-
[show abstract]
[hide abstract]
ABSTRACT: Different inner-sphere coordination environments are observed for the uranyl nitrate complexes formed with octyl-phenyl-N,N-diisobutylcarbamoylmethylphosphine oxide and tributyl phosphate in dodecane and in the hydrophobic ionic liquids (ILs) [C(4)mim][PF(6)] and [C(8)mim][N(SO(2)CF(3))(2)]. Qualitative differences in the coordination environment of the extracted uranyl species are implied by changes in peak intensity patterns and locations for uranyl UV-visible spectral bands when the solvent is changed. EXAFS data for uranyl complexes in dodecane solutions is consistent with hexagonal bipyramidal coordination and the existence of UO(2)(NO(3))(2)(CMPO)(2). In contrast, the complexes formed when uranyl is transferred from aqueous nitric acid solutions into the ILs exhibit an average equatorial coordination number of approximately 4.5. Liquid/liquid extraction results for uranyl in both ILs indicate a net stoichiometry of UO(2)(NO(3))(CMPO)(+). The concentration of the IL cation in the aqueous phase increases in proportion to the amount of UO(2)(NO(3))(CMPO)(+) in the IL phase, supporting a predominantly cation exchange mechanism for partitioning in the IL systems.
Inorganic Chemistry 05/2003; 42(7):2197-9. · 4.60 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Free-radical polymerization of methyl methacrylate and styrene using conventional organic initiators in the room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6]) is rapid and produces polymers with molecular weights up to 10x higher than from benzene; both polymerization and isolation of products were achieved without using VOCs, offering economic as well as environmental advantages.
Chemical Communications 08/2002; · 6.17 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: A series of hydrophobic task-specific ionic liquids designed to extract Hg2+ and Cd2+ from water were prepared by appending urea-, thiourea-, and thioether-substituted alkyl groups to imidazoles and combining the resulting cationic species with PF6-. The new ionic liquids were characterized and investigated for their metal ion extraction capabilities. When used in liquid/liquid extraction of Hg2+ and Cd2+ from aqueous solutions, the metal ion distribution ratios increased several orders of magnitude, regardless of whether the ionic liquids were used as the sole extracting phase or doped into a series of [1-alkyl-3-methylimidazolium][PF6] (alkyl = n-C4-C8) ionic liquids to form a 1:1 solution. In the 1:1 mixtures, as the length of the alkyl chain increased from butyl to hexyl to octyl, the metal ion distribution ratios increased. Increasing the ratio TSIL/[C4mim][PF6] resulted in higher distribution ratios for both Hg2+ and Cd2+. Overall, the thiourea- and urea-derivatized cations yielded the highest distribution ratios, and those for Hg2+ were higher than those for Cd2+; however, a change in aqueous-phase pH does not promote the stripping of metal ions from the extracting phase. The combination of these imidazolium cations and PF6- produced ionic liquids with decreased thermal stability in comparison to [C(n)mim]-[PF6]. Gaussian98 restricted Hartree-Fock geometry optimizations for one of the thiourea-appended cations shows the charge delocalization around the ring and suggests that the thiourea group may aid in deprotonating the imidazolium ring and may be responsible for the lowered thermal stability of these cations.
Environmental Science and Technology 07/2002; 36(11):2523-9. · 5.23 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The crown ethers 18-crown-6 (18C6), dicyclohexano-18-crown-6 (DCH18C6), and 4,4‘-(5‘)-di-(tert-butylcyclohexano)-18-crown-6 (Dtb18C6) were dissolved in 1-alkyl-3-methylimidazolium hexafluorophosphate ([Cnmim][PF6], n = 4, 6, 8) room-temperature ionic liquids (RTILs) and studied for the extraction of Na+, Cs+, and Sr2+ from aqueous solutions. In the absence of extractant, the distribution ratios for the metal ions indicate a strong preference for the aqueous phase. With the crown ethers as extractants in RTIL-based liquid/liquid separations, the resulting metal ion partitioning depends on the hydrophobicity of the crown ether and also on the composition of the aqueous phase (e.g., concentration of HNO3 vs Al(NO3)3). Aqueous solutions of HCl, Na3 citrate, NaNO3, and HNO3 (the latter at low concentrations) decrease the metal ion distribution ratios and also decrease the water content of the RTIL phase. High concentrations of HNO3 decompose PF6- and increase both the water content and the water solubility of the RTIL phase. Highly hydrated salts such as Al(NO3)3 and LiNO3 salt out both the RTIL ions and the crown ethers; thus, when the aqueous phase contains Al(NO3)3, the trend more closely resembles traditional solvent extraction behavior where DSr > DCs and the most hydrophobic extracting phase produces the highest partitioning. When [C8mim][PF6] is used as the extracting phase, the metal ions can be loaded from Al(NO3)3 and stripped using water. Dtb18C6 forms 1:1 complexes with Cs+ and Sr2+ and also yields the highest distribution ratios out of the three crowns examined. In comparison to traditional solvent extraction behavior, the metal ion partitioning in these systems exhibits exceptional behavior and, in certain instances, suggests a complicated partitioning mechanism, which necessitates a more thorough understanding of RTILs as solvents before interpretation of the results.
09/2000;
-
[show abstract]
[hide abstract]
ABSTRACT: Ionic liquids (ILs) are composed of organic cations and either organic or inorganic anions that remain liquid over a wide temperature range, including room temperature. IL characteristics can be dramatically adjusted (e.g., hydrophobic vs. hydrophilic) by changing the anion type, or subtly altered by changing the length or number of alkyl groups appended to the cation. Changing alkyl chain lengths in the 1-alkyl-3-methylimidazolium cation, in combination with PF6− or N(SO2CF3)2− anions, produces hydrophobic ILs with rheological properties suitable for their use in liquid/liquid separations. Actinides exhibit significant partitioning to these ILs from aqueous solutions with the addition of an extractant (e.g., octyl(phenyl)-N,N-diisobutylcarbamoylmethyl phosphine oxide) to the IL. Ionic liquids can, thus, be considered for actinide chemistry as a new class of materials with adjustable solvent characteristics, unique properties, and the potential for enhancing the principles of “green” chemistry in various chemical processes. Here we highlight the unique physical properties of some ILs and their use in liquid/liquid separations.
Journal of Solid State Chemistry.
-
[show abstract]
[hide abstract]
ABSTRACT: In an attempt to develop predictive tools for the determination of new ionic liquid solvents, QSPR models for the melting points of 126 structurally diverse pyridinium bromides in the temperature range 30-200 degrees C were developed with the CODESSA program. Six- and two-descriptor equations with squared correlation coefficients (R(2)) of 0.788 and 0.713, respectively, are reported for the melting temperatures. The models illustrate the importance of information content indices, total entropy, and the average nucleophilic reactivity index for an N atom.
Journal of Chemical Information and Computer Sciences 42(1):71-4.
-
[show abstract]
[hide abstract]
ABSTRACT: The melting points of several imidazolium-based ionic liquids or ionic liquid analogues were correlated using the CODESSA program in order to develop predictive tools for determination of suitable ionic liquid salts. The data set consisted of melting point data (degrees C) for 104 substituted imidazolium bromides divided on the basis of the N-substituents into three subsets: A-57 compounds, B-29 compounds, and C-18 compounds. The 45 benzimidazolium bromides form set D. Five-parameter correlations were obtained for (i) set A with R2 = 0.7442, (ii) set B with R2 = 0.7517, and (iii) set D with R2 = 0.6899, while set C was correlated with a three parameter equation with R(2) = 0.9432. These descriptors for predicting the melting points of the imidazolium and benzimidazolium bromides were based on the size and electrostatic interactions in the cations.
Journal of Chemical Information and Computer Sciences 42(2):225-31.
-
[show abstract]
[hide abstract]
ABSTRACT: A series of hydrophobic n-alkyl-N-isoquinolinium ionic liquids (ILs) with a linear alkyl-chain substituent containing from 4-18 carbon atoms in combination with hexafluorophosphate, bis(trifluoromethylsulfonyl)amide, and bis(perfluoroethylsulfonyl)amide have been synthesized and characterized (water content, density, DSC, TGA, and LSER). The crystal structures of [C(2)isoq][PF(6)] (prepared and isolated only for the comparative X-ray diffraction study), [C(4)isoq][PF(6)], and [C(10)isoq] [PF(6)] illustrate the underlying interactions in the higher melting salts. The isoquinolinium-based ILs studied here are interesting due to their highly aromatic nature and physical and solvent properties.
IONIC LIQUIDS IV: NOT JUST SOLVENTS ANYMORE;
-
[show abstract]
[hide abstract]
ABSTRACT: The interactions of ions in the solid state for a series of representative 1,3-dialkylimidazolium hexafluorophosphate salts (either ionic liquids or closely related) have been examined by crystallographic analysis, combined with the theoretical estimation of crystal-packing densities and lattice-interaction energies. Efficient close-packing of the ions in the crystalline states is observed, but there was no compelling evidence for specific directional hydrogen-bonding to the hexafluorophosphate anions or the formation of interstitial voids. The close-packing efficiency is supported by the theoretical calculation of ion volumes, crystal lattice energies, and packing densities, which correlated well with experimental data. The crystal density of the salts can be predicted accurately from the summation of free ion volumes and lattice energies calculated. Of even more importance for future work, on these and related salts, the solid-state density of 1,3-dialkylimidazolium hexafluorophosphate salts can be predicted with reasonable accuracy purely on the basis of on ab initio free ion volumes, and this allows prediction of lattice energies without necessarily requiring the crystal structures.
CRYSTAL GROWTH & DESIGN. 7(6):1106-1114.
