Fig 3 - uploaded by Dan-Adrian Corfar
Content may be subject to copyright.
Source publication
Recently, a novel hybrid inter-module connection was proposed to reduce the permanent damage in the volumetric module by employing a rubber bearing. In this study, two cyclic tests were carried out to study the seismic performance of the hybrid inter module connection at joint level, while also determining the effect of the beam-column connection d...
Similar publications
An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identied from cyclic loading tests are included in the model. The sensitivity of the ten parameters in aecting the...
This paper analyses the response of a set of RC frame structures, with different structural parameters, under seismic actions. The purpose is to observe how the structural response varies depending on the structural and seismic action parameters. For this analysis, four structural parameters were selected to be modified and each structure thus obta...
This study investigates the seismic performance of beam-to-column connections in Japanese steel office buildings and evaluates their impact on repair costs as part of practical seismic loss assessment. Repair cost analysis is conducted following FEMA P-58 guidelines, utilizing a probabilistic seismic performance approach. Additionally, this study i...
The period ratio and the drift ratio are commonly used as plane regularity control indices for multi-story buildings. However, they fail to reasonably reflect the regularity of lateral force-resisting component configuration and deformation characteristics in non-rigid plate bent frame structures. This study focuses on the analysis of non-rigid sin...
This article presents a study of the wind-resistance and seismic behavior of steel frame elevator structures with square hollow section (SHS) members. The study was conducted by numerical analysis, it begins by examining the semi-rigid performance of SHS T-joints (beam-column joints) under in-plane bending moment, proposes a semi-rigid connection m...
