Fig 2
Krzemionki Opatowskie, Ostrowiec Świętokrzyski district. Location of the research area of the mine No. 5. A, B, C -segments of exploitation field; Z -the farmhouse of J. Pachniak and the later base of the expedition; P -pavilions from 1969; W -location of the trench from 1969-1970; d1 -the approach road to J. Pachniak's farm; d2 -the approach road to the expedition base. Location of the excavation. According to B. Balcer 1996, Fig. 1, revised; Graphic design: B. Sałacińska.
Source publication
Jan Kowalczyk exhibited great interest in the issues related to the prehistoric acquisition of flint raw materials and their working. He was involved in research and conservation issues at the turn of the 1950s and 1960s in the Neolithic and Early Bronze mines of striped flint in Krzemionki Opatowskie, exploited by communities of the Funnel Beaker,...
Context in source publication
Context 1
... accordance with the above-mentioned project, in the years 1969-1970 J. Kowalczyk directed, in cooperation with B. Balcer and Z. Krzak, archaeological excavations in the area of mine No. 5 in Krzemionki Opatowskie (Fig. 2). One of the main research objectives was to determine the state of preservation of the mines in this area of the exploitation field. These works were also aimed to establish an appropriate methodology of exploration, allowing to study the stratigraphy as well as the scatter pattern of waste dumps, shaft fillings and flint workshops ...
Similar publications
The article presents a comparative analysis of water absorption of non-autoclaved foam concretes based on microsilica and autoclaved aerated concretes based on fly ash. It is experimentally established that the water absorption by mass of foam concrete the grade D500 is 19.6 % higher than that of aerated concrete of the same grade. Open porosity, w...
Currently, the growth of production of gypsum materials and products exceeds the economic growth of the world markets. More than 90% of binder manufactured of natural raw materials is produced of low grades, and, for production of high strength gypsum by crushed stone autoclaving, not more than 40% of extracted raw materials are used. This is due t...
En este trabajo se presentan los resultados del análisis de la colección de artefactos líticos del Museo de la Unidad Educativa “6 de Junio ‘B’”, que se encuentra en el cantón Potolo (Chuquisaca-Bolivia). La muestra para este estudio son 668 instrumentos formatizados, de los cuales 94 fueron elaborados mediante la técnica del pulido, 51 mediante re...
An algorithm has been developed to assess the technical condition of stressed-skin constructions which constitute load-bearing structures and casing for conveyors. The description of the methodology is presented in the form of an algorithm. An important feature of the methodology is the measurement of main and intermediate structural nodes and then...
Citations
The subject of this article is the analysis of manufacturing flint in the Corded Ware Culture, using examples of chosen archeological sources from site Wilczyce 10. This site is located on Sandomierz Upland and it was discovered in 1994, during the field survey carried out for the Archeological Picture of Poland project. This analysis included flakes, blades and tools. First two categories of finds come primarily from the production of rectangular- sectioned axes. The tools were most often made of flakes, less frequently made of blades. Date 14C which was obtained from sample of charcoal for object 11 is 3895 ± 30 BP(Poz-91046).
