Figure 8 - available via license: Creative Commons Attribution 4.0 International
Content may be subject to copyright.
Source publication
Hot stamping technology has shown a significant scientific yield in the last decade. The research activity in that field has spread across several disciplines such as materials science, mechanics, process engineering, instrumentation, physics, or part-tool design engineering. Some recent publications have gathered this richness in the format of sci...
Context in source publication
Citations
... In addition to the good formability, very high component strengths greater than 1,500 MPa [3] and a hardness of about 450 HV [4] can be achieved. This process is currently established in almost all body structures of all vehicle manufacturers, with a steadily increasing trend [5]. Examples of components are door beams, bumpers, A-, and B-pillars. ...
Hot stamping is a well-established and frequently used manufacturing process in automotive body construction. The number of components manufactured in this way is continuously increasing. Hot stamping is used to produce components with a completely martensitic structure, resulting in high strength and hardness. These components are mainly used in safety-relevant areas of the passenger cell, such as the A-pillar, B-pillar, tunnel and sill. For hot-stamping processes, it is necessary to austenitize the blanks. Heating the sheet metal up to 930 °C in a furnace is very energy-intensive. In large-scale industrial applications, the sheets are generally heated in gas-fired roller hearth furnaces up to 60 m long. Apart from the poor energy balance and the high CO 2 emissions of such furnaces, they are associated with high investment and maintenance costs, large space requirements and a long heating time. Rapid heating by means of the Joule effect and direct current instead of alternating current offer an energy-efficient and environmentally friendly alternative for sheet metal heating. Therefore, this technology can make a major contribution to environmental protection and resource saving. Within the scope of this work, parts were rapid-heated and subsequently hot-stamped by means of a novel heating system based on direct current with energy savings of up to 80 %. Using electricity guarantees a good CO 2 balance. In addition, resistance heating with a new type of DC-heating system and an adapted process chain is compared with conventional furnace heating. In thermographic images and microstructural examinations of the hot-stamped parts, it can be demonstrated that this direct-current technique is well suited for achieving homogeneous hardness and strength in the whole sheet metal. Thus, this new heating system can enhance the efficiency of the hot-stamping technology.
