FIG 7 - uploaded by Jean-Michel Tournier
Content may be subject to copyright.
Download
View publication
Effectiveness Factor. 18

Effectiveness Factor. 18

Source publication
FIG. 1. Unit Cell of Graphite Crystal. 1
FIG. 4. 
FIG. 6. Oxidation of IG-110 Graphite. 25 This model for predicting the...
FIG. 7. Effectiveness Factor. 18
On the Oxidation Kinetics and Erosion of Graphite during a Massive Air or Steam Ingress
Conference Paper
Full-text available
  • Jun 2010
A massive air or steam ingress in High Temperature Reactors (HTRs) nominally operating at 600-950 o C is a design-basis accident requiring the development and validation of graphite oxidation and erosion models to examine the impact on the potential fission products release and the integrity of the graphite core and reflector blocks. Nuclear graphi...
Cite
Download full-text

Similar publications

Air flow in the Küppersbusch Convect-Air Professional CPE 110 combi...
Heat transfer coefficient and temperature distribution in the...
The RSM model produced 3D surface plots with actual factor fan rotation...
Prediction of protein denaturation and weight loss in pork loin (muscle Longissimus dorsi) using computational fluid dynamics
Article
Full-text available
  • Aug 2023
The article proposes using Computational Fluid Dynamics to predict protein denaturation and weight loss in pork loin samples during baking. The optimal conditions of heat treatment were determined to be at 181.55℃, 20% humidity, and a fan speed of 639.18 rpm. Following this process, the denaturation of various pork loin proteins was measured, and t...
View
Figure 1. a) Process of the IHT and b) illustration of the theoretical...
Figure 2. Chemical characteristics of the Inconel 718 [9]. 
Figure 3. Tensile test. Detail of the optical measuring system set up. 
Figure 4. Summary of the tensile test results. 
+3 Figure 5. Comparison between pre-strained and intermediate heat treated...
Influence of heat treatments on springback and formability of Inconel 718 alloy in multi-stage deep drawing processes at room temperature
Conference Paper
Full-text available
  • Jun 2016
Numerical simulation of metal forming and deep drawing operations is progressively been established in the aeronautical sector while it is a common practice in the automotive sector, where this technique is used for the development of robust processes and precise forming tools decreasing the high set-up times. Post-forming springback is one of the...
View
Figure 1.1.: Representative chart of the percentage of titanium alloys...
Figure 2.3.: Schematic representation and description of the density...
Figure 2.36.: Graphs showing the mean values of the fusion zone...
Figure 2.5.: Graph showing an example of power density distribution...
+75 Figure 2.35.: Micrographs showing dierent microstructures obtained in a...
Metallurgical and mechanical modelling of Ti-6Al-4V for welding applications
Thesis
Full-text available
  • Jul 2016
Complex heat treatments and manufacturing processes such as welding involve a wide range of temperatures and temperature rates, affecting the microstructure of the material and its properties. In this work, a diffusion based approach to model growth and shrinkage of precipitates in the alpha + beta field of Ti-6Al-4V alloys is established. Experime...
View
Fig. 1. (a) DSC curve of Ni-Nb-Ti amorphous alloy under 20 K/min...
Fig. 2. The microstructures of Al \ \Cu alloys inoculated by different...
Fig. 3. Mechanism diagram of microstructure evolution of Al \ \Cu...
Fig. 4. The engineering stress-strain curves of the inoculated Al \ \Cu...
+7 Fig. 6. The fracture morphology images of the Al \ \Cu alloys...
Design of a new Al-Cu alloy manipulated by in-situ nanocrystals with superior high temperature tensile properties and its constitutive equation
Article
Full-text available
  • Nov 2019
Al\\Cu alloys inoculated by in-situ nano-sized particles crystallized from Ni-Nb-Ti amorphous alloys were prepared by casting method in this work. Different compositions of Ni-Nb-Ti amorphous alloys significantly enhanced heterogeneous nucleation for α-Al and promoted obvious grain refinement of the Al\\Cu alloys. It was found that 0.05 wt% Ni-Nb-T...
View
SEM images of heat-treated granites with intergranular cracks...
The effect of temperature on the physical and mechanical properties:...
The correlation between the predicted thermal damage (TDin) and (a)...
The correlation between the actual and predicted thermal damage.
+3 The correlation between the actual and predicted TD of the best...
Thermal Damage Characterization and Modeling in Granite Samples Subjected to Heat Treatment by Leveraging Machine Learning and Experimental Data
Article
Full-text available
  • Jun 2025
Featured Application The predictive model developed in this study can be used to assess the thermal damage of granite for general applications such as geothermal energy extraction, deep mining, and nuclear waste disposal. By leveraging machine learning and experimental data, the model enables engineers and researchers to evaluate the effect of high...
View