Eugene Yurtsev

Publications of Eugene Yurtsev

• In situ Materials Characterization using the Tissue Diagnostic Instrument.

  Authors: Simon Y Tang, Phillip Mathews, Connor Randall, Eugene Yurtsev, Kirk Fields, Andrew Wong, Alfred Kuo, Tamara Alliston, Paul Hansma

  Polymer testing. 04/2010; 29(2):159-163.

  An understanding of the mechanical behavior of polymers is critical towards the design, implementation, and quality control of such materials. Yet experiments and method for the characterization ofAn understanding of the mechanical behavior of polymers is critical towards the design, implementation, and quality control of such materials. Yet experiments and method for the characterization of material properties of polymers remain challenging due the need to reconcile constitutive assumptions with experimental conditions. Well-established modes of mechanical testing, such as unconfined compression or uniaxial tension, require samples with specific geometries and carefully controlled orientations. Moreover, producing specimens that conform to such specifications often requires a considerable amount of sample material. In this study we validate a micromechanical indentation device, the Tissue Diagnostic Instrument (TDI), which implements a cyclic indentation method to determine the material properties of polymers and elastomeric materials. Measurements using the TDI require little or no sample preparation, and they allow the testing of sample materials in situ. In order to validate the use of the TDI, we compared measurements of modulus determined by the TDI to those obtained by unconfined compression tests and by uniaxial tension tests within the limit of small stresses and strains. The results show that the TDI measurements were significantly correlated with both unconfined compression (p<0.001; r(2) = 0.92) and uniaxial tension tests (p<0.001; r(2)=0.87). Moreover, the measurements across all three modes of testing were statistically indistinguishable from each other (p=0.92; ANOVA) and demonstrate that TDI measurements can provide a surrogate for the conventional methods of mechanical characterization.

• The bone diagnostic instrument III: testing mouse femora.

  Authors: Connor Randall, Phillip Mathews, Eugene Yurtsev, Nadder Sahar, David Kohn, Paul Hansma

  The Review of scientific instruments. 07/2009; 80(6):065108.

  Here we describe modifications that allow the bone diagnostic instrument (BDI) [P. Hansma et al., Rev. Sci. Instrum. 79, 064303 (2008); Rev. Sci. Instrum. 77, 075105 (2006)], developed to test humanHere we describe modifications that allow the bone diagnostic instrument (BDI) [P. Hansma et al., Rev. Sci. Instrum. 79, 064303 (2008); Rev. Sci. Instrum. 77, 075105 (2006)], developed to test human bone, to test the femora of mice. These modifications include reducing the effective weight of the instrument on the bone, designing and fabricating new probe assemblies to minimize damage to the small bone, developing new testing protocols that involve smaller testing forces, and fabricating a jig for securing the smaller bones for testing. With these modifications, the BDI was used to test the hypothesis that short-term running has greater benefit on the mechanical properties of the femur for young growing mice compared to older, skeletally mature mice. We measured elastic modulus, hardness, and indentation distance increase (IDI), which had previously been shown to be the best discriminators in model systems known to exhibit differences in mechanical properties at the whole bone level. In the young exercised murine femora, the IDI was significantly lower than in young control femora. Since IDI has a relation to postyield properties, these results suggest that exercise during bone development increases post yield mechanical competence. We were also able to measure effects of aging on bone properties with the BDI. There was a significant increase in the IDI, and a significant decrease in the elastic modulus and hardness between the young and old groups. Thus, with the modifications described here, the BDI can take measurements on mouse bones and obtain statistically significant results.

• The bone diagnostic instrument II: Indentation distance increase.

  Authors: Paul Hansma, Patricia Turner, Barney Drake, Eugene Yurtsev, Alexander Proctor, Phillip Mathews, Jason Lelujian, Connor Randall, Jonathan Adams, Ralf Jungmann, Federico Garza-de-Leon, Georg Fantner, Haykaz Mkrtchyan, Michael Pontin, Aaron Weaver, Morton B. Brown, Nadder Sahar, Ricardo Rossello, David Kohn

  The Review of scientific instruments. 07/2008; 79(6):064303.

  The bone diagnostic instrument (BDI) is being developed with the long-term goal of providing a way for researchers and clinicians to measure bone material properties of human bone in vivo. SuchThe bone diagnostic instrument (BDI) is being developed with the long-term goal of providing a way for researchers and clinicians to measure bone material properties of human bone in vivo. Such measurements could contribute to the overall assessment of bone fragility in the future. Here, we describe an improved BDI, the Osteoprobe IItrade mark. In the Osteoprobe IItrade mark, the probe assembly, which is designed to penetrate soft tissue, consists of a reference probe (a 22 gauge hypodermic needle) and a test probe (a small diameter, sharpened rod) which slides through the inside of the reference probe. The probe assembly is inserted through the skin to rest on the bone. The distance that the test probe is indented into the bone can be measured relative to the position of the reference probe. At this stage of development, the indentation distance increase (IDI) with repeated cycling to a fixed force appears to best distinguish bone that is more easily fractured from bone that is less easily fractured. Specifically, in three model systems, in which previous mechanical testing and/or tests reported here found degraded mechanical properties such as toughness and postyield strain, the BDI found increased IDI. However, it must be emphasized that, at this time, neither the IDI nor any other mechanical measurement by any technique has been shown clinically to correlate with fracture risk. Further, we do not yet understand the mechanism responsible for determining IDI beyond noting that it is a measure of the continuing damage that results from repeated loading. As such, it is more a measure of plasticity than elasticity in the bone.

• Publisher’s Note: “The bone diagnostic instrument II: Indentation distance increase” [Rev. Sci Instrum. 79, 064303 (2008)]

  Authors: Paul Hansma, Patricia Turner, Barney Drake, Eugene Yurtsev, Alexander Proctor, Phillip Mathews, Jason Lulejian, Connor Randall, Jonathan Adams, Ralf Jungmann, Federico Garza-de-Leon, Georg Fantner, Haykaz Mkrtchyan, Michael Pontin, Aaron Weaver, Morton B. Brown, Nadder Sahar, Ricardo Rossello, David Kohn