Josef Piffko

Publications of Josef Piffko

• Load-related bone modelling at the interface of orthodontic micro-implants.

  Authors: André Büchter, Dirk Wiechmann, Christoph Gaertner, Marc Hendrik, Martin Vogeler, Hans-Peter Wiesmann, Josef Piffko, Ulrich Meyer

  Clinical oral implants research. 01/2007; 17(6):714-22.

  The purpose of this study was to determine the interface reaction of two different titanium micro-implant systems activated with different load regimens. A total of 200 micro-implants (100 AbsoThe purpose of this study was to determine the interface reaction of two different titanium micro-implant systems activated with different load regimens. A total of 200 micro-implants (100 Abso Anchor and 100 Dual Top) were placed in the mandible of eight Göttinger minipigs. Two implants each were immediately loaded in the opposite direction by various forces (100, 300 or 500 cN) through tension coils. Three different distances between the neck of the implant and the bone rim (1, 2, 3 mm) were used. The loads provided by superelastic tension coils (which are known to develop a virtually constant force) led to a range of tip moments 0-900 cN mm at the neck of implants. Non-loaded implants were used as a reference. Bone tissue responses were evaluated by histology, histomorphometry and scanning electron microscopy after 22 and 70 days of loading. Implant loosening was present in the groups where the load reached 900 cN mm. No movement of implants through the bone was found in the experimental groups, for any of the applied loads. A direct bone-to-implant contact to various extents was observed at differently loaded implants. Ultrastructural analysis confirmed the clinical and histological finding that implants (except when loaded at 900 cN mm) were well osseointegrated after 22 days. An increase in the bone-to-implant contact ratio was observed during the experimental period in the coronal part of the implants in most experimental groups. The difference reached a level of statistical significance at 500 cN mm (Abso Anchor) and 600 cN mm (Dual Top). We conclude that micro-implants can not only be loaded immediately without impairment of implant stability but many enhance bone formation at the interface when the load-related biomechanics do not exceed an upper limit of tip moment at the bone rim.

• Load-related implant reaction of mini-implants used for orthodontic anchorage.

  Authors: André Büchter, Dirk Wiechmann, Stefan Koerdt, Hans-Peter Wiesmann, Josef Piffko, Ulrich Meyer

  Clinical oral implants research. 09/2005; 16(4):473-9.

  The purpose of this study was to determine the clinical and biomechanical outcome of two different titanium mini-implant systems activated with different load regimens. A total of 200 mini-implantsThe purpose of this study was to determine the clinical and biomechanical outcome of two different titanium mini-implant systems activated with different load regimens. A total of 200 mini-implants (102 Abso Anchor and 98 Dual Top) were placed in the mandible of eight Göttinger minipigs. Two implants each were immediately loaded in opposite direction by various forces (100, 300 or 500 cN) through tension coils. Additionally, three different distances between the neck of the implant and the bone rim (1, 2 and 3 mm) were used. The different load protocols were chosen to evaluate the load-related implant performance. The load was provided by superelastic tension coils, which are known to develop a virtually constant force. Non-loaded implants were used as a reference. Following an experimental loading period of 22 and 70 days half of the minipigs were sacrificed, and implant containing bone specimens evaluated for clinical performance and implant stability. Implant loosing was found to be statistically dependent on the tip moment (TM) at the bone rim. Clinical implant loosing were only present when load exceeded 900 cN mm. No movement of implants through the bone was found in the experimental groups, for any applied loads. Over the two experimental periods the non-loaded implants of one type of implant had a higher stability than those of the loaded implants. Dual Top implants revealed a slightly higher removal torque compared with Abso Anchor implants. Based on the results of this study, immediate loading of mini-implants can be performed without loss of stability when the load-related biomechanics do not exceed an upper limit of TM at the bone rim.

• Long-term alterations of oral mucosa in radiotherapy patients.

  Authors: Franz-Josef Prott, Jörg Handschel, Oliver Micke, Cord Sunderkötter, Ulrich Meyer, Josef Piffko

  International journal of radiation oncology, biology, physics. 10/2002; 54(1):203-10.

  PURPOSE: The aim of this investigation was to describe the alterations in oral mucosa after radiotherapy. METHODS AND MATERIALS: Biopsies were taken from patients before irradiation, at 60 Gy, andPURPOSE: The aim of this investigation was to describe the alterations in oral mucosa after radiotherapy. METHODS AND MATERIALS: Biopsies were taken from patients before irradiation, at 60 Gy, and 6-12 months after radiotherapy. Histomorphological evaluation of the vessels was performed, and endothelial expression of ICAM-1, VCAM-1, and E-selectin was also evaluated, as well as distribution of LFA-1-, Mac-1-, VLA-4-, RM3/1-, 27E10-, and 25F9-bearing cells in the subepithelial tissue. RESULTS: The expression of ICAM-1 was downregulated after radiotherapy, whereas the percentage of LFA-1- and VLA-4-bearing cells increased. VCAM-1 remained at low levels. The subepithelial infiltration was still dominated by RM3/1-positive macrophages. The number of vessels decreased, while the lumina of the remaining vessels in the deeper connective layer increased. CONCLUSIONS: The late effects of radiotherapy are characterized by a decreased number of blood vessels and by significantly different expression patterns of the adhesion molecules studied, and of integrins and macrophage subpopulations compared to the conditions before irradiation and at 60 Gy.