-station-locations-19-18-17_Q320.jpg)
The paper describes a dataset that was collected by infrared thermography, which is a non-contact, non-intrusive technique to collect data and analyze the built environment in various aspects. While most studies focus on the city and building scales, the rooftop observatory provides high temporal and spatial resolution observations with dynamic int...
Context in source publication
Context 1
... thermal images' surface temperature estimates were calibrated in accordance with the information gathered by contact surface sensors, as shown in Figure 7 at three different positions. Between December 2021 and March 2022, a heat flux (HF) sensor and a temperature probe were installed at Position a on the surface of a window in Building B. Both the HF sensor and the temperature probe were connected to a Hioki data logger and measured the surface temperature every 3 seconds. ...
Similar publications
This paper describes a dataset collected by infrared thermography, a non-contact, non-intrusive technique to acquire data and analyze the built environment in various aspects. While most studies focus on the city and building scales, an observatory installed on a rooftop provides high temporal and spatial resolution observations with dynamic intera...
Modern remote temperature sensing in the form of infrared imaging has become a widely used and important technique, with the ability to measure and characterize important but unseen Radiant heat. As more Long-wave Infrared (LWIR) detectors come to market aiming to meet a wide array of needs and goals, there is a need to differentiate and appraise L...
