-
[show abstract]
[hide abstract]
ABSTRACT: The fate of secondary biomaterial implants was determined by bio-optical imaging and plate counting, after antibiotic treatment of biomaterials-associated-infection (BAI) and surgical removal of an experimentally infected, primary implant. All primary implants and tissue samples from control mice showed bioluminescence and were culture-positive. In an antibiotic treated group, no bioluminescence was detected and only 20% of all primary implants and no tissue samples were culture-positive. After revision surgery, bioluminescence was detected in all control mice. All the implants and 80% of all tissue samples were culture-positive. In contrast, in the antibiotic treated group, 17% of all secondary implants and 33% of all tissue samples were culture-positive, despite antibiotic treatment. The study illustrates that due to the BAI of a primary implant, the infection risk of biomaterial implants is higher in revision surgery than in primary surgery, emphasizing the need for full clearance of the infection, as well as from surrounding tissues prior to implantation of a secondary implant.
Biofouling 10/2010; 26(7):761-7. · 4.43 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: This review presents the current state of Bioluminescence and Fluorescent Imaging technologies (BLI and FLI) as applied to Biomaterial-Associated Infections (BAI). BLI offers the opportunity to observe the in vivo course of BAI in small animals without the need to sacrifice animals at different time points after the onset of infection. BLI is highly dependent on the bacterial cell metabolism which makes BLI a strong reporter of viable bacterial presence. Fluorescent sources are generally more stable than bioluminescent ones and specifically targeted, which renders the combination of BLI and FLI a promising tool for imaging BAI. The sensitivity and spatial resolution of both imaging tools are, however, dependent on the imaging system used and the tissue characteristics, which makes the interpretation of images, in terms of the location and shape of the illuminating source, difficult. Tomographic reconstruction of the luminescent source is possible in the most modern instruments, enabling exact localization of a colonized implant material, spreading of infecting organisms in surrounding tissue and immunological tissue reactions. BLI studies on BAI have successfully distinguished between different biomaterials with respect to the development and clearance of BAI in vivo, simultaneously reducing animal use and experimental variation. It is anticipated that bio-optical imaging will become an indispensable technology for the in vivo evaluation of antimicrobial coatings.
Biomaterials 12/2009; 31(8):1984-95. · 7.40 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Infection of surgical meshes used in abdominal wall reconstructions often leads to removal of the implant and increases patient morbidity due to repetitive operations and hospital administrations. Treatment with antibiotics is ineffective due to the biofilm mode of growth of the infecting bacteria and bears the risk of inducing antibiotic resistance. Hence there is a need for alternative methods to prevent and treat mesh infection. Nitric oxide (NO)-releasing coatings have been demonstrated to possess bactericidal properties in vitro. It is the aim of this study to assess possible benefits of a low concentration NO-releasing carbon-based coating on monofilament polypropylene meshes with respect to infection control in vitro and in vivo. When applied on surgical meshes, NO-releasing coatings showed significant bactericidal effect on in vitro biofilms of Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and CNS. However, using bioluminescent in vivo imaging, no beneficial effects of this NO-releasing coating on subcutaneously implanted surgical meshes in mice could be observed.
Acta biomaterialia 03/2009; 5(6):1905-10. · 3.98 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Curing biomaterial-associated infection (BAI) frequently includes antibiotic treatment, implant removal and re-implantation. However, revision implants are at a greater risk of infection as they may attract bacteria from their infected surroundings. Polymer brush-coatings attract low numbers of bacteria, but the virtue of polymer brush-coatings in vivo has seldom been investigated. Here, we determine the possible benefits of polymer brush-coated versus pristine silicone rubber in revision surgery, using a murine model.
BAI was induced in 26 mice by subcutaneous implantation of silicone rubber discs with a biofilm of Staphylococcus aureus Xen29. During the development of BAI, half of the mice received rifampicin/vancomycin treatment. After 5 days, the infected discs were removed from all mice, and either a polymer brush-coated or pristine silicone rubber disc was re-implanted. Revision discs were explanted after 5 days, and the number of cfu cultured from the discs and the surrounding tissue was determined.
None of the polymer brush-coated discs after antibiotic treatment appeared colonized by staphylococci, whereas 83% of the pristine silicone rubber discs were re-infected. Polymer brush-coated discs also showed reduced colonization rates in the absence of antibiotic treatment when compared with pristine silicone rubber discs. Tissue surrounding the discs was culture-positive in all cases.
Polymer brush-coatings are less prone to re-infection than pristine silicone rubber when used in revision surgery, i.e. when implanted in a subcutaneous pocket infected by a staphylococcal BAI. Antibiotic pre-treatment during the development of BAI hardly had any effect in preventing the colonization of pristine silicone rubber.
Journal of Antimicrobial Chemotherapy 10/2008; 62(6):1323-5. · 5.07 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Infection is the main cause of biomaterials-related failure. A simple technique to test in-vivo new antimicrobial and/or nonadhesive implant coatings is unavailable. Current in vitro methods for studying bacterial adhesion and growth on biomaterial surfaces lack the influence of the host immune system. Most in vivo methods to study biomaterials-related infections routinely involve implant-removal, preventing comprehensive longitudinal monitoring. In vivo imaging circumvents these drawbacks and is based on the use of noninvasive optical imaging of bioluminescent bacteria. Staphylococcus aureus Xen29 is genetically modified to be stably bioluminescent, by the introduction of a modified full lux operon onto its chromosome. Surgical meshes with adhering S. aureus Xen29 were implanted in mice and bacterial growth and spread into the surrounding tissue was monitored longitudinally from bioluminescence with a highly sensitive CCD camera. Distinct spatiotemporal bioluminescence patterns, extending beyond the mesh area into surrounding tissues were observed. After 10 days, the number of living organisms isolated from explanted meshes was found to correlate with bioluminescence prior to sacrifice of the animals. Therefore, it is concluded that in vivo imaging using bioluminescent bacteria is ideally suited to study antimicrobial coatings taking into account the host immune system. In addition, longitudinal monitoring of infection in one animal will significantly reduce the number of experiments and animals.
Journal of Biomedical Materials Research Part B Applied Biomaterials 08/2008; 88(1):123-9. · 2.15 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: This review presents the clinical background to abdominal wall reconstruction, the different types of surgical meshes employed and known mechanisms of infection. It is shown that there are major physico-chemical differences between available meshes, which, in combination with the location of the mesh, the surgical technique applied and hernia type involved influence the infection potential.
Biomaterials 06/2007; 28(14):2314-27. · 7.40 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: This review presents the current state of Bioluminescence and Fluorescent Imaging technologies (BLI and FLI) as applied to Biomaterial-Associated Infections (BAI). BLI offers the opportunity to observe the in vivo course of BAI in small animals without the need to sacrifice animals at different time points after the onset of infection. BLI is highly dependent on the bacterial cell metabolism which makes BLI a strong reporter of viable bacterial presence. Fluorescent sources are generally more stable than bioluminescent ones and specifically targeted, which renders the combination of BLI and FLI a promising tool for imaging BAI. The sensitivity and spatial resolution of both imaging tools are, however, dependent on the imaging system used and the tissue characteristics, which makes the interpretation of images, in terms of the location and shape of the illuminating source, difficult. Tomographic reconstruction of the luminescent source is possible in the most modern instruments, enabling exact localization of a colonized implant material, spreading of infecting organisms in surrounding tissue and immunological tissue reactions. BLI studies on BAI have successfully distinguished between different biomaterials with respect to the development and clearance of BAI in vivo, simultaneously reducing animal use and experimental variation. It is anticipated that bio-optical imaging will become an indispensable technology for the in vivo evaluation of antimicrobial coatings.
Biomaterials.
-
[show abstract]
[hide abstract]
ABSTRACT: Poly(ethylene glycol) (PEG) coatings are known to reduce microbial adhesion in terms of numbers and binding strength. However, bacterial adhesion remains of the order of 104 cm−2. It is unknown whether this density of bacteria will eventually grow into a biofilm. This study investigates the kinetics of staphylococcal biofilm formation on a commercially produced, robust, cross-linked PEG-based polymer coating (OptiChem®) in vitro and in vivo. OptiChem® inhibits biofilm formation in vitro, and although adsorption of plasma proteins encourages biofilm formation, microbial growth kinetics are still strongly delayed compared to uncoated glass. In vivo, OptiChem®-coated and bare silicone rubber samples were inserted into an infected murine subcutaneous pocket model. In contrast to bare silicone rubber, OptiChem® samples did not become colonized upon reimplantation despite the fact that surrounding tissues were always culture-positive. We conclude that the commercial OptiChem® coating considerably slows down bacterial biofilm formation both in vitro and in vivo, making it an attractive candidate for biomaterials implant coating.
Acta Biomaterialia.
