Publications (12)61.88 Total impact
-
Article: Biodegradable and photocrosslinkable polyphosphoester hydrogel.
[show abstract] [hide abstract]
ABSTRACT: A new biodegradable, photocrosslinkable and multifunctional macromer, poly(6-aminohexyl propylene phosphate) (PPE-HA)-ACRL, was synthesized by conjugation of acrylate groups to the side chains of PPE-HA. By controlling the synthetic conditions, different weight fractions of acrylate in the macromers were achieved as confirmed by 1H NMR. The hydrogels obtained from PPE-HA-ACRL through photocrosslinking were dominantly elastic. With increasing acrylate contents in the macromers, the hydrogels exhibited a lower swelling ratio and higher mechanical strength. The hydrogels with different crosslinking densities lost between 4.3% and 37.4% of their mass in 84 days when incubated in phosphate-buffered saline at 37 degrees C. No significant cytotoxicity of the macromers against bone marrow-derived mesenchymal stem cells from goat (GMSC) was observed at a concentration up to 10mg/ml. Finally, GMSCs encapsulated in the photopolymerized gel maintained their viability when cultured in osteogenic medium for three weeks. Clear mineralization in the hydrogel scaffold was revealed by Von Kossa staining. This study suggests the potential of these biodegradable and photocrosslinkable as injectable tissue engineering scaffolds.Biomaterials 04/2006; 27(7):1027-34. · 7.40 Impact Factor -
Article: Poly(phosphoester) ionomers as tissue-engineering scaffolds.
[show abstract] [hide abstract]
ABSTRACT: Regenerative medicine requires scaffolds of divergent physicochemical properties for different tissue-engineering applications. To this end, a series of biodegradable poly(phosphoester) ionomers of the general composition [p(BHET-EOP-HOP/TC)] was synthesized, with BHET(bis-hydroxyl ethylene phosphate):EOP(ethylene phosphate):HOP(free phosphate) ratios of 60:20:20, 70:10:20, and 75:5:20, respectively. The 60/20/20 ionomer possessed the best tensile properties, exhibiting an average tensile modulus of 68 MPa and strain at break of 31%. Calcium treatment of the ionomer films led to significantly higher hardness and elastic moduli as measured by indentation. Calcium binding was evident from the increase in glass transition and melting temperatures, and a shift in the P-->O absorption in the FTIR spectrum. Stable N-hydroxysuccinimide ester (NHS) of the ionomers could be synthesized to facilitate derivatization, as demonstrated by conjugation of GRGDS in this study. The polymers conjugated with NHS were hydrolyzed in a biphasic mode, with a fast initial phase occurring in the first few hours, followed by a slower phase in the next few days. These ionomers represent a novel class of biomaterials with readily controllable physical and chemical attributes for tissue engineering.Journal of Biomedical Materials Research Part B Applied Biomaterials 07/2004; 70(1):91-102. · 2.15 Impact Factor -
Article: Evaluation of collagen and methylated collagen as gene carriers.
[show abstract] [hide abstract]
ABSTRACT: This study explores the potential of DNA complexes prepared with methylated collagen (MC) and unmodified native collagen (NC) to deliver genes into cells. The physicochemical properties and transfection abilities of these two types of complexes are studied in parallel. MC was prepared by methylation of the carboxyl groups of collagen, rendering the collagen net positively charged at neutral pH. NC/DNA complexes were prepared at pH approximately 3, but aggregated rapidly at neutral pH. These complexes did not confer significant protection to DNA due to its poor stability in serum. MC carried a positive charge at neutral pH and formed complexes with DNA in PBS; therefore MC improved DNA binding ability and the stability of the complexes at physiological conditions. MC/DNA complexes were smaller and more stable than NC/DNA complexes in PBS, and sustained released of DNA from MC/DNA complexes was observed for up to 3 weeks in PBS at 37 degrees C. In contrast, NC/DNA complexes released almost all the DNA within 6h under the same condition. In vitro gene transfection experiments revealed that MC mediated a higher gene expression than NC, although the level of gene expression was still much lower than that achieved with polyethyleneimine/DNA complexes. In contrast to in vitro results, NC/DNA complexes yielded a 3.8-fold higher gene expression than naked DNA and MC/DNA complexes (P < 0.05) at week 2 following intramuscular injection at a DNA dose of 3 microg per muscle and a weight ratio of 1. Higher weight ratios resulted in significant decrease of transfection efficiency, particularly for MC/DNA complexes. The results suggested that gene delivery via the intramuscular route followed a different mechanism that demands a different set of physiochemical properties of the carrier from other parental routes. The potential of these collagen-based gene carriers for other administration routes remain to be further investigated.International Journal of Pharmaceutics 07/2004; 279(1-2):115-26. · 3.35 Impact Factor -
Article: Photocrosslinkable polysaccharides based on chondroitin sulfate.
[show abstract] [hide abstract]
ABSTRACT: Photopolymerizing hydrogels have demonstrated potential for use as a scaffold in numerous tissue-engineering applications. The majority of photopolymerizing hydrogels are made from purely synthetic polymers. The purpose of this study was to synthesize and characterize photopolymerizing hydrogels derived from the biopolymer chondroitin sulfate in order to enhance the bioactivity of the scaffold and potentially improve tissue regeneration. Methacrylate groups were added to chondroitin sulfate, a major component of cartilage, using glycidyl methacrylate. The gels exhibited viscoelastic behavior typical of hydrogels. Cogels based on chondroitin sulfate and poly(ethylene glycol) demonstrated increasing pore size with increasing concentration of chondroitin sulfate as determined by water content, mechanical strength, and morphology using scanning electron microscopy. The chondroitin sulfate hydrogels degraded specifically in the presence of the enzyme chondroitinase. Chondrocytes remained viable after photoencapsulation and incubation in the biogels, suggesting their possible use for cartilage tissue engineering.Journal of Biomedical Materials Research Part A 02/2004; 68(1):28-33. · 2.63 Impact Factor -
Article: Galactosylated PVDF membrane promotes hepatocyte attachment and functional maintenance.
[show abstract] [hide abstract]
ABSTRACT: One of the major challenges in BLAD design is to develop functional substrates suitable for hepatocyte attachment and functional maintenance. In the present study, we designed a poly(vinylidene difluoride) (PVDF) surface coated with galactose-tethered Pluronic polymer. The galactose-derived Pluronic F68 (F68-Gal) was adsorbed on PVDF membrane through hydrophobic-hydrophobic interaction between PVDF and the polypropylene oxide segment in Pluronic. The galactose density on the modified PVDF surface increased with the concentration of the F68-Gal solution, reaching 15.4 nmol galactosyl groups per cm2 when a 1 mg/ml of F68-Gal solution was used. The adsorbed F68-Gal remained relatively stable in culture medium. Rat hepatocytes attachment efficiency on F68-Gal modified PVDF membrane was similar to that on collagen-coated surface. The attached hepatocytes on PVDF/F68-Gal membrane self-assembled into multi-cellular spheroids after 1 day of culture. These attached hepatocytes in spheroids exhibited higher cell functions such as albumin synthesis and P450 1A1 detoxification function compared to unmodified PVDF membrane and collagen-coated surface. These results suggest the potential of this galactose-immobilized PVDF membrane as a suitable substrate for hepatocyte culture.Biomaterials 01/2004; 24(27):4893-903. · 7.40 Impact Factor -
Article: Effect of side-chain structures on gene transfer efficiency of biodegradable cationic polyphosphoesters.
[show abstract] [hide abstract]
ABSTRACT: Cationic polyphosphoesters (PPEs) with different side-chain charge groups were designed and synthesized as biodegradable gene carriers. Poly(N-methyl-2-aminoethyl propylene phosphate) (PPE-MEA), with a secondary amino group (-CH(2)CH(2)NHCH3) side chain released DNA in several hours at N/P (amino group of polymer to phosphate group of DNA) ratios from 0.5 to 5; whereas PPE-HA, bearing -CH(2)(CH2)(4)CH(2)NH(2) groups in the side chain, did not release DNA at the same ratio range for 30 days. Hydrolytic degradation and DNA binding results suggested that side chain cleavage, besides the polymer degradation, was the predominant factor affected the DNA release and transfection efficiencies. The side chain of PPE-MEA was cleaved faster than that of PPE-HA, resulting poor cellular uptake and no transgene expression for PPE-MEA/DNA complexes in COS-7 cells at charge ratios from 4 to 12. In contrast, PPE-HA/DNA complexes were stable enough to be internalized by cells and effected gene transfection (3400 folds higher than background at a charge ratio of 12). Interestingly, gene expression levels mediated by PPE-MEA and PPE-HA in mouse muscle following intramuscular injection of complexes showed a reversed order: PPE-MEA/DNA complexes mediated a 1.5-2-fold higher luciferase expression in mouse muscle as compared with naked DNA injection, while PPE-HA/DNA complexes induced delayed and lowered luciferase expression than naked DNA. These results suggested that the side chain structure is a crucial factor determining the mechanism and kinetics of hydrolytic degradation of PPE carriers, which in turn influenced the kinetics of DNA release from PPE/DNA complexes and their transfection abilities in vitro and in vivo.International Journal of Pharmaceutics 11/2003; 265(1-2):75-84. · 3.35 Impact Factor -
Article: Polyphosphoesters in drug and gene delivery.
[show abstract] [hide abstract]
ABSTRACT: Polymers with repeating phosphoester bonds in the backbone are structurally versatile, and biodegradable through hydrolysis, and possibly enzymatic digestion at the phosphoester linkages under physiological conditions. These biodegradable polyphosphoesters are appealing for biological and pharmaceutical applications because of their potential biocompatibility and similarity to bio-macromolecules such as nucleic acids. In the first part of this review, we will focus on one particular structure synthesized by extending oligomeric lactide prepolymers with ethylphosphate groups. This amorphous to semi-crystalline polymer is promising in delivering anti-cancer therapeutics in the form of microspheres. In the second half, we will discuss the conjugation of charged groups to the side chain of the phosphate, constituting one of the few biodegradable cationic polymers in the field for non-viral gene delivery. Capable of delivering exogenous genes to a cell nucleus or providing an extracellular sustained release of DNA, these cationic polyphosphoesters also serve as a valuable model to understand the important characteristics that render a polymer an effective gene carrier.Advanced Drug Delivery Reviews 05/2003; 55(4):483-99. · 11.50 Impact Factor -
Article: New polyphosphoramidate with a spermidine side chain as a gene carrier.
[show abstract] [hide abstract]
ABSTRACT: A new cationic polymer (PPA-SP), polyphosphoramidate bearing spermidine side chain, was prepared as a non-viral vector for gene delivery. PPA-SP was synthesized from poly(1,2-propylene H-phosphonate) by the Atherton-Todd reaction. The weight average molecular weight of PPA-SP was 3.44x10(4) with a number average degree of polymerization of 90, as determined by GPC/LS/RI method. The average net positive charge per polymer chain was 102. PPA-SP was able to condense plasmid DNA efficiently and formed complexes at an N/P ratio (free amino groups in polymer to phosphate groups in DNA) of 2 and above, as determined by agarose gel electrophoresis. This new gene carrier offered significant protection to DNA against nuclease degradation at N/P ratios above 2, and showed lower cytotoxicity than PLL and PEI in cell culture. The LD(50) of PPA-SP was 85 microg/ml in COS-7 cells, in contrast to 20 and 42 microg/ml for PLL and PEI, respectively. The complexes prepared in saline at N/P ratios of 5 approximately 10 had an average size of 250 nm and zeta-potential of 26 mV. PPA-SP mediated efficient gene transfection in a number of cell lines, and the transfection protocol was optimized in HEK293 cells using a luciferase plasmid as a marker gene. Gene expression mediated by PPA-SP was greatly enhanced when chloroquine was used in conjunction at a concentration of 100 microM. Under the optimized condition, PPA-SP/DNA complexes yield a luciferase expression level closed to PEI/DNA complexes or Transfast mediated transfection. In a non-invasive CNS gene delivery model, PPA-SP/DNA complexes yielded comparable bcl-2 expression as PEI/DNA complexes in mouse brain stem following injection of the complexes in the tongue.Journal of Controlled Release 10/2002; 83(1):157-68. · 5.73 Impact Factor -
Article: Water-soluble and nonionic polyphosphoester: synthesis, degradation, biocompatibility and enhancement of gene expression in mouse muscle.
[show abstract] [hide abstract]
ABSTRACT: A nonionic and water-soluble polyphosphoester, poly(2-hydroxyethyl propylene phosphate) (PPE3), was synthesized by chlorination of poly(4-methyl-2-oxo-2-hydro-1,3,2-dioxaphospholane), followed by esterification with 2-benzyloxyethanol and deprotection of the hydroxyl group by catalytic hydrogenation in the presence of Pd-C. PPE3 degraded rapidly in PBS 7.4 at 37 degrees C. The cytotoxicity and tissue compatibility assays suggested good biocompatibility of PPE3 in vitro and in vivo. The expression of pVR1255 Luc plasmid in mouse muscle after intramuscular (i.m.) injection of DNA formulated with PPE3 solution in saline was enhanced up to 4-fold compared with that of naked DNA. These results suggest the potential of this polyphosphoester for naked DNA-based gene therapy. The advantages of this polymer design include the biodegradability of the polyphosphoester and its structural versatility, which allows the fine-tuning of the physicochemical properties to optimize the enhancement of gene expression in muscle.Biomacromolecules 5(2):306-11. · 5.48 Impact Factor -
Article: Biodegradable and photocrosslinkable polyphosphoester hydrogel
[show abstract] [hide abstract]
ABSTRACT: A new biodegradable, photocrosslinkable and multifunctional macromer, poly(6-aminohexyl propylene phosphate) (PPE-HA)-ACRL, was synthesized by conjugation of acrylate groups to the side chains of PPE-HA. By controlling the synthetic conditions, different weight fractions of acrylate in the macromers were achieved as confirmed by 1H NMR. The hydrogels obtained from PPE-HA-ACRL through photocrosslinking were dominantly elastic. With increasing acrylate contents in the macromers, the hydrogels exhibited a lower swelling ratio and higher mechanical strength. The hydrogels with different crosslinking densities lost between 4.3% and 37.4% of their mass in 84 days when incubated in phosphate-buffered saline at 37 °C. No significant cytotoxicity of the macromers against bone marrow-derived mesenchymal stem cells from goat (GMSC) was observed at a concentration up to 10 mg/ml. Finally, GMSCs encapsulated in the photopolymerized gel maintained their viability when cultured in osteogenic medium for three weeks. Clear mineralization in the hydrogel scaffold was revealed by Von Kossa staining. This study suggests the potential of these biodegradable and photocrosslinkable as injectable tissue engineering scaffolds.Biomaterials. -
Article: Ternary complexes comprising polyphosphoramidate gene carriers with different types of charge groups improve transfection efficiency.
[show abstract] [hide abstract]
ABSTRACT: To understand the influence of charge groups on transfection mediated by polymer complexes, we have synthesized a series of biodegradable and cationic polyphosphoramidates (PPAs) with an identical backbone but different side chains. Our previous study showed that PPA with a spermidine side chain (PPA-SP) showed high transfection efficiency in culture, whereas PPAs with secondary, tertiary, and quaternary amino groups were significantly less efficient. To investigate whether the coexistence of 1 degrees amino charge groups with 3 degrees and 2 degrees amino charge groups in the DNA/polymer complexes would enhance their transfection efficiency, we evaluated a ternary complex system containing DNA and PPAs with 1 degrees amino groups (PPA-SP) and 3 degrees amino groups (PPA-DMA) and a quaternary complex system containing DNA and PPAs with 1 degrees and 2 degrees and 3 degrees amino groups (PPA-EA/PPA-MEA/PPA-DMA), respectively. Ternary complexes mediated 20 and 160 times higher transfection efficiency in COS-7 cells than complexes of DNA with PPA-SP or PPA-DMA alone, respectively. Similarly, quaternary complexes exhibited 8-fold higher transfection efficiency than PPA-EA/DNA complexes. The mechanism of enhancement in transfection efficiency by the mixture carriers appears to be unrelated to the particle size, zeta potential, or DNA uptake. The titration characterization and the transfection experiments using a proton pump inhibitor suggest that the enhancement effect is unlikely due to the slightly improved buffering capacity of the mixture over PPA-SP. This approach represents a simple strategy of developing polymeric gene carriers and understanding the mechanisms of polymer-mediated gene transfer.Biomacromolecules 6(1):54-60. · 5.48 Impact Factor -
Article: Galactosylated PVDF membrane promotes hepatocyte attachment and functional maintenance
[show abstract] [hide abstract]
ABSTRACT: One of the major challenges in BLAD design is to develop functional substrates suitable for hepatocyte attachment and functional maintenance. In the present study, we designed a poly(vinylidene difluoride) (PVDF) surface coated with galactose-tethered Pluronic polymer. The galactose-derived Pluronic F68 (F68-Gal) was adsorbed on PVDF membrane through hydrophobic–hydrophobic interaction between PVDF and the polypropylene oxide segment in Pluronic. The galactose density on the modified PVDF surface increased with the concentration of the F68-Gal solution, reaching 15.4 nmol galactosyl groups per cm2 when a 1 mg/ml of F68-Gal solution was used. The adsorbed F68-Gal remained relatively stable in culture medium. Rat hepatocytes attachment efficiency on F68-Gal modified PVDF membrane was similar to that on collagen-coated surface. The attached hepatocytes on PVDF/F68-Gal membrane self-assembled into multi-cellular spheroids after 1 day of culture. These attached hepatocytes in spheroids exhibited higher cell functions such as albumin synthesis and P450 1A1 detoxification function compared to unmodified PVDF membrane and collagen-coated surface. These results suggest the potential of this galactose-immobilized PVDF membrane as a suitable substrate for hepatocyte culture.Biomaterials 24(27):4893-4903. · 7.40 Impact Factor
Top co-authors
Top Journals
Institutions
-
2006
-
Johns Hopkins University
- Department of Biomedical Engineering
Baltimore, MD, USA
-
-
2004
-
Johns Hopkins Medicine
- Department of Biomedical Engineering
Baltimore, MD, USA
-
