-
[show abstract]
[hide abstract]
ABSTRACT: Dendritic cells play a key role in determining adaptive immunity, and there is growing interest in characterizing and manipulating the interactions between dendritic cells and biomaterial surfaces. Contact with several common biomaterials can induce the maturation of immature dendritic cells, but substrates that reduce dendritic cell maturation are of particular interest within the field of cell-based therapeutics where the goal is to reduce the immune response to cell-laden material carriers. In this study, we use a materials-based strategy to functionalize poly(ethylene glycol) hydrogels with immobilized immunosuppressive factors (TGF-β1 and IL-10) to reduce the maturation of immature dendritic cells. TGF-β1 and IL-10 are commonly employed as soluble factors to program dendritic cells in vitro, and we demonstrate that these proteins retain bioactivity towards dendritic cells when immobilized on hydrogel surfaces. Following stimulation with lipopolysaccharide (LPS) and/or cytokines, a dendritic cell line interacting with the surfaces of immunosuppressive hydrogels expressed reduced markers of maturation, including IL-12 and MHCII. The bioactivity of these immunomodulatory hydrogels was further confirmed with primary bone marrow-derived dendritic cells (BMDCs) isolated from non-obese diabetic (NOD) mice, as quantified by a decrease in activation markers and a significantly reduced capacity to activate T cells. Furthermore, by introducing a second signal to promote BMDC-material interactions combined with the presentation of tolerizing signals, the multifunctional PEG hydrogels were found to further increase signaling towards BMDCs, as evidenced by greater reductions in maturation markers.
Biomaterials 05/2012; 33(14):3615-25. · 7.40 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: A polymerizable superoxide dismutase mimetic (SODm) was incorporated into poly(ethylene glycol) (PEG) hydrogels to protect encapsulated cells from superoxide-mediated damage. Superoxide and other small reactive oxygen species (ROS) can cause oxidative damage to donor tissue encapsulated within size exclusion barrier materials. To enzymatically breakdown ROS within biomaterial cell encapsulation systems, Mn(III) Tetrakis[1-(3-acryloxy-propyl)-4-pyridyl] porphyrin (MnTTPyP-acryl), a polymerizable manganese metalloporphyrin SOD mimetic, was photopolymerized with PEG diacrylate (PEGDA) to create functional gels. In unmodified PEG hydrogels, a significant reduction in metabolic activity was observed when encapsulated Min6 β-cells were challenged with chemically generated superoxide. Cells encapsulated within MnTPPyP-co-PEG hydrogels, however, demonstrated greatly improved metabolic activity following various superoxide challenges. Further, cells were encapsulated and cultured for 10 days within MnTPPyP-co-PEG hydrogels and challenged with superoxide on days 4, 6, and 8. At the conclusion of this study, cells in blank PEG hydrogels had no observable metabolic activity but when encapsulated in MnTPPyP-functionalized hydrogels, cells retained 60 ± 5% of the metabolic activity compared to untreated controls.
Journal of Biomedical Materials Research Part A 10/2011; 99(1):29-37. · 2.63 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Influencing the host immune system via implantable cell-delivery devices has the potential to reduce inflammation at the transplant site and increase the likelihood of tissue acceptance. Towards this goal, an enzymatically-initiated, dip-coating technique is adapted to fabricate conformal hydrogel layers and to create immunoactive polymer coatings on cell-laden poly(ethylene glycol) (PEG) hydrogels. Glucose oxidase (GOx)-initiated dip coatings enable the rapid formation of uniform, PEG-based coatings on the surfaces of PEG hydrogels, with thicknesses up to 500 μm where the thickness is proportional to the reaction time. Biofunctional coatings were fabricated by thiolating biomolecules that were subsequently covalently incorporated into the coating layer via thiol-acrylate copolymerization. The presence of these proteins was verified via fluorescent confocal microscopy and a modified ELISA, which indicated IgG concentrations as high as 13 ± 1 ng/coated cm² were achievable. Anti-Fas antibody, known to induce T cell apoptosis, was incorporated into coatings, with or without the addition of ICAM-1 to promote T cell interaction with the functionalized coating. Jurkat T cells were seeded atop functionalized coatings and the induction of apoptosis was measured as an indicator of coating bioactivity. After 48 h of interaction with the functionalized coatings, 61 ± 9% of all cells were either apoptotic or dead, compared to only 18 ± 5% of T cells on non-functionalized coatings. Finally, the cytocompatibility of the surface-initiated GOx coating process was confirmed by modifying gels with either encapsulated β-cells or 3T3 fibroblasts within a gel that contained a PEG methacrylate coating.
Biomaterials 06/2011; 32(26):6204-12. · 7.40 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Cell encapsulation has long been investigated as a means to achieve transplant immunoprotection as it creates a physical barrier between allograft tissue and host immune cells. Encapsulation with passive barrier materials alone, however, is generally insufficient to protect donor tissue from rejection, because small cytotoxic molecules produced by activated T cells can diffuse readily into the capsule and mediate allograft death. As a means to provide bioactive protection for polymeric encapsulation devices, we investigated a functionalized polymeric coating that mimics a natural T cell regulation pathway. T cells are regulated in vivo via Fas, a well-known 'death receptor,' whereby effector cells express Fas ligand and elicit T cell apoptosis upon binding the Fas receptor on a T cell surface. Anti-Fas antibodies are capable of replicating this effect and induce T cell apoptosis in solution. Here, an iniferter-based living radical polymerization was utilized to fabricate surface-anchored polymer chains containing poly(ethylene glycol) with covalently incorporated pendant anti-Fas antibody. Using this reaction mechanism, we demonstrate fabrication conditions that yield surface densities in excess of 1.5 ng/cm(2) of incorporated therapeutic, as detected by ELISA. Additionally, we show that coatings containing anti-Fas antibody induced significant T cell apoptosis, 21+/-2% of cells, after 24h. Finally, the incorporation of a T cell adhesion ligand, intracellular adhesion molecule-1, along with anti-Fas antibody, yielded even higher levels of apoptosis, 34+/-1% of T cells, compared to either signal alone.
Biomaterials 02/2010; 31(12):3166-74. · 7.40 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: DNA microarrays have proven powerful for functional genomics studies. Several technologies exist for the generation of whole-genome arrays. It is well documented that 25mer probes directed against different regions of the same gene produce variable signal intensity values. However, the extent to which this is true for probes of greater length (60mers) is not well characterized. Moreover, this information has not previously been reported for whole-genome arrays designed against bacteria, whose genomes may differ substantially in characteristics directly affecting microarray performance.
We report here an analysis of alternative 60mer probe designs for an in-situ synthesized oligonucleotide array for the GC rich, beta-proteobacterium Burkholderia cenocepacia. Probes were designed using the ArrayOligoSel3.5 software package and whole-genome microarrays synthesized by Agilent, Inc. using their in-situ, ink-jet technology platform. We first validated the quality of the microarrays as demonstrated by an average signal to noise ratio of >1000. Next, we determined that the variance of replicate probes (1178 total probes examined) of identical sequence was 3.8% whereas the variance of alternative probes (558 total alternative probes examined) designs was 9.5%. We determined that depending upon the definition, about 2.4% of replicate and 7.8% of alternative probes produced outlier conclusions. Finally, we determined none of the probe design subscores (GC content, internal repeat, binding energy and self annealment) produced by ArrayOligoSel3.5 were predictive or probes that produced outlier signals.
Our analysis demonstrated that the use of multiple probes per target sequence is not essential for in-situ synthesized 60mer oligonucleotide arrays designed against bacteria. Although probes producing outlier signals were identified, the use of ratios results in less than 10% of such outlier conclusions. We also determined that several different measures commonly utilized in probe design were not predictive of outlier probes.
BMC Genomics 01/2006; 7:72. · 4.07 Impact Factor
