-
[show abstract]
[hide abstract]
ABSTRACT: The crystal structure of a 75 kDa central fragment of GBS104, a tip pilin from the 2063V/R strain of Streptococcus agalactiae (group B streptococcus; GBS), is reported. In addition, a homology model of the remaining two domains of GBS104 was built and a model of full-length GBS104 was generated by combining the homology model (the N1 and N4 domains) and the crystal structure of the 75 kDa fragment (the N2 and N3 domains). This rod-shaped GBS104 model is constructed of three IgG-like domains (the N1, N2 and N4 domains) and one vWFA-like domain (the N3 domain). The N1 and N2 domains of GBS104 are assembled with distinct and remote segments contributed by the N- and C-termini. The metal-binding site in the N3 domain of GBS104 is in the closed/low-affinity conformation. Interestingly, this domain hosts two long arms that project away from the metal-binding site. Using site-directed mutagenesis, two cysteine residues that lock the N3 domain of GBS104 into the open/high-affinity conformation were introduced. Both wild-type and disulfide-locked recombinant proteins were tested for binding to extracellular matrix proteins such as collagen, fibronectin, fibrinogen and laminin, and an increase in fibronectin binding affinity was identified for the disulfide-locked N3 domain, suggesting that induced conformational changes may play a possible role in receptor binding.
Acta crystallographica. Section D, Biological crystallography 06/2013; 69(Pt 6):1073-89. · 12.67 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Esp, an extracellular serine protease from Staphylococcus epidermidis, has been shown to inhibit S. aureus biofilm formation and nasal colonization. The full-length 27 kDa pro-Esp was purified and digested with thermolysin to obtain mature Esp. The mature Esp containing 216 residues crystallized in space group P2(1), with unit-cell parameters a = 39.5, b = 61.2, c = 42.5 Å, β = 98.2° and one molecule in the asymmetric unit, with an estimated solvent content of 42%. A diffraction data set has been collected to 1.8 Å resolution on a rotating-anode home-source facility.
Acta Crystallographica Section F Structural Biology and Crystallization Communications 01/2013; 69(Pt 1):49-52. · 0.51 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: A unique feature of the class-C-type sortases, enzymes essential for Gram-positive pilus biogenesis, is the presence of a flexible "lid" anchored in the active site. However, the mechanistic details of the "lid" displacement, suggested to be a critical prelude for enzyme catalysis, are not yet known. This is partly due to the absence of enzyme-substrate and enzyme-inhibitor complex crystal structures. We have recently described the crystal structures of the Streptococcus agalactiae SAG2603 V/R sortase SrtC1 in two space groups (type II and type III) and that of its "lid" mutant and proposed a role of the "lid" as a protector of the active-site hydrophobic environment. Here, we report the crystal structures of SAG2603 V/R sortase C1 in a different space group (type I) and that of its complex with a small-molecule cysteine protease inhibitor. We observe that the catalytic Cys residue is covalently linked to the small-molecule inhibitor without lid displacement. However, the type I structure provides a view of the sortase SrtC1 lid displacement while having structural elements similar to a substrate sorting motif suitably positioned in the active site. We propose that these major conformational changes seen in the presence of a substrate mimic in the active site may represent universal features of class C sortase substrate recognition and enzyme activation.
Journal of Molecular Biology 12/2011; 414(4):563-77. · 4.00 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: By combining X-ray crystallography and modelling, we describe here the atomic structure of distinct adhesive moieties of FimA, the shaft fimbrillin of Actinomyces type 2 fimbriae, which uniquely mediates the receptor-dependent intercellular interactions between Actinomyces and oral streptococci as well as host cells during the development of oral biofilms. The FimA adhesin is built with three IgG-like domains, each of which harbours an intramolecular isopeptide bond, previously described in several Gram-positive pilins. Genetic and biochemical studies demonstrate that although these isopeptide bonds are dispensable for fimbrial assembly, cell-cell interactions and biofilm formation, they contribute significantly to the proteolytic stability of FimA. Remarkably, FimA harbours two autonomous adhesive modules, which structurally resemble the Staphylococcus aureus Cna B domain. Each isolated module can bind the plasma glycoprotein asialofetuin as well as the polysaccharide receptors present on the surface of oral streptococci and epithelial cells. Thus, FimA should serve as an excellent paradigm for the development of therapeutic strategies and elucidating the precise molecular mechanisms underlying the interactions between cellular receptors and Gram-positive fimbriae.
Molecular Microbiology 06/2011; 81(5):1205-20. · 5.01 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Both Gram-negative and Gram-positive pathogens display a multitude of proteins and protein assemblies (pili or fimbriae) on
their cell surfaces, which are often used for adherence and initiate colonization and pathogenesis. Adhesive proteins known
as MSCRAMMs (microbial surface components recognizing adhesive matrix molecules), anchored by a specific enzyme called sortase
in Gram-positive bacteria, target the host’s extracellular matrix proteins (ECM) like collagen, fibrinogen and fibronectin.
In the past decade, structural analysis by X-ray crystallography has enhanced our understanding of the interactions between
MSCRAMMs and the host ECM by revealing several novel structural features that dictate surface protein assembly and the mode
of their adhesion to host tissue. The latest focus is on the recently discovered Gram-positive bacterial pili, assembly of
which is assisted by yet another specific sortase. Novel features like inter- and intra-molecular isopeptide bonds that facilitate
the stability of the pilins, and intra-molecular donor strand complementation to stabilize the adhesin-target interactions
are specific to Gram-positive bacteria. This chapter describes and discusses the common structural details between surface
proteins and pilins of Gram-positive bacteria and biological implications emanating from these structures.
05/2011: pages 175-195;
-
[show abstract]
[hide abstract]
ABSTRACT: Clumping factor B (ClfB) from Staphylococcus aureus is a bifunctional protein that binds to human cytokeratin 10 (K10) and fibrinogen (Fg). ClfB has been implicated in S. aureus colonization of nasal epithelium and is therefore a key virulence factor. People colonized with S. aureus are at an increased risk for invasive staphylococcal disease. In this study, we have determined the crystal structures of the ligand-binding region of ClfB in an apo-form and in complex with human K10 and Fg α-chain-derived peptides, respectively. We have determined the structures of MSCRAMM binding to two ligands with different sequences in the same site showing the versatile nature of the ligand recognition mode of microbial surface components recognizing adhesive matrix molecules. Both ligands bind ClfB by parallel β-sheet complementation as observed for the clumping factor A·γ-chain peptide complex. The β-sheet complementation is shorter in the ClfB·Fg α-chain peptide complex. The structures show that several residues in ClfB are important for binding to both ligands, whereas others only make contact with one of the ligands. A common motif GSSGXG found in both ligands is part of the ClfB-binding site. This motif is found in many human proteins thus raising the possibility that ClfB recognizes additional ligands.
Journal of Biological Chemistry 05/2011; 286(29):25963-72. · 4.77 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The structural biology of Gram-positive cell surface adhesins is an emerging field of research, whereas Gram-negative pilus assembly and anchoring have been extensively investigated and are well understood. Gram-positive surface proteins known as MSCRAMMs (microbial surface components recognizing adhesive matrix molecules) and individual proteins that assemble into long, hair-like organelles known as pili have similar features at the primary sequence level as well as at the tertiary structural level. Some of these conserved features are essential for their transportation from the cytoplasm and for cell wall anchoring. More importantly, the MSCRAMMs and the individual pilins are assembled with building blocks that are variants of structural modules used for human immunoglobulins. MSCRAMMs target the host's extracellular matrix proteins, such as collagen, fibrinogen, and fibronectin, and they have received considerable attention from structural biologists in the last decade, who have primarily been interested in understanding their interactions with host tissue. The recent focus is on the newly discovered pili of Gram-positive bacteria, and in this review, we highlight the advances in understanding of the individual pilus constituents and their associations and stress the similarities between the individual pilins and surface proteins.
Protein Science 03/2011; 20(5):759-72. · 2.80 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The Gram-positive pathogen Streptococcus agalactiae, known as group B Streptococcus (GBS), is the leading cause of bacterial septicemia, pneumonia, and meningitis among neonates. GBS assembles two types of pili-pilus islands (PIs) 1 and 2-on its surface to adhere to host cells and to initiate colonization for pathogenesis. The GBS PI-1 pilus is made of one major pilin, GBS80, which forms the pilus shaft, and two secondary pilins, GBS104 and GBS52, which are incorporated into the pilus at various places. We report here the crystal structure of the 35-kDa C-terminal fragment from GBS80, which is composed of two IgG-like domains (N2-N3). The structure was solved by single-wavelength anomalous dispersion using sodium-iodide-soaked crystals and diffraction data collected at the home source. The N2 domain exhibits a cnaA/DEv-IgG fold with two calcium-binding sites, while the N3 domain displays a cnaB/IgG-rev fold. We have built a model for full-length GBS80 (N1, N2, and N3) with the help of available homologous major pilin structures, and we propose a model for the GBS PI-1 pilus shaft. The N2 and N3 domains are arranged in tandem along the pilus shaft, whereas the respective N1 domain is tilted by approximately 20° away from the pilus axis. We have also identified a pilin-like motif in the minor pilin GBS52, which might aid its incorporation at the pilus base.
Journal of Molecular Biology 02/2011; 407(5):731-43. · 4.00 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Both Gram-negative and Gram-positive pathogens display a multitude of proteins and protein assemblies (pili or fimbriae) on their cell surfaces, which are often used for adherence and initiate colonization and pathogenesis. Adhesive proteins known as MSCRAMMs (microbial surface components recognizing adhesive matrix molecules), anchored by a specific enzyme called sortase in Gram-positive bacteria, target the host's extracellular matrix proteins (ECM) like collagen, fibrinogen and fibronectin. In the past decade, structural analysis by X-ray crystallography has enhanced our understanding of the interactions between MSCRAMMs and the host ECM by revealing several novel structural features that dictate surface protein assembly and the mode of their adhesion to host tissue. The latest focus is on the recently discovered Gram-positive bacterial pili, assembly of which is assisted by yet another specific sortase. Novel features like inter- and intra-molecular isopeptide bonds that facilitate the stability of the pilins, and intra-molecular donor strand complementation to stabilize the adhesin-target interactions are specific to Gram-positive bacteria. This chapter describes and discusses the common structural details between surface proteins and pilins of Gram-positive bacteria and biological implications emanating from these structures.
Advances in experimental medicine and biology 01/2011; 715:175-95. · 1.09 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The Gram-positive pathogen Streptococcus agalactiae or group B streptococcus (GBS) is the leading cause of bacterial septicemia, pneumonia and meningitis among neonates around the world. The pathogen assembles two types of pili on its surface, named PI-1 and PI-2, that mediate bacterial adherence to host cells. The GBS PI-1 pilus is formed by the major pilin GBS80, which forms the pilus shaft, and two minor pilins GBS104 and GBS52, which are incorporated into the pilus structure. While considerable structural information exists on Gram-negative pili, the structural study of Gram-positive pili is an emerging area of research. Here, the purification, crystallization and initial phasing of the 35 kDa major fragment of the backbone pilin GBS80 are reported. Crystals were obtained in two different space groups: P2(1) and C2. SAD data collected from an iodide-derivative crystal at the home source were used to obtain initial phases and interpretable electron-density maps.
Acta Crystallographica Section F Structural Biology and Crystallization Communications 12/2010; 66(Pt 12):1666-9. · 0.51 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Sortases are cysteine transpeptidases that are essential for the assembly and anchoring of cell-surface adhesins in Gram-positive bacteria. In Streptococcus agalactiae (GBS), the pilin-specific sortase SrtC1 catalyzes the polymerization of pilins encoded by pilus island 1 (PI-1) and the housekeeping sortase SrtA is necessary for cell-wall anchoring of the resulting pilus polymers. These sortases are known to utilize different substrates for pilus polymerization and cell-wall anchoring; however, the structural correlates that dictate their substrate specificity have not yet been clearly defined. This report presents the expression, purification and crystallization of SrtC1 (SAG0647) and SrtA (SAG0961) from S. agalactiae strain 2603V/R. The GBS SrtC1 has been crystallized in three crystal forms and the GBS SrtA has been crystallized in one crystal form.
Acta Crystallographica Section F Structural Biology and Crystallization Communications 09/2010; 66(Pt 9):1096-100. · 0.51 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Cobra venom factor (CVF) is a functional analog of human complement component C3b, the active fragment of C3. Similar to C3b, in human and mammalian serum, CVF binds factor B, which is then cleaved by factor D, giving rise to the CVFBb complex that targets the same scissile bond in C3 as the authentic complement convertases C4bC2a and C3bBb. Unlike the latter, CVFBb is a stable complex and an efficient C5 convertase. We solved the crystal structure of CVF, isolated from Naja naja kouthia venom, at 2.6 A resolution. The CVF crystal structure, an intermediate between C3b and C3c, lacks the TED domain and has the CUB domain in an identical position to that seen in C3b. The similarly positioned CUB and slightly displaced C345c domains of CVF could play a vital role in the formation of C3 convertases by providing important primary binding sites for factor B.
Structure 05/2009; 17(4):611-9. · 6.35 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The second component of complement (C2) is a multi-domain serine protease that provides catalytic activity for the C3 and C5 convertases of the classical and lectin pathways of human complement. The formation of these convertases requires the Mg(2+)-dependent binding of C2 to C4b and the subsequent cleavage of C2 by C1s or MASP2, respectively. The crystal structure of full-length C2 is not yet available, although the structure of its C-terminal catalytic segment C2a has been determined. The crystal structure of the N-terminal segment C2b of C2 determined to 1.8 A resolution presented here reveals the arrangement of its three CCP domains. The domains are arranged differently compared with most other CCP-domain assemblies, but their arrangement is similar to that found in the Ba part of the full-length factor B structure. The crystal structures of C2a, C2b and full-length factor B are used to generate a model for C2 and a discussion of the domain association and possible interactions with C4b during formation of the C4b-C2 complex is presented. The results of this study also suggest that upon cleavage by C1s, C2a domains undergo conformational rotation while bound to C4b and the released C2b domains may remain folded together similar to as observed in the intact protein.
Acta crystallographica. Section D, Biological crystallography 04/2009; 65(Pt 3):266-74. · 12.67 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: In-silico virtual screening of bacterial surface enzyme Staphylococcus aureus Sortase A against commercial compound libraries using FlexX software package has led to the identification of novel inhibitors. Inhibition of enzyme catalytic activity was determined by monitoring the steady state cleavage of a model peptide substrate. Preliminary structure activity relationship studies on the lead compound resulted in the identification of compounds with improved activity. The most active compound has an IC50 value of 58 microM against the enzyme.
Bioorganic & medicinal chemistry letters 02/2008; 18(1):380-5. · 2.65 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Staphylococcus epidermidis is an opportunistic pathogen and a major cause of foreign body infections. The S. epidermidis fibrinogen (Fg)-binding adhesin SdrG is necessary and sufficient for the attachment of this pathogen to Fg-coated materials. Based largely on structural analyses of the ligand binding domain of SdrG as an apo-protein and in complex with a Fg-like peptide, we proposed that SdrG follows a "dock, lock, and latch" mechanism to bind to Fg. This binding mechanism involves the docking of the ligand in a pocket formed between two SdrG subdomains followed by the movement of a C-terminal extension of one subdomain to cover the ligand and to insert and complement a beta-sheet in a neighboring subdomain. These proposed events result in a greatly stabilized closed conformation of the MSCRAMM-ligand complex. In this report, we describe a biochemical analysis of the proposed conformational changes that SdrG undergoes upon binding to its ligand. We have introduced disulfide bonds into SdrG to stabilize the open and closed forms of the apo-form of the MSCRAMM. We show that the stabilized closed form does not bind to the ligand and that binding can be restored in the presence of reducing agents such as dithiothreitol. We have also used Förster resonance energy transfer to dynamically show the conformational changes of SdrG upon binding to its ligand. Finally, we have used isothermic calorimetry to determine that hydrophobic interactions between the ligand and the protein are responsible for re-directing the C-terminal extension of the second subdomain required for triggering the beta-strand complementation event.
Journal of Biological Chemistry 02/2008; 283(1):638-47. · 4.77 Impact Factor
-
Proteins Structure Function and Bioinformatics 11/2007; 69(1):199-203. · 3.39 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Since the resolution of the first three-dimensional structure of a complement component in 1980, considerable efforts have been put into the investigation of this system through structural biology techniques, resulting in about a hundred structures deposited in the Protein Data Bank by the beginning of 2007. By revealing its mechanisms at the atomic level, these approaches significantly improve our understanding of complement, opening the way to the rational design of specific inhibitors. This review is co-authored by some of the researchers currently involved in the structural biology of complement and its purpose is to illustrate, through representative examples, how X-ray crystallography and NMR techniques help us decipher the many sophisticated mechanisms that underlie complement functions.
Molecular Immunology 10/2007; 44(16):3809-22. · 2.90 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Streptococcus agalactiae is the leading cause of neonatal pneumonia, sepsis, and meningitis. The pathogen assembles heterotrimeric pilus structures on its surface; however, their function in pathogenesis is poorly understood. We report here the crystal structure of the pilin GBS52, which reveals two IgG-like fold domains, N1 and N2. Each domain is comprised of seven antiparallel beta strands, an arrangement similar to the fold observed in the Staphylococcus aureus adhesin Cna. Consistent with its role as an adhesin, deletion of gbs52 gene significantly reduces bacterial adherence to pulmonary epithelial cells. Moreover, latex beads linked to the GBS52 protein adhere to pulmonary but not to many other epithelial cells; binding to the former is specifically inhibited by antibodies against GBS52. Nonetheless, substantial binding is only observed with N2 domain-conjugated beads. This study presents the structure of a Gram-positive pilin that utilizes a distinct IgG fold variant to mediate pathogen adherence to a specific tissue.
Structure 09/2007; 15(8):893-903. · 6.35 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: We have determined the crystal structure of the ligand binding segment of the Enterococcus faecalis collagen binding MSCRAMM ACE (microbial surface components recognizing adhesive matrix molecules adhesin of collagen from enterococci). This segment is composed of two subdomains, N(1) and N(2), each adopting an IgG-like fold and forming a putative collagen binding surface at the interface between the two subdomains. This structure is very similar to that recently reported for CNA, the collagen binding MSCRAMM of Staphylococcus aureus, for which a unique ligand binding mechanism called the Collagen Hug was proposed. We suggest that ACE binds collagen by a similar mechanism and present the first biochemical evidence for this binding model. Replacing residues in the putative collagen binding trench of ACE N(2) with Ala residues affected collagen binding. A closed conformation of ACE stabilized by an engineered disulfide bond is unable to bind collagen. Finally, the importance of the residues in the N(2) extension in stabilizing the MSCRAMM-ligand complex is demonstrated by selected point and truncation mutations.
Journal of Biological Chemistry 07/2007; 282(27):19629-37. · 4.77 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The multi-domain serine protease C2 provides the catalytic activity for the C3 and C5- convertases of the classical and lectin pathways of complement activation. Formation of these convertases requires the Mg(2+)-dependent binding of C2 to C4b, and the subsequent cleavage of C2 by C1s or MASP2, respectively. The C-terminal fragment C2a consisting of a serine protease (SP) and a von Willebrand factor type A (vWFA) domain, remains attached to C4b, forming the C3 convertase, C4b2a. Here, we present the crystal structure of Mg(2+)-bound C2a to 1.9 A resolution in comparison to its homolog Bb, the catalytic subunit of the alternative pathway C3 convertase, C3bBb. Although the overall domain arrangement of C2a is similar to Bb, there are certain structural differences. Unexpectedly, the conformation of the metal ion-dependent adhesion site and the position of the alpha7 helix of the vWFA domain indicate a co-factor-bound or open conformation. The active site of the SP domain is in a zymogen-like inactive conformation. On the basis of these structural features, we suggest a model for the initial steps of C3 convertase assembly.
Journal of Molecular Biology 04/2007; 367(1):224-33. · 4.00 Impact Factor
