-
Meaghan E Germain,
Manuel Temprado,
Annie Castonguay,
Olga P Kryatova,
Elena V Rybak-Akimova,
John J Curley,
Arjun Mendiratta,
Yi-Chou Tsai,
Christopher C Cummins,
Rajeev Prabhakar, James E McDonough,
Carl D Hoff
[show abstract]
[hide abstract]
ABSTRACT: Variable temperature equilibrium studies were used to derive thermodynamic data for formation of eta(1) nitrile complexes with Mo(N[(t)Bu]Ar)(3), 1. (1-AdamantylCN = AdCN: DeltaH(degrees) = -6 +/- 2 kcal mol(-1), DeltaS(degrees) = -20 +/- 7 cal mol(-1) K(-1). C(6)H(5)CN = PhCN: DeltaH(degrees) = -14.5 +/- 1.5 kcal mol(-1), DeltaS(degrees) = -40 +/- 5 cal mol(-1) K(-1). 2,4,6-(H(3)C)(3)C(6)H(2)CN = MesCN: DeltaH(degrees) = -15.4 +/- 1.5 kcal mol(-1), DeltaS(degrees) = -52 +/- 5 cal mol(-1) K(-1).) Solution calorimetric studies show that the enthalpy of formation of 1-[eta(2)-NCNMe(2)] is more exothermic (DeltaH(degrees) = -22.0 +/- 1.0 kcal mol(-1)). Rate and activation parameters for eta(1) binding of nitriles were measured by stopped flow kinetic studies (AdCN: DeltaH(on)(++) = 5 +/- 1 kcal mol(-1), DeltaS(on)(++) = -28 +/- 5 cal mol(-1) K(-1); PhCN: DeltaH(on)(++) = 5.2 +/- 0.2 kcal mol(-1), DeltaS(on)(++) = -24 +/- 1 cal mol(-1) K(-1); MesCN: DeltaH(on)(++) = 5.0 +/- 0.3 kcal mol(-1), DeltaS(on)(++) = -26 +/- 1 cal mol(-1) K(-1)). Binding of Me(2)NCN was observed to proceed by reversible formation of an intermediate complex 1-[eta(1)-NCNMe(2)] which subsequently forms 1-[eta(2)-NCNMe(2)]: DeltaH(++)(k1) = 6.4 +/- 0.4 kcal mol(-1), DeltaS(++)(k1) = -18 +/- 2 cal mol(-1) K(-1), and DeltaH(++)(k2) = 11.1 +/- 0.2 kcal mol(-1), DeltaS(++)(k2) = -7.5 +/- 0.8 cal mol(-1) K(-1). The oxidative addition of PhSSPh to 1-[eta(1)-NCPh] is a rapid second-order process with activation parameters: DeltaH(++) = 6.7 +/- 0.6 kcal mol(-1), DeltaS(++) = -27 +/- 4 cal mol(-1) K(-1). The oxidative addition of PhSSPh to 1-[eta(2)-NCNMe(2)] also followed a second-order rate law but was much slower: DeltaH(++) = 12.2 +/- 1.5 kcal mol(-1) and DeltaS(++) = -25.4 +/- 5.0 cal mol(-1) K(-1). The crystal structure of 1-[eta(1)-NC(SPh)NMe(2)] is reported. Trapping of in situ generated 1-[eta(1)-NCNMe(2)] by PhSSPh was successful at low temperatures (-80 to -40 degrees C) as studied by stopped flow methods. If 1-[eta(1)-NCNMe(2)] is not intercepted before isomerization to 1-[eta(2)-NCNMe(2)] no oxidative addition occurs at low temperatures. The structures of key intermediates have been studied by density functional theory, confirming partial radical character of the carbon atom in eta(1)-bound nitriles. A complete reaction profile for reversible ligand binding, eta(1) to eta(2) isomerization, and oxidative addition of PhSSPh has been assembled and gives a clear picture of ligand reactivity as a function of hapticity in this system.
Journal of the American Chemical Society 10/2009; 131(42):15412-23. · 9.91 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The rates of reaction of N2CHSiMe3 with HMo(CO)3Cp (Cp = η5-C5H5) in heptane obey the rate law −d[HMo(CO)3Cp]/dt = k[HMo(CO)3Cp][N2CHSiMe3] (k = 0.035 ± 0.01 M−1 s−1 at 0 °C; ΔH = 11.7 ± 2.0 kcal/mol and ΔS = −22.0 ± 3.0 cal/(mol K)). Isotopic scrambling between DMo(CO)3Cp and N2CHSiMe3 occurs at a rate faster than the overall reaction. Reversible 1,2-addition to form the tightly bound intermediate [Me3SiCH2NβNαδ+][δ−Mo(CO)3Cp] is proposed as the first step of the reaction. Spectroscopic and computational data support this formulation. The contact ion pairs can undergo heterolytic cleavage to ions or homolytic cleavage to radicals, and the solvent influence on kobs (THF > toluene > heptane) is interpreted in terms of this model. The enthalpy of this reaction has been measured by solution calorimetry at 272 K in THF: ΔH = −11.6 ± 1.2 kcal/mol. These data, together with computed organic reaction energies allow estimation of the bond strength between the three-electron donors·N2CHSiMe3 and ·Mo(CO)2Cp to be 25 ± 5 kcal/mol stronger than the two-electron Mo−CO bond. Coordination of N2CHSiMe3 to the complexes M(PR3)2(CO)3 (M = Mo, W; R = Cy, iPr; Cy = cyclohexyl; iPr = isopropyl) alters the course of reaction with HMo(CO)3Cp. The stoichiometric reaction of Me3SiCHNNMo(PiPr3)2(CO)3 with 2 equiv of HMo(CO)3Cp produces SiMe4, Mo(N2)(PiPr3)2(CO)3, and [Mo(CO)3Cp]2. In the presence of excess N2CHSiMe3 this reaction is catalytic and has been used to experimentally measure the heat of hydrogenation of N2CHSiMe3 to N2 and SiMe4 by 2 equiv of HMo(CO)3Cp. The derived enthalpy of formation of N2CHSiMe3 (5.8 ± 3.0 kcal/mol) is in reasonable agreement with high-level theoretical calculations. X-ray crystal structure data are reported for W(CO)2(N2CH2SiMe3)Cp: triclinic, space group P1̅, a = 6.3928(7) Å, b = 10.6551(12) Å, c = 10.8766(12) Å, α = 100.632(2)°, β = 96.254(2)°, V = 721.32 Å3, Z = 2.
09/2008;
-
[show abstract]
[hide abstract]
ABSTRACT: Enthalpies of chalcogen atom transfer to Mo(N[t-Bu]Ar)3, where Ar = 3,5-C6H3Me2, and to IPr (defined as bis-(2,6-isopropylphenyl)imidazol-2-ylidene) have been measured by solution calorimetry leading to bond energy estimates (kcal/mol) for EMo(N[t-Bu]Ar)3 (E = S, 115; Se, 87; Te, 64) and EIPr (E = S, 102; Se, 77; Te, 53). The enthalpy of S-atom transfer to PMo(N[ t-Bu]Ar) 3 generating SPMo(N[t-Bu]Ar)3 has been measured, yielding a value of only 78 kcal/mol. The kinetics of combination of Mo(N[t-Bu]Ar)3 with SMo(N[t-Bu]Ar)3 yielding (mu-S)[Mo(N[t-Bu]Ar)3]2 have been studied, and yield activation parameters Delta H (double dagger) = 4.7 +/- 1 kcal/mol and Delta S (double dagger) = -33 +/- 5 eu. Equilibrium studies for the same reaction yielded thermochemical parameters Delta H degrees = -18.6 +/- 3.2 kcal/mol and Delta S degrees = -56.2 +/- 10.5 eu. The large negative entropy of formation of (mu-S)[Mo(N[t-Bu]Ar)3]2 is interpreted in terms of the crowded molecular structure of this complex as revealed by X-ray crystallography. The crystal structure of Te-atom transfer agent TePCy3 is also reported. Quantum chemical calculations were used to make bond energy predictions as well as to probe terminal chalcogen bonding in terms of an energy partitioning analysis.
Inorganic Chemistry 04/2008; 47(6):2133-41. · 4.60 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The complexes (*TeAr)Mo(CO)3(PiPr3)2 (Ar = phenyl, naphthyl; iPr = isopropyl) slowly eliminate PiPr3 at room temperature in a toluene solution to quantitatively form the dinuclear complexes [Mo(mu-TeAr)(CO)3(PiPr3)]2. The crystal structure of [Mo(mu-Te-naphthyl)(CO)3(PiPr3)]2 is reported and has a Mo-Mo distance of 3.2130 A. The enthalpy of dimerization has been measured and is used to estimate a Mo-Mo bond strength on the order of 30 kcal mol-1. Kinetic studies show the rate of formation of the dimeric chalcogen bridged complex is best fit by a rate law first order in (*TeAr)Mo(CO)3(PiPr3)2 and inhibited by added PiPr3. The reaction is proposed to occur by initial dissociation of a phosphine ligand and not by radical recombination of 2 mol of (*TeAr)Mo(CO)3(PiPr3)2. Reaction of (*TePh)Mo(CO)3(PiPr3)2, with L = pyridine (py) or CO, is rapid and quantitative at room temperature to form PhTeTePh and Mo(L)(CO)3(PiPr3)2, in keeping with thermochemical predictions. The rate of reaction of (*TeAr)W(CO)3(PiPr3)2 and CO is first-order in the metal complex and is proposed to proceed by the associative formation of the 19 e- radical complex (*TePh)W(CO)4(PiPr3)2 which extrudes a *TePh radical.
Inorganic Chemistry 03/2007; 46(3):652-9. · 4.60 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Enthalpies of oxidative addition of PhE-EPh (E = S, Se, Te) to the M(0) complexes M(PiPr3)2(CO)3 (M = Mo, W) to form stable complexes M(*EPh)(PiPr3)2(CO)3 are reported and compared to analogous data for addition to the Mo(III) complexes Mo(N[tBu]Ar)3 (Ar = 3,5-C6H3Me2) to form diamagnetic Mo(IV) phenyl chalcogenide complexes Mo(N[tBu]Ar)3(EPh). Reactions are increasingly exothermic based on metal complex, Mo(PiPr3)2(CO)3 < W(PiPr3)2(CO)3 < Mo(N[tBu]Ar)3, and in terms of chalcogenide, PhTe-TePh < PhSe-SePh < PhS-SPh. These data are used to calculate LnM-EPh bond strengths, which are used to estimate the energetics of production of a free *EPh radical when a dichalcogenide interacts with a specific metal complex. To test these data, reactions of Mo(N[tBu]Ar)3 and Mo(PiPr3)2(CO)3 with PhSe-SePh were studied by stopped-flow kinetics. First- and second-order dependence on metal ion concentration was determined for these two complexes, respectively, in keeping with predictions based on thermochemical data. ESR data are reported for the full set of bound chalcogenyl radical complexes (PhE*)M(PiPr3)2(CO)3; g values increase on going from S to Se, to Te, and from Mo to W. Calculations of electron densities of the SOMO show increasing electron density on the chalcogen atom on going from S to Se to Te. The crystal structure of W(*TePh)(PiPr3)2(CO)3 is reported.
Journal of the American Chemical Society 08/2006; 128(31):10295-303. · 9.91 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Beta-elimination is explored as a possible means of nitrogen-atom transfer into organic molecules. Molybdenum(IV) ketimide complexes of formula (Ar[t-Bu]N)3Mo(N=C(X)Ph), where Ar = 3,5-Me2C6H3 and X = SC6F5, SeC6F5, or O2CPh, are formally derived from addition of the carbene fragment [:C(X)Ph] to the terminal nitrido molybdenum(VI) complex (Ar[t-Bu]N)3Mo identical with N in which the nitrido nitrogen atom is installed by scission of molecular nitrogen. Herein the pivotal (Ar[t-Bu]N)3Mo(N=C(X)Ph) complexes are obtained through independent synthesis, and their propensity to undergo beta-X elimination, i.e., conversion to (Ar[t-Bu]N)3MoX + PhC identical with N, is investigated. Radical C-X bond formation reactions ensue when benzonitrile is complexed to the three-coordinate molybdenum(III) complex (Ar[t-Bu]N)3Mo and then treated with 0.5 equiv of X2, leading to facile assembly of the key (Ar[t-Bu]N)3Mo(N=C(X)Ph) molecules. Treated herein are synthetic, structural, thermochemical, and kinetic aspects of (i) the radical C-X bond formation and (ii) the ensuing beta-X elimination processes. Beta-X elimination is found to be especially facile for X = O2CPh, and the reaction represents an attractive component of an overall synthetic cycle for incorporation of dinitrogen-derived nitrogen atoms into organic nitrile (R-C identical with N) molecules.
Journal of the American Chemical Society 05/2006; 128(14):4881-91. · 9.91 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The kinetics of the oxidative addition of PhSeSePh and PhTeTePh to the stable 17-electron complex *Cr(CO)3C5Me5 have been studied utilizing stopped-flow techniques. The rates of reaction are first-order in each reactant, and the enthalpy of activation decreases in going from Se (deltaH(double dagger) = 7.0 +/- 0.5 kcal/mol, deltaS(double dagger) = -22 +/- 3 eu) to Te (deltaH(double dagger) = 4.0 +/- 0.5 kcal/mol, deltaS(double dagger) = -26 +/- 3 eu). The kinetics of the oxidative addition of PhSeH and *Cr(CO)3C5Me5 show a change in mechanism in going from low (overall third-order) to high (overall second-order) temperatures. The enthalpies of the oxidative addition of PhE-EPh to *Cr(CO)3C5Me5 in toluene solution have been measured and found to be -29.6, -30.8, and -28.9 kcal/mol for S, Se, and Te, respectively. These data are combined with enthalpies of activation from kinetic studies to yield estimates for the solution-phase PhE-EPh bond strengths of 46, 41, and 33 kcal/mol for E = S, Se, and Te, respectively. The corresponding Cr-EPh bond strengths are 38, 36, and 31 kcal/mol. Two methods have been used to determine the enthalpy of hydrogenation of PhSeSePh in toluene on the basis of reactions of HSPh and HSePh with either *Cr(CO)3C5Me5 or 2-pyridine thione. These data lead to a thermochemical estimate of 72 kcal/mol for the PhSe-H bond strength in toluene solution, which is in good agreement with kinetic studies of H atom transfer from HSePh at higher temperatures. The reaction of H-Cr(CO)3C5Me5 with PhSe-SePh is accelerated by the addition of a Cr radical and occurs via a rapid radical chain reaction. In contrast, the reaction of PhTe-TePh and H-Cr(CO)3C5Me5 does not occur at any appreciable rate at room temperature, even in the presence of added Cr radicals. This is in keeping with a low PhTe-H bond strength blocking the chain and implies that H-TePh < or = 63 kcal/mol. Structural data are reported for PhSe-Cr(CO)3C5Me5 and PhS-Cr(CO)3C5Me5. The two isostructural complexes do not show signs of an increase in steric strain in terms of metal-ligand bonds or angles as the Cr-EPh bond is shortened in going from Se to S. Bond strength estimates of the PhE-H and PhE-EPh derived from density functional theory calculations are in reasonable agreement with experimental data for E = Se but not for E = Te. The nature of the singly occupied molecular orbital of the *EPh radicals is calculated to show increasing localization on the chalcogenide atom in going from S to Se to Te.
Inorganic Chemistry 05/2005; 44(9):3127-36. · 4.60 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Molybdenum chalcogenobenzimidates of formula (Ph[PhE]C=N)Mo(N[t-Bu]Ar)(3) (Ar = 3,5-C(6)H(3)Me(2)) have been obtained by treatment of Mo(N[t-Bu]Ar)(3) sequentially with benzonitrile and 0.5 equiv of PhEEPh (E = S, Se, and Te). Molecular structure determinations have been carried out for the S and Se variants. The Te variant extrudes PhCN forming structurally characterized (PhTe)Mo(N[t-Bu]Ar)(3) with facility assessed via stopped-flow kinetic measurements, while the Se and S analogues exhibit increasing stability. Quantum chemical calculations and solution calorimetry have been employed as an aid to interpretation of the PhCN extrusion reaction.
Inorganic Chemistry 01/2004; 42(26):8621-3. · 4.60 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: 2-pyridinethione (2-mercaptopyridine, H-2mp) undergoes rapid oxidative addition with 2 mol of the 17-electron organometallic radical *Cr(CO)3Cp (where Cp*=C5Me5), yielding hydride H-Cr(CO)3Cp* and thiolate (eta1-2mp)Cr(CO)3Cp*. In a slower secondary reaction, (eta1-2mp)Cr(CO)3Cp* loses CO generating the N,S-chelate complex (eta2-2mp)Cr(CO)2Cp* for which the crystal structure is reported. The rate of 2-pyridine thione oxidative addition with *Cr(CO)3Cp* (abbreviated *Cr) in toluene best fits rate=kobs[H-2mp][*Cr]; kobs(288 K)=22 +/- 4 M(-1) s(-1); DeltaH++=4 +/- 1 kcal/mol; DeltaS++=- 40 +/- 5 cal/mol K. The rate of reaction is the same under CO or Ar, and the reaction of deuterated 2-pyridine thione (D-2mp) shows a negligible (inverse) kinetic isotope effect (kD/kH=1.06 +/- 0.10). The rate of decarbonylation of (eta1-2mp)Cr(CO)3Cp* forming (eta2-2mp)Cr(CO)2Cp* obeys simple first-order kinetics with kobs (288 K)=3.1x10(-4) s(-1), DeltaH++=23 +/- 1 kcal/mol, and DeltaS++=+ 5.0 +/- 2 cal/mol K. Reaction of 4-pyridine thione (4-mercaptopyridine, H-4mp) with *Cr(CO)3Cp* in THF and CH2Cl2 also follows second-order kinetics and is approximately 2-5 times faster than H-2mp in the same solvents. The relatively rapid nature of the thione versus thiol reactions is attributed to differences in the proposed 19-electron intermediate complexes, [*(S=C5H4N-H)Cr(CO)3Cp*] versus [*(H-S-C6H5)Cr(CO)3Cp*]. In comparison, reactions of pyridyl disulfides occur by a mechanism similar to that followed by aryl disulfides involving direct attack of the sulfur-sulfur bond by the metal radical. Calorimetric data indicate Cr-SR bond strengths for aryl and pyridyl derivatives are similar. The experimental conclusions are supported by B3LYP/6-311+G(3df,2p) calculations, which also provide additional insight into the reaction pathways open to the thione/thiol tautomers. For example, the reaction between H* radical and the 2-pyridine thione S atom yielding a thionyl radical is exothermic by approximately 30 kcal/mol. In contrast, the thiuranyl radical formed from the addition of H* to the 2-pyridine thiol S atom is predicted to be unstable, eliminating either H* or HS* without barrier.
Inorganic Chemistry 01/2004; 42(25):8494-503. · 4.60 Impact Factor
