Publications (142)340.69 Total impact
-
Article: A physical model for cosmological simulations of galaxy formation: multi-epoch validation
[show abstract] [hide abstract]
ABSTRACT: We present a multi-epoch analysis of the galaxy populations formed within the cosmological hydrodynamical simulations presented in Vogelsberger et al. (2013). These simulations explore the performance of a recently implemented feedback model which includes primordial and metal line radiative cooling with self-shielding corrections; stellar evolution with associated mass loss and chemical enrichment; feedback by stellar winds; black hole seeding, growth and merging; and AGN quasar- and radio-mode heating with a phenomenological prescription for AGN electro-magnetic feedback. We illustrate the impact of the model parameter choices on the resulting simulated galaxy population properties at high and intermediate redshifts. We demonstrate that our scheme is capable of producing galaxy populations that broadly reproduce the observed galaxy stellar mass function extending from redshift z=0 to z=3. We also characterise the evolving galactic B-band luminosity function, stellar mass to halo mass ratio, star formation main sequence, Tully-Fisher relation, and gas-phase mass-metallicity relation and confront them against recent observational estimates. This detailed comparison allows us to validate elements of our feedback model, while also identifying areas of tension that will be addressed in future work.05/2013; -
Article: Following the flow: tracer particles in astrophysical fluid simulations
[show abstract] [hide abstract]
ABSTRACT: We present two independent numerical schemes for passive tracer particles in the hydrodynamical moving-mesh code Arepo, and compare their performance for various problems, from simple tests to cosmological simulations. The purpose of tracer particles is to allow the flow to be followed in a Lagrangian way, reliably tracing the evolution of the fluid. Such tracer particles can subsequently measure any local instantaneous fluid property, thereby recording the thermodynamical history of individual fluid parcels. We begin by discussing "velocity field tracers", which are advected according to the local velocity field of the fluid, and which have been commonly used in the literature. We find that such tracers do not in general follow the mass flow correctly, particularly in complex flows, and explain why this is the case. This weakness of the method can result in orders-of-magnitude biases in simulations of driven turbulence and in cosmological simulations of structure formation, rendering the velocity field tracers inappropriate for these flows. We then discuss a novel implementation of "Monte Carlo tracers", which are moved along with fluid cells, and are exchanged probabilistically between them following the mass flux. This method reproduces the mass distribution of the fluid correctly by construction, however it is more diffusive than the fluid itself. Nonetheless, we show that this novel approach is more reliable and demonstrate that it is appropriate for following hydrodynamical flows in mesh-based codes. The Monte Carlo tracers can also naturally be transferred between fluid cells and other types of particles, such as stellar particles, so that the mass flow in cosmological simulations can be followed in its entirety. Finally, we demonstrate a possible use of the tracer particles by studying the thermodynamical history of the halo atmosphere in the Santa Barbara Cluster.05/2013; -
Article: The Mass Profile and Accretion History of Cold Dark Matter Halos
[show abstract] [hide abstract]
ABSTRACT: We use the Millennium Simulation series to study the relation between the accretion history (MAH) and mass profile of cold dark matter halos. We find that the mean density within the scale radius, r_{-2} (where the halo density profile has isothermal slope), is directly proportional to the critical density of the Universe at the time when the main progenitor's virial mass equals the mass enclosed within r_{-2}. Scaled to these characteristic values of mass and density, the mean MAH, expressed in terms of the critical density of the Universe, M(\rho_{crit}(z)), resembles that of the enclosed density profile, M(<\rho >), at z=0. Both follow closely the NFW profile, suggesting that the similarity of halo mass profiles originates from the mass-independence of halo MAHs. Support for this interpretation is provided by outlier halos whose accretion histories deviate from the NFW shape; their mass profiles show correlated deviations from NFW and are better approximated by Einasto profiles. Fitting both M(<\rho >) and M(\rho_{crit}) with either NFW or Einasto profiles yield concentration and shape parameters that are correlated, confirming and extending earlier work linking the concentration of a halo with its accretion history. These correlations also confirm that halo structure is insensitive to initial conditions: only halos whose accretion histories differ greatly from the NFW shape show noticeable deviations from NFW in their mass profiles. As a result, the NFW profile provides acceptable fits to hot dark matter halos, which do not form hierarchically, and for fluctuation power spectra other than CDM. Our findings, however, predict a subtle but systematic dependence of mass profile shape on accretion history which, if confirmed, would provide strong support for the link between accretion history and halo structure we propose here.02/2013; -
Article: Moving mesh cosmology: tracing cosmological gas accretion
[show abstract] [hide abstract]
ABSTRACT: We investigate the nature of gas accretion onto haloes and galaxies at z=2 using cosmological hydrodynamic simulations run with the moving mesh code AREPO. Implementing a Monte Carlo tracer particle scheme to determine the origin and thermodynamic history of accreting gas, we make quantitative comparisons to an otherwise identical simulation run with the smoothed particle hydrodynamics (SPH) code GADGET-3. Contrasting these two numerical approaches, we find significant physical differences in the thermodynamic history of accreted gas in haloes above 10^10.5 solar masses. In agreement with previous work, GADGET simulations show a cold fraction near unity for galaxies forming in massive haloes, implying that only a small percentage of accreted gas heats to an appreciable fraction of the virial temperature during accretion. The same galaxies in AREPO show a much lower cold fraction, <20% in haloes above 10^11 solar masses. This results from a hot gas accretion rate which, at this same halo mass, is an order of magnitude larger than with GADGET, while the cold accretion rate is also lower. These discrepancies increase for more massive systems, and we explain both as due to numerical inaccuracies in the standard formulation of SPH. We also observe that the relatively sharp transition from cold to hot mode dominated accretion, at a halo mass of ~10^11, is a consequence of comparing past gas temperatures to a constant threshold value independent of virial temperature. Examining the spatial distribution of accreting gas, we find that gas filaments in GADGET tend to remain collimated and flow coherently to small radii, or artificially fragment and form a large number of purely numerical "blobs". Similar gas streams in AREPO show increased heating and disruption at 0.25-0.5 virial radii and contribute to the hot gas accretion rate in a manner distinct from classical cooling flows.01/2013; -
Article: Exploring the non-linear density field in the Millennium simulations with tessellations - I. The probability distribution function
[show abstract] [hide abstract]
ABSTRACT: We use the Delaunay Tessellation Field Estimator (DTFE) to study the one-point density distribution functions of the Millennium (MS) and Millennium-II (MS-II) simulations. The DTFE technique is based directly on the particle positions, without requiring any type of smoothing or analysis grid, thereby providing high sensitivity to all non-linear structures resolved by the simulations. In order to identify the detailed origin of the shape of the one-point density probability distribution function (PDF), we decompose the simulation particles according to the mass of their host FoF halos, and examine the contributions of different halo mass ranges to the global density PDF. We model the one-point distribution of the FoF halos in each halo mass bin with a set of Monte Carlo realizations of idealized NFW dark matter halos, finding that this reproduces the measurements from the N-body simulations reasonably well, except for a small excess present in simulation results. This excess increases with increasing halo mass. We show that its origin lies in substructure, which becomes progressively more abundant and better resolved in more massive dark matter halos. We demonstrate that the high density tail of the one-point distribution function in less massive halos is severely affected by the gravitational softening length and the mass resolution. In particular, we find these two parameters to be more important for an accurate measurement of the density PDF than the simulated volume. Combining our results from individual halo mass bins we find that the part of the one-point density PDF originating from collapsed halos can nevertheless be quite well described by a simple superposition of a set of NFW halos with the expected cosmological abundance over the resolved mass range. The transition region to the low-density unbound material is however not well captured by such an analytic halo model.01/2013; -
Article: Simulations of the galaxy population constrained by observations from z=3 to the present day: implications for galactic winds and the fate of their ejecta
[show abstract] [hide abstract]
ABSTRACT: We apply Monte Carlo Markov Chain (MCMC) methods to large-scale simulations of galaxy formation in a LambdaCDM cosmology in order to explore how star formation and feedback are constrained by the observed luminosity and stellar mass functions of galaxies. We build models jointly on the Millennium and Millennium-II simulations, applying fast sampling techniques which allow observed galaxy abundances over the ranges 7<log(M*/Msun)<12 and z=0 to z=3 to be used simultaneously as constraints in the MCMC analysis. When z=0 constraints alone are imposed, we reproduce the results of previous modelling by Guo et al. (2012), but no single set of parameters can reproduce observed galaxy abundances at all redshifts simultaneously, reflecting the fact that low-mass galaxies form too early and thus are overabundant at high redshift in this model. The data require the efficiency with which galactic wind ejecta are reaccreted to vary with redshift and halo mass quite differently than previously assumed, but in a similar way as in some recent hydrodynamic simulations of galaxy formation. We propose a specific model in which reincorporation timescales vary inversely with halo mass and are independent of redshift. This produces an evolving galaxy population which fits observed abundances as a function of stellar mass, B- and K-band luminosity at all redshifts simultaneously. It also produces a significant improvement in two other areas where previous models were deficient. It leads to present day dwarf galaxy populations which are younger, bluer, more strongly star-forming and more weakly clustered on small scales than before, although the passive fraction of faint dwarfs remains too high.12/2012; -
Article: Physical properties of simulated galaxy populations at z=2 -- II. Effects of physics ingredients other than cooling and outflows
[show abstract] [hide abstract]
ABSTRACT: We use hydrodynamical simulations from the OWLS project to investigate the dependence of the physical properties of galaxy populations at redshift 2 on the assumed star formation law, the equation of state imposed on the unresolved interstellar medium, the stellar initial mass function, the reionization history, and the assumed cosmology. This work complements that of Paper I, where we studied the effects of varying models for galactic winds driven by star formation and AGN. The normalisation of the matter power spectrum strongly affects the galaxy mass function, but has a relatively small effect on the physical properties of galaxies residing in haloes of a fixed mass. Reionization suppresses the stellar masses and gas fractions of low-mass galaxies, but by z = 2 the results are insensitive to the timing of reionization. The stellar initial mass function mainly determines the physical properties of galaxies through its effect on the efficiency of the feedback, while changes in the recycled mass and metal fractions play a smaller role. If we use a recipe for star formation that reproduces the observed star formation law independently of the assumed equation of state of the unresolved ISM, then the latter is unimportant. The star formation law, i.e. the gas consumption time scale as a function of surface density, determines the mass of dense, star-forming gas in galaxies, but affects neither the star formation rate nor the stellar mass. This can be understood in terms of self-regulation: the gas fraction adjusts until the outflow rate balances the inflow rate.11/2012; -
Article: Physical properties of simulated galaxy populations at z=2 -- I. Effect of metal-line cooling and feedback from star formation and AGN
[show abstract] [hide abstract]
ABSTRACT: We use hydrodynamical simulations from the OWLS project to investigate the dependence of the physical properties of galaxy populations at redshift 2 on metal-line cooling and feedback from star formation and active galactic nuclei (AGN). We find that if the sub-grid feedback from star formation is implemented kinetically, the feedback is only efficient if the initial wind velocity exceeds a critical value. This critical velocity increases with galaxy mass and also if metal-line cooling is included. This suggests that radiative losses quench the winds if their initial velocity is too low. If the feedback is efficient, then the star formation rate is inversely proportional to the amount of energy injected per unit stellar mass formed (which is proportional to the initial mass loading for a fixed wind velocity). This can be understood if the star formation is self-regulating, i.e. if the star formation rate (and thus the gas fraction) increase until the outflow rate balances the inflow rate. Feedback from AGN is efficient at high masses, while increasing the initial wind velocity with gas pressure or halo mass allows one to generate galaxy-wide outflows at all masses. Matching the observed galaxy mass function requires efficient feedback. In particular, the predicted faint-end slope is too steep unless we resort to highly mass loaded winds for low-mass objects. Such efficient feedback from low-mass galaxies (M_* << 10^10 Msun) also reduces the discrepancy with the observed specific star formation rates, which are higher than predicted unless the feedback transitions from highly efficient to inefficient just below the observed stellar mass range.11/2012; -
Article: Moving mesh cosmology: properties of neutral hydrogen in absorption
[show abstract] [hide abstract]
ABSTRACT: We examine the distribution of neutral hydrogen in cosmological simulations carried out with the new moving-mesh code AREPO and compare it with the corresponding GADGET simulations based on the smoothed particle hydrodynamics (SPH) technique. The two codes use identical gravity solvers and baryonic physics implementations, but very different methods for solving the Euler equations, allowing us to assess how numerical effects associated with the hydro-solver impact the results of simulations. Here we focus on an analysis of the neutral gas, as detected in quasar absorption lines. We find that the high column density regime probed by Damped Lyman-alpha (DLA) and Lyman Limit Systems (LLS) exhibits significant differences between the codes. GADGET produces spurious artefacts in large halos in the form of gaseous clumps, boosting the LLS cross-section. Furthermore, it forms halos with denser central baryonic cores than AREPO, which leads to a substantially greater DLA cross-section from smaller halos. AREPO thus produces a significantly lower cumulative abundance of DLAs, which is intriguingly in much closer agreement with observations. The column density function, however, is not altered enough to significantly reduce the discrepancy with the observed value. For the low column density gas probed by the Lyman-alpha forest, the codes differ only at the level of a few percent, suggesting that this regime is quite well described by both methods, a fact that is reassuring for the many Lyman-alpha studies carried out with SPH thus far. While the residual differences are smaller than the errors on current Lyman-alpha forest data, we note that this will likely change for future precision experiments.09/2012; -
Article: The satellites of the Milky Way - Insights from semi-analytic modelling in a LambdaCDM cosmology
[show abstract] [hide abstract]
ABSTRACT: We combine the six high-resolution Aquarius dark matter simulations with a semi-analytic galaxy formation model to investigate the properties of the satellites of Milky Way-like galaxies. We find good correspondence with the observed luminosity function, luminosity-metallicity relation and radial distribution of the Milky Way satellites. The star formation histories of the dwarf galaxies in our model vary widely, in accordance with what is seen observationally. Ram-pressure stripping of hot gas from the satellites leaves a clear imprint of the environment on the characteristics of a dwarf galaxy. We find that the fraction of satellites dominated by old populations of stars matches observations well. However, the internal metallicity distributions of the model satellites appear to be narrower than observed. This may indicate limitations in our treatment of chemical enrichment, which is based on the instantaneous recycling approximation. Our model works best if the dark matter halo of the Milky Way has a mass of ~8 x 10^11 Msun, in agreement with the lower estimates from observations. The galaxy that resembles the Milky Way the most also has the best matching satellite luminosity function, although it does not contain an object as bright as the SMC or LMC. Compared to other semi-analytic models and abundance matching relations we find that central galaxies reside in less massive haloes, but the halo mass-stellar mass relation in our model is consistent both with hydrodynamical simulations and with recent observations.05/2012; -
Article: Shaping the galaxy stellar mass function with supernova- and AGN-driven winds
[show abstract] [hide abstract]
ABSTRACT: Cosmological hydrodynamical simulations of galaxy formation in representative regions of the Universe typically need to resort to subresolution models to follow some of the feedback processes crucial for galaxy formation. Here, we show that an energy-driven outflow model in which the wind velocity decreases and the wind mass loading increases in low-mass galaxies, as suggested by observations, can produce a good match to the low-mass end of the observed galaxy stellar mass function. The high-mass end can be recovered simultaneously if feedback from active galactic nuclei (AGN) and a correction for diffuse stellar light plausibly missed in observations are included. At the same time, our model is in good agreement with the stellar mass functions at redshifts z=1 and z=2, and with the observed redshift evolution of the cosmic star formation rate density. In addition, it accurately reproduces the observed gas to stellar mass ratios and specific star formation rates of galaxies as a function of their stellar mass. This agreement with a diverse set of data marks significant progress in hydrodynamically modelling the formation of a representative galaxy population. It also suggests that the mass flux in real galactic winds should strongly increase towards low-mass galaxies. Without this assumption, an overproduction of galaxies at the faint-end of the galaxy luminosity function seems inevitable in our models.05/2012; -
Article: SubHaloes going Notts: The SubHalo-Finder Comparison Project
[show abstract] [hide abstract]
ABSTRACT: We present a detailed comparison of the substructure properties of a single Milky Way sized dark matter halo from the Aquarius suite at five different resolutions, as identified by a variety of different (sub-)halo finders for simulations of cosmic structure formation. These finders span a wide range of techniques and methodologies to extract and quantify substructures within a larger non-homogeneous background density (e.g. a host halo). This includes real-space, phase-space, velocity-space and time- space based finders, as well as finders employing a Voronoi tessellation, friends-of-friends techniques, or refined meshes as the starting point for locating substructure.A common post-processing pipeline was used to uniformly analyse the particle lists provided by each finder. We extract quantitative and comparable measures for the subhaloes, primarily focusing on mass and the peak of the rotation curve for this particular study. We find that all of the finders agree extremely well on the presence and location of substructure and even for properties relating to the inner part part of the subhalo (e.g. the maximum value of the rotation curve). For properties that rely on particles near the outer edge of the subhalo the agreement is at around the 20 per cent level. We find that basic properties (mass, maximum circular velocity) of a subhalo can be reliably recovered if the subhalo contains more than 100 particles although its presence can be reliably inferred for a lower particle number limit of 20. We finally note that the logarithmic slope of the subhalo cumulative number count is remarkably consistent and <1 for all the finders that reached high resolution. If correct, this would indicate that the larger and more massive, respectively, substructures are the most dynamically interesting and that higher levels of the (sub-)subhalo hierarchy become progressively less important.03/2012; -
Article: Multi-Dimensional, Compressible Viscous Flow on a Moving Voronoi Mesh
[show abstract] [hide abstract]
ABSTRACT: Numerous formulations of finite volume schemes for the Euler and Navier-Stokes equations exist, but in the majority of cases they have been developed for structured and stationary meshes. In many applications, more flexible mesh geometries that can dynamically adjust to the problem at hand and move with the flow in a (quasi) Lagrangian fashion would, however, be highly desirable, as this can allow a significant reduction of advection errors and an accurate realization of curved and moving boundary conditions. Here we describe a novel formulation of viscous continuum hydrodynamics that solves the equations of motion on a Voronoi mesh created by a set of mesh-generating points. The points can move in an arbitrary manner, but the most natural motion is that given by the fluid velocity itself, such that the mesh dynamically adjusts to the flow. Owing to the mathematical properties of the Voronoi tessellation, pathological mesh-twisting effects are avoided. Our implementation considers the full Navier-Stokes equations and has been realized in the AREPO code both in 2D and 3D. We propose a new approach to compute accurate viscous fluxes for a dynamic Voronoi mesh, and use this to formulate a finite volume solver of the Navier-Stokes equations. Through a number of test problems, including circular Couette flow and flow past a cylindrical obstacle, we show that our new scheme combines good accuracy with geometric flexibility, and hence promises to be competitive with other highly refined Eulerian methods. This will in particular allow astrophysical applications of the AREPO code where physical viscosity is important, such as in the hot plasma in galaxy clusters, or for viscous accretion disk models.03/2012; -
Article: Moving Mesh Cosmology: Properties of Gas Disks
[show abstract] [hide abstract]
ABSTRACT: We compare the structural properties of galaxies formed in cosmological simulations using the smoothed particle hydrodynamics (SPH) code GADGET with those using the moving-mesh code AREPO. Both codes employ identical gravity solvers and the same sub-resolution physics but use very different methods to track the hydrodynamic evolution of gas. This permits us to isolate the effects of the hydro solver on the formation and evolution of galactic gas disks in GADGET and AREPO haloes with comparable numerical resolution. In a matching sample of GADGET and AREPO haloes we fit simulated gas disks with exponential profiles. We find that the cold gas disks formed using the moving mesh approach have systematically larger disk scale lengths and higher specific angular momenta than their GADGET counterparts across a wide range in halo masses. For low mass galaxies differences between the properties of the simulated galaxy disks are caused by an insufficient number of resolution elements which lead to the artificial angular momentum transfer in our SPH calculation. We however find that galactic disks formed in massive halos, resolved with 10^6 particles/cells, are still systematically smaller in the GADGET run by a factor of ~2. The reasons for this are: 1) The excessive heating of haloes close to the cooling radius due to spurious dissipation of the subsonic turbulence in GADGET; and 2) The efficient delivery of low angular momentum gaseous blobs to the bottom of the potential well. While this large population of gaseous blobs in GADGET originates from the filaments which are pressure confined and fragment due to the SPH surface tension while infalling into hot halo atmospheres, it is essentially absent in the moving mesh calculation, clearly indicating numerical rather than physical origin of the blob material.10/2011; -
Article: Moving mesh cosmology: characteristics of galaxies and haloes
[show abstract] [hide abstract]
ABSTRACT: We discuss cosmological hydrodynamic simulations of galaxy formation performed with the new moving-mesh code AREPO, which promises higher accuracy compared with the traditional SPH technique that has been widely employed for this problem. We use an identical set of physics in corresponding simulations carried out with the well-tested SPH code GADGET, adopting also the same high-resolution gravity solver. We are thus able to compare both simulation sets on an object-by-object basis, allowing us to cleanly isolate the impact of different hydrodynamical methods on galaxy and halo properties. In accompanying papers, we focus on an analysis of the global baryonic statistics predicted by the simulation codes, (Vogelsberger et al. 2011) and complementary idealized simulations that highlight the differences between the hydrodynamical schemes (Sijacki et al. 2011). Here we investigate their influence on the baryonic properties of simulated galaxies and their surrounding haloes. We find that AREPO leads to significantly higher star formation rates for galaxies in massive haloes and to more extended gaseous disks in galaxies, which also feature a thinner and smoother morphology than their GADGET counterparts. Consequently, galaxies formed in AREPO have larger sizes and higher specific angular momentum than their SPH correspondents. The more efficient cooling flows in AREPO yield higher densities and lower entropies in halo centers (and the opposite trend in halo outskirts) leading to higher star formation rates of massive galaxies. While both codes agree to acceptable accuracy on a number of baryonic properties of cosmic structures, our results clearly demonstrate that galaxy formation simulations greatly benefit from the use of more accurate hydrodynamical techniques such as AREPO.09/2011; -
Article: Dark matter halo occupation: environment and clustering
[show abstract] [hide abstract]
ABSTRACT: We use a large dark matter simulation of a LambdaCDM model to investigate the clustering and environmental dependence of the number of substructures in a halo. Focusing on redshift z=1, we find that the halo occupation distribution is sensitive at the tens of percent level to the surrounding density and to a lesser extent to asymmetry of the surrounding density distribution. We compute the autocorrelation function of halos as a function of occupation, building on the finding of Wechsler et al. (2006) and Gao and White (2007) that halos (at fixed mass) with more substructure are more clustered. We compute the relative bias as a function of occupation number at fixed mass, finding a strong relationship. At fixed mass, halos in the top 5% of occupation can have an autocorrelation function ~ 1.5-2 times higher than the mean. We also compute the bias as a function of halo mass, for fixed halo occupation. We find that for group and cluster sized halos, when the number of subhalos is held fixed, there is a strong anticorrelation between bias and halo mass. Such a relationship represents an additional challenge to the halo model.09/2011; -
Article: Moving mesh cosmology: the hydrodynamics of galaxy formation
[show abstract] [hide abstract]
ABSTRACT: We present a detailed comparison between the well-known SPH code GADGET and the new moving-mesh code AREPO on a number of hydrodynamical test problems. Through a variety of numerical experiments we establish a clear link between test problems and systematic numerical effects seen in cosmological simulations of galaxy formation. Our tests demonstrate deficiencies of the SPH method in several sectors. These accuracy problems not only manifest themselves in idealized hydrodynamical tests, but also propagate to more realistic simulation setups of galaxy formation, ultimately affecting gas properties in the full cosmological framework, as highlighted in papers by Vogelsberger et al. (2011) and Keres et al. (2011). We find that an inadequate treatment of fluid instabilities in GADGET suppresses entropy generation by mixing, underestimates vorticity generation in curved shocks and prevents efficient gas stripping from infalling substructures. In idealized tests of inside-out disk formation, the convergence rate of gas disk sizes is much slower in GADGET due to spurious angular momentum transport. In simulations where we follow the interaction between a forming central disk and orbiting substructures in a halo, the final disk morphology is strikingly different. In AREPO, gas from infalling substructures is readily depleted and incorporated into the host halo atmosphere, facilitating the formation of an extended central disk. Conversely, gaseous sub-clumps are more coherent in GADGET simulations, morphologically transforming the disk as they impact it. The numerical artefacts of the SPH solver are particularly severe for poorly resolved flows, and thus inevitably affect cosmological simulations due to their hierarchical nature. Our numerical experiments clearly demonstrate that AREPO delivers a physically more reliable solution.09/2011; -
Article: Moving mesh cosmology: numerical techniques and global statistics
[show abstract] [hide abstract]
ABSTRACT: We present the first hydrodynamical simulations of structure formation using the new moving mesh code AREPO and compare the results with GADGET simulations based on a traditional smoothed particle hydrodynamics (SPH) technique. The two codes share the same Tree-PM gravity solver and include identical sub-resolution physics, but employ different methods to solve the equations of hydrodynamics. This allows us to assess the impact of hydro-solver uncertainties on the results of cosmological studies of galaxy formation. We focus on predictions for global baryon statistics, such as the cosmic star formation rate density, after we introduce our simulation suite and numerical methods. Properties of individual galaxies and haloes are examined by Keres et al. (2011), while a third paper by Sijacki et al. (2011) uses idealised simulations to analyse the differences between the hydrodynamical schemes. We find that the global baryon statistics differ significantly between the two simulation approaches. AREPO shows higher star formation rates at late times, lower mean temperatures, and different gas mass fractions in characteristic phases of the intergalactic medium, in particular a reduced amount of hot gas. Although both codes use the same implementation of cooling, more gas cools out of haloes in AREPO compared with GADGET towards low redshifts. We show that this is caused by a higher heating rate with SPH in the outer parts of haloes, owing to viscous dissipation of SPH's inherent sonic velocity noise and SPH's efficient damping of subsonic turbulence injected in the halo infall region, and because of a higher efficiency of gas stripping in AREPO. As a result of such differences, AREPO leads also to more disk-like morphologies compared to GADGET. Our results indicate that inaccuracies in hydrodynamic solvers can lead to comparatively large systematic differences.09/2011; -
Article: Detecting neutral hydrogen in emission at redshift z ≃ 1
[show abstract] [hide abstract]
ABSTRACT: We use a large N-body simulation to examine the detectability of H i in emission at redshift z≃ 1, and the constraints imposed by current observations on the neutral hydrogen mass function of galaxies at this epoch. We consider three different models for populating dark matter haloes with H i, designed to encompass uncertainties at this redshift. These models are consistent with recent observations of the detection of H i in emission at z≃ 0.8. Whilst detection of 21-cm emission from individual haloes requires extremely long integrations with existing radio interferometers, such as the Giant Meter Radio Telescope (GMRT), we show that the stacked 21-cm signal from a large number of haloes can be easily detected. However, the stacking procedure requires accurate redshifts of galaxies. We show that radio observations of the field of the Deep Extragalactic Evolutionary Probe 2 (DEEP2) spectroscopic galaxy redshift survey should allow detection of the H i mass function at the 5–12σ level in the mass range 1011.4 h−1 M⊙≤Mhalo≤ 1012.5 h−1 M⊙, with a moderate amount of observation time. Assuming a larger noise level that corresponds to an upper bound for the expected noise for the GMRT, the detection significance for the H i mass function is still at the 1.7–3σ level. We find that optically undetected satellite galaxies enhance the H i emission profile of the parent halo, leading to broader wings as well as a higher peak signal in the stacked profile of a large number of haloes. We show that it is in principle possible to discern the contribution of undetected satellites to the total H i signal, even though cosmic variance limitation make this challenging for some of our models.Monthly Notices of the Royal Astronomical Society 08/2011; 415(3):2580 - 2593. · 4.90 Impact Factor -
Article: Early Black Holes in Cosmological Simulations: Luminosity Functions and Clustering Behaviour
[show abstract] [hide abstract]
ABSTRACT: We examine predictions for the quasar luminosity functions (QLF) and quasar clustering at high redshift (z > 4.75) using MassiveBlack, our new hydrodynamic cosmological simulation which includes a self-consistent model for black hole growth and feedback. We show that the model reproduces the Sloan QLF within observational constraints at z >= 5. We find that the high-z QLF is consistent with a redshift-independent occupation distribution of BHs among dark matter halos (which we provide) such that the evolution of the QLF follows that of the halo mass function. The sole exception is the bright-end at z=6 and 7, where BHs in high-mass halos tend to be unusually bright due to extended periods of Eddington growth caused by high density cold flows into the halo center. We further use these luminosity functions to make predictions for the number density of quasars in upcoming surveys, predicting there should be ~119+-28 (~87+-28) quasars detectable in the F125W band of the WIDE (DEEP) fields of the Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey (CANDELS) from z=5-6, ~19+-7 (~18+-9) from z=6-7, and ~1.7+-1.5 (~1.5+-1.5) from z=7-8. We also investigate quasar clustering, finding that the correlation length is fully consistent with current constraints for Sloan quasars (r_0~17 h^{-1} Mpc at z=4 for quasars above m_i = 20.2), and grows slowly with redshift up to z=6 (r_0~22 h^{-1} Mpc). Finally, we note that the quasar clustering strength depends weakly on luminosity for low L_BH, but gets stronger at higher L_BH as the BHs are found in higher mass halos.07/2011;
Top co-authors
Top Journals
Institutions
-
2011
-
Heidelberg University
Tiffin, OH, USA
-
-
2010–2011
-
Universität Heidelberg
Heidelberg, Baden-Wuerttemberg, Germany -
Heidelberger Institut für Theoretische Studien
Heidelberg, Baden-Wuerttemberg, Germany -
University of Massachusetts Amherst
- Department of Astronomy
Amherst Center, MA, USA
-
-
2002–2011
-
Max-Planck-Institut für Astrophysik
Garching bei München, Bavaria, Germany
-
-
2002–2010
-
Harvard-Smithsonian Center for Astrophysics
Cambridge, MA, USA
-
-
2007
-
University of Victoria
- Department of Physics and Astronomy
Victoria, British Columbia, Canada
-
-
2004
-
National Astronomical Observatory of Japan
Tokyo, Tokyo-to, Japan
-
