Figure - uploaded by Pedro Dinis Gaspar
Content may be subject to copyright.
![Features of the Green Lite CH6416 package [53].](profile/Pedro-Gaspar-7/publication/372078960/figure/tbl1/AS:11431281172183481@1688465644236/Features-of-the-Green-Lite-CH6416-package-53.png)
Source publication
![Figure 1. Life cycle structure of an apple [3].](profile/Pedro-Gaspar-7/publication/372078960/figure/fig1/AS:11431281172144060@1688465643769/Life-cycle-structure-of-an-apple-3_Q320.jpg)
![Features of the Green Lite CH6416 package [53].](profile/Pedro-Gaspar-7/publication/372078960/figure/tbl1/AS:11431281172183481@1688465644236/Features-of-the-Green-Lite-CH6416-package-53_Q320.jpg)
![Features of IKP1878 PEE [54].](profile/Pedro-Gaspar-7/publication/372078960/figure/tbl2/AS:11431281172173251@1688465644356/Features-of-IKP1878-PEE-54_Q320.jpg)
This study proposes an innovative approach to reduce temperature fluctuations in refrigerated transport during loading and unloading, aiming to minimize food waste and optimize energy consumption in the food supply chain. The solution involves integrating Peltier cells into secondary and tertiary packaging to improve system efficiency and minimize...
Contexts in source publication
Context 1
... the elaboration of the research work, it is necessary to have a secondary packaging used for the transport of food and, considering the sustainability, the IFCO RPC packaging can be used, for example, the Green Lite CH6416 ( Figure 5) with the characteristics described in Table 1. ...Context 2
... the elaboration of the research work, it is necessary to have a secondary packaging used for the transport of food and, considering the sustainability, the IFCO RPC packaging can be used, for example, the Green Lite CH6416 ( Figure 5) with the characteristics described in Table 1. Thus, the tertiary packaging is the component where the secondary packaging will be placed and, again, considering sustainability, pallets from the company INKA can be used, more specifically, compacted plastic pallets that are built using recycled plastic: an example can be IKP1878 PEE ( Figure 6), with the characteristics shown in Table 2 [54]. ...Context 3
... the elaboration of the research work, it is necessary to have a secondary packaging used for the transport of food and, considering the sustainability, the IFCO RPC packaging can be used, for example, the Green Lite CH6416 ( Figure 5) with the characteristics described in Table 1. Thus, the tertiary packaging is the component where the secondary packaging will be placed and, again, considering sustainability, pallets from the company INKA can be used, more specifically, compacted plastic pallets that are built using recycled plastic: an example can be IKP1878 PEE ( Figure 6), with the characteristics shown in Table 2 [54]. ...Context 4
... same test is shown in Figure 20. For a better understanding of the analysis of the results, acronyms were assigned to each measurement as presented in Table 10. Figure 21 shows the working state of the Peltier cells during this test. ...Context 5
... same test is shown in Figure 20. For a better understanding of the analysis of the results, acronyms were assigned to each measurement as presented in Table 10. Figure 21 shows the working state of the Peltier cells during this test. ...Context 6
... same test is shown in Figure 20. For a better understanding of the analysis of the results, acronyms were assigned to each measurement as presented in Table 10. Figure 21 shows the working state of the Peltier cells during this test. ...Context 7
... it is important to note that the batteries are not the ones that would be used in a final prototype and were only used for testing. For a better understanding of the analysis of the results, acronyms were assigned to each measurement as presented in Table 11. Figure 23 shows the working state for each one of these tests for the first 20 min since this process repeats during the entire test period (60 min). ...Context 8
... it is important to note that the batteries are not the ones that would be used in a final prototype and were only used for testing. For a better understanding of the analysis of the results, acronyms were assigned to each measurement as presented in Table 11. Figure 23 shows the working state for each one of these tests for the first 20 min since this process repeats during the entire test period (60 min). ...Context 9
... it is important to note that the batteries are not the ones that would be used in a final prototype and were only used for testing. For a better understanding of the analysis of the results, acronyms were assigned to each measurement as presented in Table 11. Figure 23 shows the working state for each one of these tests for the first 20 min since this process repeats during the entire test period (60 min). ...