-
[show abstract]
[hide abstract]
ABSTRACT: A portable "fiber optic-based sensitizer delivery" device has been developed and studied. Before there might be success in photodynamic therapy (PDT) and anti-bacterial ambitions, an understanding of basic factors on device performance were needed. Thus, the device was examined for the localized delivery of sensitizer molecules in ovarian cancer cells and production of high concentrations of singlet oxygen for their eradication in vitro. The device-tip releases stored pheophorebide by attack of singlet oxygen from sensitized oxygen gas delivered through the hollow fiber using 669-nm laser light. The performance of the device was enhanced when configured with a fluorosiliane tip by virtue of its Teflon-like property compared to a conventional glass tip (greater sensitizer quantities photoreleased and laterally diffused, and greater amounts of ovarian OVCAR-5 cancer cell killing). No cell damage was observed at 2.2 N of force applied by the probe tip itself, an amount used for many of the experiments described here. © 2013 Wiley Periodicals, Inc. Photochemistry and Photobiology © 2013 The American Society of Photobiology.
Photochemistry and Photobiology 03/2013; · 2.41 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: A microphotoreactor device was developed to generate bubbles (sized: 1.4 mm diameter, 90 µL) containing singlet oxygen at levels toxic to bacteria and fungus. As singlet oxygen decays rapidly to triplet oxygen, the bubbles leave behind no waste or by-products other than O(2). From a comparative study in deaerated, air saturated, and oxygenated solutions, it was reasoned that the singlet oxygen bubbles inactivate Escherichia coli and Aspergillus fumigatus, mainly by an oxygen gradient inside and outside of the bubble such that singlet oxygen is solvated and diffuses through the aqueous solution until it reacts with the target organism. Thus, singlet oxygen bubble toxicity was inversely proportional to the amount of dissolved oxygen in solution. In a second mechanism, singlet oxygen interacts directly with E. coli that accumulate at the gas-liquid interface although this mechanism operates at a rate approximately 10 times slower. Due to encapsulation in the gaseous core of the bubble and a 0.98 ms lifetime, the bubbles can traverse relatively long 0.39 mm distances carrying (1)O(2) far into the solution; by comparison the diffusion distance of (1)O(2) fully solvated in H(2)O is much shorter (~150 nm). Bubbles that reached the outer air/water interface contained no (1)O(2). The mechanism by which (1)O(2) deactivated organisms was explored through the addition of detergent molecules and Ca(2+) ions. Results indicate that the preferential accumulation of E. coli at the air-water interface of the bubble leads to enhanced toxicity of bubbles containing (1)O(2). The singlet oxygen device offers intriguing possibilities for creating new types of disinfection strategies based on photodynamic ((1)O(2)) bubble carriers.
Environmental Science & Technology 10/2012; · 4.80 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The usefulness of a fiber optic technique for generating singlet oxygen and releasing the pheophorbide photosensitizer has been increased by the fluorination of the porous Vycor glass tip. Singlet oxygen emerges through the fiber tip with 669-nm light and oxygen, releasing the sensitizer molecules upon a [2 + 2] addition of singlet oxygen with the ethene spacer and scission of a dioxetane intermediate. Switching from a nonfluorinated to a fluorinated glass tip led to a clear reduction of the adsorbtive affinity of the departing sensitizer with improved release into homogeneous toluene solution and bovine tissue, but no difference was found in water since the sensitizer was insoluble. High surface coverage of the nonafluorohexylsilane enhanced the cleavage efficiency by 15% at the ethene site. The fluorosilane groups also caused crowding and seemed to reduce access of (1)O(2) to the ethene site, which attenuated the total quenching rate constant k(T), although there was less wasted (1)O(2) (from surface physical quenching) at the fluorosilane-coated than the native SiOH silica. The observations support a quenching mechanism that the replacement of the SiOH groups for the fluorosilane C-H and C-F groups enhanced the (1)O(2) lifetime at the fiber tip interface due to less efficient electronic-to-vibronic energy transfer.
The Journal of Organic Chemistry 04/2012; 77(10):4557-65. · 4.45 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Laser-coupled microphotoreactors were developed to bubble singlet oxygen [(1)O(2) ((1)Δ(g))] into an aqueous solution containing an oxidizable compound. The reactors consisted of custom-modified SMA fiberoptic receptacles loaded with 150 μm silicon phthalocyanine glass sensitizer particles, where the particles were isolated from direct contact with water by a membrane adhesively bonded to the bottom of each device. A tube fed O(2) gas to the reactor chambers. In the presence of O(2), singlet oxygen was generated by illuminating the sensitizer particles with 669 nm light from an optical fiber coupled to the top of the reactor. The generated (1)O(2) was transported through the membrane by the O(2) stream and formed bubbles in solution. In solution, singlet oxygen reacted with probe compounds (9,10-anthracene dipropionate dianion, trans-2-methyl-2-pentanoate anion, N-benzoyl-D,L-methionine, or N-acetyl-D,L-methionine) to give oxidized products in two stages. The early stage was rapid and showed that (1)O(2) transfer occurred via bubbles mainly in the bulk water solution. The later stage was slow; it arose only from (1)O(2)-probe molecule contact at the gas/liquid interface. A mechanism is proposed that involves (1)O(2) mass transfer and solvation, where smaller bubbles provide better penetration of (1)O(2) into the flowing stream due to higher surface-to-volume contact between the probe molecules and (1)O(2).
Langmuir 02/2012; 28(5):3053-60. · 4.19 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: We have constructed a fiber optic device that internally flows triplet oxygen and externally produces singlet oxygen, causing a reaction at the (Z)-1,2-dialkoxyethene spacer group, freeing a pheophorbide sensitizer upon the fragmentation of a reactive dioxetane intermediate. The device can be operated and sensitizer photorelease observed using absorption and fluorescence spectroscopy. We demonstrate the preference of sensitizer photorelease when the probe tip is in contact with octanol or lipophilic media. A first-order photocleavage rate constant of 1.13 h(-1) was measured in octanol where dye desorption was not accompanied by readsorption. When the probe tip contacts aqueous solution, the photorelease was inefficient because most of the dye adsorbed on the probe tip, even after the covalent ethene spacer bonds have been broken. The observed stability of the free sensitizer in lipophilic media is reasonable even though it is a pyropheophorbide-a derivative that carries a p-formylbenzylic alcohol substituent at the carboxylic acid group. In octanol or lipid systems, we found that the dye was not susceptible to hydrolysis to pyropheophorbide-a, otherwise a pH effect was observed in a binary methanol-water system (9:1) at pH below 2 or above 8.
Photochemistry and Photobiology 07/2011; 87(6):1330-7. · 2.41 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: An optical fiber has been developed with a maneuverable mini-probe tip that sparges O(2) gas and photodetaches pheophorbide (sensitizer) molecules. Singlet oxygen is produced at the probe tip surface which reacts with an alkene spacer group releasing sensitizer upon fragmentation of a dioxetane intermediate. Optimal sensitizer photorelease occurred when the probe tip was loaded with 60 nmol sensitizer, where crowding of the pheophorbide molecules and self-quenching were kept to a minimum. The fiber optic tip delivered pheophorbide molecules and singlet oxygen to discrete locations. The 60 nmol sensitizer was delivered into petrolatum; however, sensitizer release was less efficient in toluene-d(8) (3.6 nmol) where most had remained adsorbed on the probe tip, even after the covalent alkene spacer bond had been broken. The results open the door to a new area of fiber optic-guided sensitizer delivery for the potential photodynamic therapy of hypoxic structures requiring cytotoxic control.
Journal of the American Chemical Society 05/2011; 133(20):7882-91. · 9.91 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Benzopolysulfanes, 4-CH(3)(OCH(2)CH(2))(3)NHC(O)-C(6)H(4)-1,2-S(x) (x = 3-7 and 9) were synthesized with a PEG group attached through an amide bond and examined for water solubility, antitumor activity, and propensity to equilibrate and desulfurate. LCMS and HPLC data show the PEG pentasulfane ring structure predominates, and the tri-, tetra-, hexa-, hepta-, and nonasulfanes were present at very low concentrations. The presence of the PEG group improved water solubility by 50-fold compared to the unsubstituted benzopolysulfanes, C(6)H(4)S(x) (x = 3, 5, and 7), based on intrinsic solubility measurements. Polysulfur linkages in the PEG compounds decomposed in the presence of ethanethiol and hydroxide ion. The PEG pentathiepin desulfurated rapidly, and an S(3) transfer reaction was observed in the presence of norbornene; no S(2) transfer reaction was observed with 2,3-dimethylbutadiene. The antitumor activities of the PEG-substituted benzopolysulfane mixtures were analyzed against four human tumor cell lines PC3 (prostate), DU145 (prostate), MDA-MB-231 (breast), and Jurkat (T-cell leukemia). The PEG-conjugated polysulfanes had IC(50) values 1.2-5.8 times lower than the parent "unsubstituted" benzopolysulfanes. Complete cell killing was observed for the PEG polysulfanes at 4 microM for PC3 and DU145 cells and at 12 muM for MDA-MB-231 cells. The results suggest that solubilization of the polysulfur linkage is a key parameter to the success of these compounds as drug leads.
The Journal of Organic Chemistry 08/2010; 75(16):5549-57. · 4.45 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Traditionally, Type II heterogeneous photo-oxidations produce singlet oxygen via external irradiation of a sensitizer and external supply of ground-state oxygen. A potential improvement is reported here. A hollow-core fiber-optic device was developed with an "internal" supply of light and flowing oxygen, and a porous photosensitizer-end capped configuration. Singlet oxygen was delivered through the fiber tip. The singlet oxygen steady-state concentration in the immediate vicinity of the probe tip was ca 20 fm by N-benzoyl-DL-methionine trapping. The device is portable and the singlet oxygen-generating tip is maneuverable, which opened the door to simple disinfectant studies. Complete Escherichia coli inactivation was observed in 2 h when the singlet oxygen sensitizing probe tip was immersed in 0.1 mL aqueous samples of 0.1-4.4 x 10(7) cells. Photobleaching of the probe tip occurred after ca 12 h of use, requiring baking and sensitizer reloading steps for reuse.
Photochemistry and Photobiology 05/2010; 86(4):890-4. · 2.41 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The development of the first photosensitizer/fiber optic device is reported. An oxygen-flowing, fiber-capped configuration is used for the application of heterogeneous, spatially confined singlet oxygen delivery in aqueous media. This is a unique device, unlike other heterogeneous photosensitizers, in which local concentrations of singlet oxygen can be delivered via introduction and withdrawal of the fiber tip.
The Journal of Physical Chemistry B 12/2009; 113(48):15803-6. · 3.70 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Insight into the O2 quenching mechanism of a photosensitizer (static or dynamic) would be useful for the design of heterogeneous systems to control the mode of generation of 1O2 in water. Here, we describe the use of a photosensitizer, meso-tetra(N-methyl-4-pyridyl)porphine (1), which was adsorbed onto porous Vycor glass (PVG). A maximum loading of 1.1 x 10(-6) mol 1 per g PVG was achieved. Less than 1% of the PVG surface was covered with photosensitizer 1, and the penetration of 1 reaches a depth of 0.32 mm along all faces of the glass. Time-resolved measurements showed that the lifetime of triplet 1*-ads was 57 microseconds in water. Triplet O2 quenched the transient absorption of triplet 1*-ads; for samples containing 0.9 x 10(-6)-0.9 x 10(-8) mol 1 adsorbed per g PVG, the Stern-Volmer constant, K(D), ranged from 23,700 to 32,100 M(-1). The adduct formation constant, Ks, ranged from 1310 to 510 M(-1). The amplitude of the absorption at 470 nm decreased slightly (by about 0.1) with increased O2 concentrations. Thus, the quenching behavior of triplet 1*-ads by O2 was proposed to be strongly dependent on dynamic quenching. Only approximately 10% of the quenching was attributed to the static quenching mechanism. The quenching of triplet 1*-ads was similar to that observed for photosensitizers in homogeneous solution which are often quenched dynamically by O2.
The Journal of Physical Chemistry B 01/2009; 112(49):15646-50. · 3.70 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Singlet molecular oxygen [1O2 (1Deltag)] is generated cleanly in aqueous solution upon irradiation of a heterogeneous complex, meso-tetra(N-methyl-4-pyridyl)porphine (1) adsorbed onto porous Vycor glass (PVG). The cationic photosensitizer 1 tightly binds onto PVG and gives a stable material, which does not dissociate 1 into the surrounding aqueous phase. The production of 1O2 was measured by monitoring the time-resolved 1O2 (1Deltag) phosphorescence at 1270 nm. Indirect analysis of 1O2 generation was also carried out with the photooxidation of trans-2-methyl-2-pentenoate anion, which afforded the corresponding hydroperoxide. Sensitizer-1-impregnated PVG gives rise to a new singlet oxygen generator but more importantly provides a heterogeneous system for use in water.
The Journal of Physical Chemistry B 03/2008; 112(7):1913-7. · 3.70 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Computations provide insight to the stability and isomeric possibilities of thiotropocin, tropodithietic acid, and troposulfenin. Thiotropocin and tropodithietic acid contain a flat 7-membered ring and delocalized pi-bonds similar to those of tropylium ion (C(7)H(7)(+)). Troposulfenin is far less stable; it contains a puckered tropone ring and localized bonds similar to 1,3,5-cycloheptatriene. A facile 1,5-hydrogen shift suggests that thiotropocin and tropodithietic acid exist as a pair of interconverting tautomers. Loss of an acidic proton from these three tautomers produces the same conjugate base structure.
The Journal of Organic Chemistry 02/2008; 73(1):280-3. · 4.45 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Singlet molecular oxygen [1O2 (1Δg)] is generated cleanly in aqueous solution upon irradiation of a heterogeneous complex, meso-tetra(N-methyl-4-pyridyl)porphine (1) adsorbed onto porous Vycor glass (PVG). The cationic photosensitizer 1 tightly binds onto PVG and gives a stable material, which does not dissociate 1 into the surrounding aqueous phase. The production of 1O2 was measured by monitoring the time-resolved 1O2 (1Δg) phosphorescence at 1270 nm. Indirect analysis of 1O2 generation was also carried out with the photooxidation of trans-2-methyl-2-pentenoate anion, which afforded the corresponding hydroperoxide. Sensitizer-1-impregnated PVG gives rise to a new singlet oxygen generator but more importantly provides a heterogeneous system for use in water.
01/2008;
-
[show abstract]
[hide abstract]
ABSTRACT: Natural o-benzopolysulfanes are often thought to exist as either the trisulfane or pentasulfane; the nomenclature has evolved around such notions. No study makes reference to the possible existence of natural o-benzoheptasulfanes. The work performed here indicates that a facile equilibration takes place between the tri-, penta-, and heptasulfanes (o-C(6)H(4)S(3), o-C(6)H(4)S(5), and o-C(6)H(4)S(7)) in solution. In these simpler (unnatural) compounds, the number of sulfur atoms can be established unequivocally from their independent syntheses. The o-benzopolysulfanes, even after purification, yield mixtures of compounds in solution. A similar equilibration may be anticipated for the corresponding natural products.
Journal of Natural Products 10/2007; 70(9):1492-4. · 3.13 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: A mechanism is proposed for the formation of cyclic 5,6,7,8,9-pentathiabenzocycloheptene-1,2-diol, 4, from the reaction of o-benzoquinone with reduced elemental sulfur, H2Sx. 1,6-conjugate addition to the quinone is favored over 1,4-conjugate addition. Hydrogen bonding to the quinone oxygen enhances the nucleophilicity of H2Sx by facilitating the removal of the S-H proton. We propose that initially formed 3-polysulfidobenzene-diol intermediates are oxidized to their corresponding quinones and closure of the polysulfur ring subsequently takes place at the C3-C4 bond leading to 4. A possible mechanism for the formation of the pentasulfur linkage in 4 is discussed, which is the key moiety found in a number of natural products.
The Journal of Organic Chemistry 05/2007; 72(8):2951-5. · 4.45 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: We suggest that singlet molecular oxygen [1O2 (1[Delta]g)] is formed upon irradiation of indigo 1 [in air or O2-saturated DMSO and DMSO (0.5% H2SO4)] and indigo carmine 2 [in air or O2-saturated CH3OH, D2O, and 1-butyl-3-methylimidazolium tetrafluoroborate (BmIm-BF4)]. The quantum yield for production of 1O2 is estimated to be 0.6 for 1 and 0.3-0.5 for 2. The rates of reaction of 1O2 with 1 and 2 were determined by monitoring the emission of 1O2 at 1270 nm over time. Low molar absorptivities (at 532 nm) and rapid physical quenching caused by 1 and 2 limit their utility as 1O2 photosensitizers in solution. Compounds 1 and 2 degrade slowly during the photolysis due to a self-sensitized (type I or II) photooxidation reaction. Oxidative cleavage of 1 by singlet oxygen and superoxide, and 2 by superoxide has been noted before (Kuramoto, N.; Kitao, T. J. Soc. Dyers Color. 1979, 95, 257-261; Kettle, A. J.; Clark, B. M.; Winterbourn, C. C. J. Biol. Chem. 2004, 279, 18521-18525).
Tetrahedron. 01/2006; 62:10771-10776.
