Table 1 - uploaded by John Straube
Content may be subject to copyright.
Source publication
More rigorous energy codes and requirements for energy-efficient construction are spurring interest in new insulation products , specifically those that provide continuous exterior insulation. New exterior insulation products, especially those that have nontraditional forms, need to be evaluated not only for basic material properties such as R-valu...
Contexts in source publication
Context 1
... some cases, it was necessary to use a range of weights, as it was found that similarly advertised products varied in weight. The weights are shown in Table 1. Deflection testing was completed in the laboratory on a short-term basis and a long-term basis. ...
Context 2
... weight of 210 lb (almost 100 kg) was attached to a single strapping member attached through different exterior insulations (shown in Figure 4) simulating a weight of 20 psf, greater than relatively heavy standard three-coat cement stucco (Table 1). The perception with long-term deflection is that it is only a concern with heavy claddings, which is why a weight of 20 psf was chosen. ...
Similar publications
Mechanical contact problems involving friction are widely encountered in many industrial applications. Despite the recent progress in non-smooth mechanics and tribology, a number of these problems are still open as they cannot be properly simulated with current numerical tools. The cumulative microslip phenomenon at the interface of mechanical asse...
