Figure 1 - available via license: Creative Commons Attribution-NonCommercial 4.0 International
Content may be subject to copyright.
Download
View publication
Flowchart research

Flowchart research

Source publication
Figure 1. Flowchart research
Table 1 . Specifications of the Single-Tuned Passive Filter Design
Table 2 .
Tables 3 . Current Value and TDD Transformers Before and After the...
Analysis of the Effect of an Installation of a Single Tuned Passive Filter on Harmonics and Distribution Transformers
Article
Full-text available
  • Sep 2018
span>Non-linear loads on power systems cause harmonics and losses in distribution transformers. Results of the measurements on the two distribution transformers showed several phase transformer test-driven development (TDD) values above the standard SPLN D5.004-1: 2012. The values were 5.58% in the phase transformer, T 1 and 5.48% and 6.10% in S an...
Cite
Download full-text

Context in source publication

Context 1
... Z is the impedance of the single-tuned filter (Ω), R is the resistance (Ω), L is the inductance (H), and C is the capacitance (F). The stages in this study are as shown in Figure 1. ...

Similar publications

Site coefficient for short period F a SNI 1726-2012
Site coefficient for 1 second period F v SNI 1726-2012
Site coefficient for 1 second period F v SNI 1726-2019
Comparison of seismic load calculation based on SNI 1726-2012 and SNI 1726-2019 to capacity of elements on low level building
Article
Full-text available
  • Jul 2021
Buildings are designed to resist earthquake loads. After an earthquake occurs, it is expected that buildings will suffer minimal non-structural and structural damage. In designing earthquake loads on buildings, the regulations used in Indonesia refer to SNI 1726-2012. In 2019, the national standardization body (BSN) issued a new standard in carryin...
View