-
[show abstract]
[hide abstract]
ABSTRACT: Microbial cells engineered for efficient production of plant sesquiterpenes may allow for sustainable and scalable production of these compounds that can be used as e.g. perfumes and pharmaceuticals. Here, for the first time a Saccharomyces cerevisiae strain capable of producing high levels of α-santalene, the precursor of a commercially interesting compound, was constructed through a rationally designed metabolic engineering approach. Optimal sesquiterpene production was obtained by modulating the expression of one of the key metabolic steps of the mevalonate (MVA) pathway, squalene synthase (Erg9). To couple ERG9 expression to glucose concentration its promoter was replaced by the HXT1 promoter. In a second approach, the HXT2 promoter was used to express an ERG9 antisense construct. Using the HXT1 promoter to control ERG9 expression, it was possible to divert the carbon flux from sterol synthesis towards α-santalene improving the productivity by 3.4 fold. Combining this approach together with the overexpression of a truncated form of 3-hydroxyl-3-methyl-glutaryl-CoA reductase (HMGR) and deletion of lipid phosphate phosphatase encoded by LPP1 led to a strain with a productivity of 0.18mg/gDCWh. The titer was further increased by deleting DPP1 encoding a second FPP consuming pyrophosphate phosphatase yielding a final productivity and titer, respectively, of 0.21mg/gDCWh and 92mg/l of α-santalene.
Metabolic Engineering 03/2012; 14(2):91-103. · 5.61 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The widely used pESC vector series (Stratagene, La Jolla, CA, USA) with the bidirectional GAL1/GAL10 promoter provides the possibility of simultaneously expressing two different genes from a single vector in Saccharomyces cerevisiae. This system can be induced by galactose and is repressed by glucose. Since S. cerevisiae prefers glucose as a carbon source, and since its growth rate is higher in glucose than in galactose-containing media, we compared and evaluated seven different promoters expressed during growth on glucose (pTEF1, pADH1, pTPI1, pHXT7, pTDH3, pPGK1 and pPYK1) with two strong galactose-induced promoters (pGAL1 and pGAL10), using lacZ as a reporter gene and measuring LacZ activity in batch and continuous cultivation. TEF1 and PGK1 promoters showed the most constant activity pattern at different glucose concentrations. Based on these results, we designed and constructed two new expression vectors which contain the two constitutive promoters, TEF1 and PGK1, in opposite orientation to each other. These new vectors retain all the features from the pESC-URA plasmid except that gene expression is mediated by constitutive promoters.
Yeast 11/2010; 27(11):955-64. · 1.89 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The mevalonate pathway in the yeast Saccharomyces cerevisiae was deregulated in order to enhance the intracellular pool of farnesyl diphosphate (FPP), the direct precursor for the biosynthesis of sesquiterpenes. Over-expression of the catalytic domain of HMG1, both from the genome and plasmid, resulted in higher production of cubebol, a plant originating sesquiterpene, and increased squalene accumulation. Down-regulation of ERG9 by replacing its native promoter with the regulatable MET3 promoter, enhanced cubebol titers but simultaneous over-expression of tHMG1 and repression of ERG9 did not further improve cubebol production. Furtheremore, the concentrations of squalene and ergosterol were measured in the engineered strains. Unexpectedly, significant accumulation of squalene and restoring the ergosterol biosynthesis were observed in the ERG9 repressed strains transformed with the plasmids harboring cubebol synthase gene. This could be explained by a toxicity effect of cubebol, possibly resulting in higher transcription levels for the genes under control of MET3 promoter, which could lead to accumulation of squalene and ergosterol.
Biotechnology and Bioengineering 05/2010; 106(1):86-96. · 3.95 Impact Factor
-
José Manuel Otero,
Wanwipa Vongsangnak,
Mohammad A Asadollahi,
Roberto Olivares-Hernandes, Jérôme Maury,
Laurent Farinelli,
Loïc Barlocher,
Magne Osterås,
Michel Schalk,
Anthony Clark,
Jens Nielsen
[show abstract]
[hide abstract]
ABSTRACT: The need for rapid and efficient microbial cell factory design and construction are possible through the enabling technology, metabolic engineering, which is now being facilitated by systems biology approaches. Metabolic engineering is often complimented by directed evolution, where selective pressure is applied to a partially genetically engineered strain to confer a desirable phenotype. The exact genetic modification or resulting genotype that leads to the improved phenotype is often not identified or understood to enable further metabolic engineering.
In this work we performed whole genome high-throughput sequencing and annotation can be used to identify single nucleotide polymorphisms (SNPs) between Saccharomyces cerevisiae strains S288c and CEN.PK113-7D. The yeast strain S288c was the first eukaryote sequenced, serving as the reference genome for the Saccharomyces Genome Database, while CEN.PK113-7D is a preferred laboratory strain for industrial biotechnology research. A total of 13,787 high-quality SNPs were detected between both strains (reference strain: S288c). Considering only metabolic genes (782 of 5,596 annotated genes), a total of 219 metabolism specific SNPs are distributed across 158 metabolic genes, with 85 of the SNPs being nonsynonymous (e.g., encoding amino acid modifications). Amongst metabolic SNPs detected, there was pathway enrichment in the galactose uptake pathway (GAL1, GAL10) and ergosterol biosynthetic pathway (ERG8, ERG9). Physiological characterization confirmed a strong deficiency in galactose uptake and metabolism in S288c compared to CEN.PK113-7D, and similarly, ergosterol content in CEN.PK113-7D was significantly higher in both glucose and galactose supplemented cultivations compared to S288c. Furthermore, DNA microarray profiling of S288c and CEN.PK113-7D in both glucose and galactose batch cultures did not provide a clear hypothesis for major phenotypes observed, suggesting that genotype to phenotype correlations are manifested post-transcriptionally or post-translationally either through protein concentration and/or function.
With an intensifying need for microbial cell factories that produce a wide array of target compounds, whole genome high-throughput sequencing and annotation for SNP detection can aid in better reducing and defining the metabolic landscape. This work demonstrates direct correlations between genotype and phenotype that provides clear and high-probability of success metabolic engineering targets. The genome sequence, annotation, and a SNP viewer of CEN.PK113-7D are deposited at http://www.sysbio.se/cenpk.
BMC Genomics 01/2010; 11:723. · 4.07 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: A genome-scale metabolic model was used to identify new target genes for enhanced biosynthesis of sesquiterpenes in the yeast Saccharomyces cerevisiae. The effect of gene deletions on the flux distributions in the metabolic model of S. cerevisiae was assessed using OptGene as the modeling framework and minimization of metabolic adjustments (MOMA) as objective function. Deletion of NADPH-dependent glutamate dehydrogenase encoded by GDH1 was identified as the best target gene for the improvement of sesquiterpene biosynthesis in yeast. Deletion of this gene enhances the available NADPH in the cytosol for other NADPH requiring enzymes, including HMG-CoA reductase. However, since disruption of GDH1 impairs the ammonia utilization, simultaneous over-expression of the NADH-dependent glutamate dehydrogenase encoded by GDH2 was also considered in this study. Deletion of GDH1 led to an approximately 85% increase in the final cubebol titer. However, deletion of this gene also caused a significant decrease in the maximum specific growth rate. Over-expression of GDH2 did not show a further effect on the final cubebol titer but this alteration significantly improved the growth rate compared to the GDH1 deleted strain.
Metabolic Engineering 08/2009; 11(6):328-34. · 5.61 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Genetic engineering of metabolic pathways is a standard strategy to increase the production of metabolites of economic interest. However, such flux increases could very likely lead to undesirable changes in metabolite concentrations, producing deleterious perturbations on other cellular processes. These negative effects could be avoided by implementing a balanced increase of enzyme concentrations according to the Universal Method [Kacser and Acerenza (1993) Eur J Biochem 216:361-367]. Exact application of the method usually requires modification of many reactions, which is difficult to achieve in practice. Here, improvement of threonine production via pyruvate kinase deletion in Escherichia coli is used as a case study to demonstrate a partial application of the Universal Method, which includes performing sensitivity analysis. Our analysis predicts that manipulating a few reactions is sufficient to obtain an important increase in threonine production without major perturbations of metabolite concentrations.
Biotechnology and Bioengineering 02/2009; 103(3):609-20. · 3.95 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: A eukaryotic mevalonate pathway transferred and expressed in Escherichia coli, and a mammalian hydrocortisone biosynthetic pathway rebuilt in Saccharomyces cerevisiae are examples showing that transferring metabolic pathways from one organism to another can have a powerful impact on cell properties. In this study, we reconstructed the E. coli isoprenoid biosynthetic pathway in S. cerevisiae. Genes encoding the seven enzymatic steps of the pathway were cloned and expressed in S. cerevisiae. mRNA from the seven genes was detected, and the pathway was shown able to sustain growth of yeast in conditions of inhibition of its constitutive isoprenoid biosynthetic pathway.
FEBS Letters 12/2008; 582(29):4032-8. · 3.54 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The yeast Saccharomyces cerevisiae was chosen as a microbial host for heterologous biosynthesis of three different plant sesquiterpenes, namely valencene, cubebol, and patchoulol. The volatility and low solubility of the sesquiterpenes were major practical problems for quantification of the excreted sesquiterpenes. In situ separation of sesquiterpenes in a two-phase fermentation using dodecane as the secondary phase was therefore performed in order to enable quantitative evaluation of different strains. In order to enhance the availability of the precursor for synthesis of sesquiterpenes, farnesyl diphosphate (FPP), the ERG9 gene which is responsible for conversion of FPP to squalene was downregulated by replacing the native ERG9 promoter with the regulatable MET3 promoter combined with addition of 2 mM methionine to the medium. This strategy led to a reduced ergosterol content of the cells and accumulation of FPP derived compounds like target sesquiterpenes and farnesol. Adjustment of the methionine level during fermentations prevented relieving MET3 promoter repression and resulted in further improved sesquiterpene production. Thus, the final titer of patchoulol and farnesol in the ERG9 downregulated strain reached 16.9 and 20.2 mg/L, respectively. The results obtained in this study revealed the great potential of yeast as a cell factory for production of sesquiterpenes.
Biotechnology and Bioengineering 03/2008; 99(3):666-77. · 3.95 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Saving energy, cost efficiency, producing less waste, improving the biodegradability of products, potential for producing novel and complex molecules with improved properties, and reducing the dependency on fossil fuels as raw materials are the main advantages of using biotechnological processes to produce chemicals. Such processes are often referred to as green chemistry or white biotechnology. Metabolic engineering, which permits the rational design of cell factories using directed genetic modifications, is an indispensable strategy for expanding green chemistry. In this chapter, the benefits of using metabolic engineering approaches for the development of green chemistry are illustrated by the recent advances in microbial production of isoprenoids, a diverse and important group of natural compounds with numerous existing and potential commercial applications. Accumulated knowledge on the metabolic pathways leading to the synthesis of the principal precursors of isoprenoids is reviewed, and recent investigations into isoprenoid production using engineered cell factories are described.
Advances in biochemical engineering/biotechnology 02/2005; 100:19-51. · 1.64 Impact Factor
