Figure 1 - available via license: Creative Commons Attribution 4.0 International
Content may be subject to copyright.
Source publication
In the course of designing and certifying civil aircraft, a significant number of dynamic tests are necessary. If the test specimen is too large in volume or weight, it will place higher demands on the loading capacity of the test equipment. The main focus in the design process of dynamic test specimens is to ensure consistency in the dynamic chara...
Similar publications
The current work investigates the transverse vibration of a piezothermoelastic (PTE) nanobeam in the frame of dual-phase-lag thermoelasticity theory. Closed-form analytical expression for the thermoelastic damping (TED) in terms of quality factor for a homogeneous transversely isotropic PTE beam is derived by using Euler–Bernoulli beam theory and c...
A thorough examination of the use of the differential quadrature method has been presented, including an analysis of the weighting coefficient, several methods for implementing the boundary conditions, and the ultimate advantages it offers compared to other numerical techniques. The authors have detailed the technical techniques involved in this st...
This study investigates changes in the propagation and maintenance of convectively coupled Kelvin waves (KWs) in response to surface warming. We use a set of three aquaplanet simulations made with the Community Atmospheric Model version 6 by varying the sea surface temperature boundary conditions to represent the current climate as well as warmer (...
This research addresses the phenomena of thermoelastic damping (TED) and frequency shift (FS) of a thin flexible piezoelectro-magneto-thermoelastic (PEMT) composite beam. Its motion is constrained by two linear flexible springs attached to both ends. The novelty behind the proposed study is to mimic the uncertainties during the fabrication of the b...
We developed a conformal map technique to analyze the attenuation of edge modes propagating along imperfect boundaries. In systems where the potential energy exhibits conformal invariance, the conformal transformation can straighten the boundary, simplifying the boundary conditions. Using the example of edge modes in a simple field-theoretical mode...
