-
[show abstract]
[hide abstract]
ABSTRACT: We report the formation and characterization of stable dispersions of hybrid nanoparticles in solution formed via stereocomplexation of enantiomeric poly(lactide) hybrid star polymers. The hybrid starlike polymers, having polyhedral oligomeric silsesquioxane (POSS) nanocages as the core and either poly(L-lactide) (PLLA) or poly(D-lactide) (PDLA) as the arms, are synthesized via ring-opening polymerization of lactide using octafunctional POSS as the macroinitiator. In the solid state, differential scanning calorimetry and wide-angle X-ray scattering measurements confirmed the formation of the stereocomplex in the mixture of POSS-star-PLLA and POSS-star-PDLA (50:50, wt %). In a solution of the same mixture in tetrahydrofuran (THF), sterocomplexation leads to formation of hybrid nanaoparticles. Detailed accounts of the nanoparticle formation and influence of aging and concentration have been presented. It was observed that at low concentration the stereocomplexed nanaoparticles remain stable over 45 days and are not sensitive to dilution, suggesting the formation of a stable hybrid nanoparticle dispersion in solution. In contrast, the aggregates of the individual POSS-star-PLLA or POSS-star-PDLA in THF, formed via weak solvophobic interactions, tended to disintegrate into smaller aggregates on dilution. Exploiting the PLLA-PDLA stereocomplexation with an appropriate molecular design can be a versatile route to develop stable organic/inorganic hybrid nanoparticle dispersions.
Langmuir 07/2011; 27(17):10538-47. · 4.19 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: We demonstrate that hydrophobic POSS (polyhedral oligomeric-silsesquioxane) nanoparticles, added to block copolymer solutions of poly(ethylene glycol) (PEG) and poly(methacrylisobutyl polyhedral oligomericsilsesquioxane) P(MA-POSS) as the hydrophilic and hydrophobic blocks respectively, could be employed to tailor their micelle formation, gelation, and rheological performance. For example, the hydrodynamic size of the micelles, formed by PEG5k-b-P(MA-POSS)3.6, increased from 13.6 ± 1.0 to 56.9 ± 3.7, an increase of more than four times, with 0.1 wt % (with respect to block copolymer) POSS nanoparticles in solution. However, the micelles retain their spherical morphology with core−shell structure as evidenced by calculating the values of dimensionless ratios, Rg/Rh for micelles as a function of added POSS nanoparticles content. For P(MA-POSS)-b-PEG10k-b-P(MA-POSS) triblock copolymers, which is associative in nature, addition of POSS nanoparticles resulted in formation of more robust and stronger hydrogels with a significantly higher storage modulus, G′, yield strengths, σy, and lower critical gelation concentration, cg, as compared with those for the pristine triblock copolymer. The presence of eight vinyl groups, attached to the POSS nanoparticles under investigations, is also exploited for further enhancement of rheological properties of the hydrogels with UV treatment. Finally, gel formation is induced in aqueous solutions of PEG5k-b-P(MA-POSS)3.6 diblock copolymer by introducing P(MA-POSS)-b-PEG10k-b-P(MA-POSS) triblock copolymer chains, and the rheological performance of the produced hydrogels, with certain compositions, is even superior to that of pure triblock copolymer gel.
01/2011;
-
[show abstract]
[hide abstract]
ABSTRACT: A series of well-defined amphiphilic di- and triblock copolymers have been synthesized, using atom transfer radical polymerization, with poly(ethylene glycol) (PEG) and poly(methacrylisobutyl polyhedral oligomeric silsesquioxane) P(MA-POSS) as the hydrophilic and hydrophobic blocks, respectively. The detailed self-assembly behavior of the amphiphilic macromolecules in aqueous media was studied using both static and dynamic light scattering (SLS and DLS) techniques. The evolution of block copolymer micelle formation in THF/water mixture (20/80 v/v) was monitored as the THF evaporated from the solvent mixture. Initially the block copolymer chains existed as unimers in solution, followed by the formation of smaller aggregates (R(h) < 2 nm) after 30 min, eventually growing in size to reach an equilibrium size when all the THF evaporated within 24 h. The micelles formed by the block copolymers were found to be kinetically unstable (not frozen); i.e., they tended to revert to individual copolymer chains on dilution. The hydrodynamic radii, R(h), of the micelles varied with the degree of polymerization (DP) of the hydrophobic P(MA-POSS); for example, for PEG(5K)-b-P(MA-POSS), an increase from R(h) approximately 13.3 +/- 1.1 nm to R(h) approximately 17.5 +/- 1.4 nm was observed with a nominal change in the DP of P(MA-POSS) from 4 to 6. The micelles formed by the triblock copolymers (P(MA-POSS)-b-PEG(10K)-b-P(MA-POSS)) were comparable in size to the diblock copolymer micelles; e.g., R(h) approximately 14.0 +/- 1.3 nm was found for P(MA-POSS)(4)-b-PEG(10K)-b-P(MA-POSS)(4). The micellar structures created by the triblocks in aqueous media were "flowerlike", where the PEG middle block adopted a loop conformation in the micelle corona. In addition to micelles, larger aggregates formed by P(MA-POSS)-b-PEG(10K)-b-P(MA-POSS) were also detected in solution. The larger aggregates may suggest a contribution from some PEG blocks adopting an extended conformation with one end dangling in solution, causing gelation at higher copolymer concentrations via intermicellar interactions. The P(MA-POSS)(4)-b-PEG(10K)-b- P(MA-POSS)(4) formed a gel in water at approximately 8.8 wt % copolymer concentration. No gel formation by diblock copolymers was observed; however, the addition of a small amount of triblock copolymer to an aqueous solution of diblock copolymer results in gel formation. Finally, rheological behavior of the obtained gels was also investigated.
Langmuir 07/2010; 26(14):11763-73. · 4.19 Impact Factor
-
Journal of Polymer Science Part A Polymer Chemistry 11/2009; 48(1):152 - 163. · 3.92 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Well-defined fluorinated brush-like amphiphilic diblock copolymers of poly[poly(ethylene glycol)methyl ether methacrylate] (P(PEGMA)) and poly(pentafluorostyrene) (PPFS) have been successfully synthesized via atom transfer radical polymerization (ATRP). The self-assembly behavior of these polymers in aqueous solutions was studied using (1)H NMR, fluorescence spectrometry, static and dynamic light scattering and transmission electron microscopy techniques. The micellar structure comprised of PPFS as the core and brush-like (hydrophobic main chain and hydrophilic branches) polymers as the coronas. The hydrodynamic radius (R(h)) of the micelles in aqueous solution was in the nanometer range, independent of the polymer concentration, consistent with a closed association model. Diblock copolymers with a longer P(PEGMA) block formed micelles with smaller R(h) and lower aggregation numbers consistent with an improved solubilization of the core. The micelles possessed a thick hydration layer as verified by the ratio of the radius of gyration, R(g) to the hydrodynamic radius, R(h). The aggregation number and ratio of R(g) to R(h) were observed to increase with temperature (20-50 degrees C), while the R(h) of the micelle decreased slightly over the same temperature range. An increase in temperature induced the brush-like PEG segments in the corona to dehydrate and shrink while forming micelles with larger aggregation numbers.
Langmuir 09/2009; 26(4):2361-8. · 4.19 Impact Factor
-
07/2009;
-
[show abstract]
[hide abstract]
ABSTRACT: The micelle formation by the amphiphilic polystyrene-block-poly(N-vinylpyrrolidone) (PS48-b-PNVP99) copolymer is investigated in methanol and water-methanol binary mixtures of various compositions using 1H NMR, fluorescence spectroscopy, static/dynamic light scattering (SLS/DLS), and transmission electron microscopy (TEM). Critical micelle concentrations (cmc) are determined by employing fluorescence spectroscopy and DLS measurements. The cmc of the PS48-b-PNVP99 block copolymer increases with increasing methanol content in the water-methanol binary mixtures, suggesting that methanol is a better solvent for the PS48-b-PNVP99 block copolymer than water-methanol mixtures or pure water. The amphiphilic PS48-b-PNVP99 diblock copolymer forms spherical micelles of Rh approximately 16 nm in pure methanol solution as revealed by DLS measurements. In contrast, significantly larger micelles having higher aggregation numbers are formed in water-methanol binary mixtures. Temperature dependent data reveal an increase in aggregation number and radius of gyration (Rg) concomitantly with temperature (10-40 degrees C). In contrast, the overall size (Rh) of the micelles remains almost constant over the same temperature range. An explanation is tendered that PNVP coronas dehydrate/desolvate at higher temperatures counteracting the increase in micelle size (Rh) caused by increased aggregation numbers (Nagg).
Langmuir 05/2009; 25(10):5557-64. · 4.19 Impact Factor
-
Journal of Polymer Science Part A Polymer Chemistry 10/2008; 46(22):7287 - 7298. · 3.92 Impact Factor
-
Journal of Polymer Science Part A Polymer Chemistry 07/2008; 46(16):5604 - 5615. · 3.92 Impact Factor
