-
[show abstract]
[hide abstract]
ABSTRACT: Utilizing previously reported synthetic protocols for the halide-and metal-free synthesis of organic salts, we have prepared a new group of imidazolium and pyrrolidinium azolate anion-based salts demonstrating the general applicability of the methodology and expanding our investigation into non ion exchange routes to potentially energetic ionic liquids. Eighteen salts, out of which six exhibit melting points below 100 1C, were prepared by a simple decarboxylation reaction, which resulted in clean formation of the new compounds without the need for extensive purification. The low stability of the H 2 CO 3 by-product, and its decomposition to CO 2 and H 2 O in aqueous media, allows for purification of the salts by evaporation only.
New Journal of Chemistry 05/2013; 37:1461. · 2.61 Impact Factor
-
Marcin Smiglak,
C Corey Hines,
W Matthew Reichert,
Adam S Vincek,
Alan R Katritzky,
Joseph S Thrasher,
Luyi Sun,
Parker D Mccrary,
Preston A Beasley,
Steven P Kelley,
Robin D Rogers
[show abstract]
[hide abstract]
ABSTRACT: The possibility of forming simple energetic ionic liquids via the straightforward protonation of heterocyclic amines with nitric or picric acid was explored with 1-alkylimidazoles, 1-alkyl-2-methylimidazoles, and nitro, dinitro, and dicyano-substituted derivatives. The melting points of most of the prepared salts were lower than expected and of the 30 compounds prepared, more than half were found to melt below 100 1C. Limitations in the approach were found as a result of the use of energetic electron withdrawing substituents, such as nitro or cyano, which results in a reduction in nucleophilicity of the heterocycle and an inability to form salts with the acids studied. Interesting thermal behavior was observed with several of the new salts including supercooling and crystallization on heating. Comparison of the simple protonated imidazolium nitrate and picrate salts with their methylated analogs indicated that the protonated ionic liquids do not differ substantially in their melting points from the methylated analogs. However, the thermal stabilities of protonated imidazolium salts are much lower than their alkylated derivatives. Nitrate salts with alkylated cations tend to be more thermally stable than the corresponding picrate salts, but with protonated cations, the picrate salts tend to be approximately 70–80 1C more stable than the nitrate salts. Moreover, accelerating rate calorimetry (ARC) revealed that alkylated salts decompose much less exothermically (in some cases endothermically) than the protonated analogs, and that among all the analyzed salts, the most energetic materials found were protonated 1-methylimidazolium nitrate and 1,2-dimethylimidazolium picrate.
New Journal of Chemistry 09/2012; 36:702-722. · 2.61 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: In this proof of concept study, the ionic liquids, 2-hydroxyethylhydrazinium nitrate and 2-hydroxyethylhydrazinium dinitrate, ignited on contact with preheated Shell 405 (iridium supported on alumina) catalyst and energetically decomposed with no additional ignition source, suggesting a possible route to hydrazine replacements.
Chemical Communications 10/2010; 46(47):8965-7. · 6.17 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: A conceptual design platform for new ionic liquids with variable heterocycles, bridges, symmetry, and charge was developed using simple alkylation, click, and ionic liquid chemistries and demonstrated with 1-(2-(5-tetrazolidyl)ethyl)-3-(5-1H-tetrazolyl)methylimidazolium and its conversion into room-temperature ionic liquids as cation or as anion.
Chemical Communications 05/2010; 46(20):3544-6. · 6.17 Impact Factor
-
Berichte der deutschen chemischen Gesellschaft 05/2010; 2010(18):2760 - 2767. · 2.94 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Compartmentalized molecular level design of new energetic materials based on energetic azolate anions allows for the examination of the effects of both cation and anion on the physiochemical properties of ionic liquids. Thirty one novel salts were synthesized by pairing diverse cations (tetraphenylphosphonium, ethyltriphenylphosphonium, N-phenyl pyridinium, 1-butyl-3-methylimidazolium, tetramethyl-, tetraethyl-, and tetrabutylammonium) with azolate anions (5-nitrobenzimidazolate, 5-nitrobenzotriazolate, 3,5-dinitro-1,2,4-triazolate, 2,4-dinitroimidazolate, 4-nitro-1,2,3-triazolate, 4,5-dinitroimidazolate, 4,5-dicyanoimidazolate, 4-nitroimidazolate, and tetrazolate). These salts have been characterized by DSC, TGA, and single crystal X-ray crystallography. The azolates in general are surprisingly stable in the systems explored. Ionic liquids were obtained with all combinations of the 1-butyl-3-methylimidazolium cation and the heterocyclic azolate anions studied, and with several combinations of tetraethyl- or tetrabutylammonium cations and the azolate anions. Favorable structure-property relationships were most often achieved when changing from 4- and 4,5-disubstituted anions to 3,5- and 2,4-disubstituted anions. The most promising anion for use in energetic ionic liquids of those studied here, was 3,5-dinitro-1,2,4-triazolate, based on its contributions to the entire set of target properties.
Chemistry 02/2010; 16(5):1572-84. · 5.93 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: New, potentially green, and efficient synthetic routes for the remediation and/or re-use of perchlorate-based energetic materials have been developed. Four simple organic imidazolium- and phosphonium-based perchlorate salts/ionic liquids have been synthesized by simple, inexpensive, and nonhazardous methods, using ammonium perchlorate as the perchlorate source. By appropriate choice of the cation, perchlorate can be incorporated into an ionic liquid which serves as its own electrolyte for the electrochemical reduction of the perchlorate anion, allowing for the regeneration of the chloride-based parent ionic liquid. The electrochemical degradation of the hazardous perchlorate ion and its conversion to harmless chloride during electrolysis was studied using IR and (35)Cl NMR spectroscopies.
Chemistry 11/2009; 15(48):13441-8. · 5.93 Impact Factor
-
Chemistry 12/2008; 14(36):11314-9. · 5.93 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: In this Account of the small portion of the recent research in ionic liquids (ILs) by the Rogers Group, we fast forward through the first evolution of IL research, where ILs were studied for their unique set of physical properties and the resulting potential for tunable "green solvents", to the second evolution of ILs, where the tunability of the cation and anion independently offers almost unlimited access to targeted combinations of physical and chemical properties. This approach is demonstrated here with the field of energetic ionic liquids (EILs), which utilizes this design flexibility to find safe synthetic routes to ILs with high energy content and targeted physical properties.
Accounts of Chemical Research 12/2007; 40(11):1182-92. · 21.64 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Synthesis, using existing, and developed procedures, as well as, investigation of physical and chemical properties is directed toward development of an understanding of the criteria needed to model and predict Ionic Liquid (IL) materials incorporating energetic and complementary properties. Using a matrix/systematic screening approach, a fundamental understanding of model compounds provides core information about key component interactions that will lead to the design of new energetic ILs.
05/2007;
-
[show abstract]
[hide abstract]
ABSTRACT: 1,3-Dimethylimidazolium-2-carboxylate and carbonic acid have been used to prepare a 1,3-dimethylimidazolium hydrogen carbonate salt by means of a Krapcho reaction. The ability to form hydrogen carbonate azolium salts allows for them to be used as precursors for fast, efficient, environmentally benign, and halide-free syntheses of many ionic liquids by a simple, acid-base reaction of virtually any acid (inorganic, organic, and organic noncarboxylic) with a pK(a) less than that of HCO(3) (-). Additionally, the kinetics of this reaction can be accelerated by employing catalytic amounts of DMSO (a traditional Krapcho solvent used in decarboxylation reactions) to catalyze the decarboxylation. The crystal structure of 1,3-dimethylimidazolium hydrogen carbonate monohydrate is the first example of an imidazolium-based hydrogen carbonate salt. There is a strong 2D hydrogen-bonded network with facially pi-stacked imidazolium cations located in the cavities created by this framework.
Chemistry 02/2007; 13(18):5207-12. · 5.93 Impact Factor
-
Whitney L Hough, Marcin Smiglak,
Hetor Rodrıuez,
Richard P Swatloski,
Scott K Spear,
Daniel T Daly,
Juliusz Pernak,
Judith E Grisel,
Richard D Carliss,
Morgan D Soutullo,
James H Davis,
Robin D Rogers
[show abstract]
[hide abstract]
ABSTRACT: A modular, ionic liquid (IL)-based strategy allows compartmentalized molecular level design of a wide range of new materials with tunable biological, as well as the well known physical and chemical, properties of ILs, which thus deserve consideration as 'tunable' active pharmaceutical ingredients (APIs) with novel performance enhancement and delivery options. IL strategies can take advantage of the dual nature (discrete ions) of ILs to realize enhancements which may include controlled solubility (e.g., both hydrophilic and hydrophobic ILs are possible), bioavailability or bioactivity, stability, elimination of polymorphism, new delivery options (e.g., slow release or the IL-API as 'solvent'), or even customized pharmaceutical cocktails. Here we exemplify this approach with, among others, lidocaine docusate (LD), a hydrophobic room temperature IL which, when compared to lidocaine hydrochloride, exhibits modified solubility, increased thermal stability, and a significant enhancement in the efficacy of topical analgesia in two different models of mouse antinociception. Studies of the suppression of nerve growth factor mediated neuronal differentiation in rat pheochromocytoma (PC12) cells suggests potential differences between LD and lidocaine hydrochloride at the cellular level indicating an entirely different mechanism of action. Taken together these results suggest that the unique physiochemical properties of ILs in general, may confer a novel effect for the bioactivity of an API due to (at least) slow-release properties in addition to novel delivery mechanisms.
New Journal of Chemistry 01/2007; · 2.61 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The non-flammability of ionic liquids (ILs) is often highlighted as a safety advantage of ILs over volatile organic compounds (VOCs), but the fact that many ILs are not flammable themselves does not mean that they are safe to use near fire and/or heat sources; a large group of ILs (including commercially available ILs) are combustible due to the nature of their positive heats of formation, oxygen content, and decomposition products.
Chemical Communications 07/2006; · 6.17 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Twenty-eight novel salts with tetramethyl-, tetraethyl-, and tetrabutylammonium and 1-butyl-3-methylimidazolium cations paired with 3,5-dinitro-1,2,4-triazolate, 4-nitro-1,2,3-triazolate, 2,4-dinitroimidazolate, 4,5-dinitroimidazolate, 4,5-dicyanoimidazolate, 4-nitroimidazolate, and tetrazolate anions have been prepared and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and single-crystal X-ray crystallography. The effects of cation and anion type and structure on the physicochemical properties of the resulting salts, including several ionic liquids, have been examined and discussed. Ionic liquids (defined as having m.p.<100 degrees C) were obtained with all combinations of the 1-butyl-3-methylimidazolium cation ([C(4)mim](+)) and the heterocyclic azolate anions studied, and with several combinations of tetraethyl or tetrabutylammonium cations and the azolate anions. The [C(4)mim](+) azolates were liquid at room temperature exhibiting large liquid ranges and forming glasses on cooling with glass-transition temperatures in the range of -53 to -82 degrees C (except for the 3,5-dinitro-1,2,4-triazolate salt with m.p. 33 degrees C). Six crystal structures of the corresponding tetraalkylammonium salts were determined and the effects of changes to the cations and anions on the packing of the structure have been investigated.
Chemistry 07/2006; 12(17):4630-41. · 5.93 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Due to the high interest in the applications of ionic liquids, new, cheaper, multifunctional ionic liquids which are easy to prepare are highly desired. Here, we present a new group of air-and moisture-stable, hydrophobic ammonium-based ionic liquids and their properties, including the single-crystal X-ray structure of benzethonium nitrate. These salts have utility as anti-bacterial, anti-fungal agents. Additionally, the potential application of these ionic liquids for wood preservation was tested with positive results. The toxicity of benzalkonium and didecyldimethylammonium nitrates were studied and are presented herein.
Green Chemistry 01/2006; · 6.32 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The novel ionic liquid, 1-butyl-3-methylimidazolium 3,5-dinitro-1,2,4-triazolate has been synthesized and exhibits an unexpectedly low melting point (35 degrees C) considering the size and shape of the rigid, planar anion; analogous tetraalkylammonium salts (methyl, ethyl and n-butyl) have also been prepared and the tetraethylammonium example was characterized by single crystal X-ray diffraction.
Chemical Communications 03/2005; · 6.17 Impact Factor
-
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY. 231.
-
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY. 231.
-
[show abstract]
[hide abstract]
ABSTRACT: The previously reported preparation of 1,3-dimethylimidazolium salts by the reaction of 1,3-dialkylimidazolium-2-carboxylate zwitterions with protic acids has been reinvestigated in detail, leading to the identification of two competing reactions: isomerisation and decarboxylation. The ability to control both pathways allows this methodology to be used as an effective, green, waste-free approach to readily prepare a wide range of ionic liquids in high yields. Additionally, this reaction protocol opens new possibilities in the formation of other imidazolium salts, whose syntheses were previously either very expensive (due to ion exchange protocols involving metals like Ag) or difficult to achieve (due to multiple extractions and large quantities of hard to remove inorganic by-products).
GREEN CHEMISTRY. 9(1):90-98.
-
[show abstract]
[hide abstract]
ABSTRACT: Received (in St Louis, MO, USA) 6th July 2005, Accepted 2nd December 2005 First published as an Advance Article on the web 13th January 2006 Twelve novel 1,3-dialkylimidazolium salts containing strongly electron-withdrawing nitro-and cyano-functionalities directly appended to the cationic heterocyclic rings have been synthesized; the influences of the substituents on both formation and thermal properties of the resultant ionic liquids have been determined by DSC, TGA, and single crystal X-ray diffraction, showing that an electron-withdrawing nitro-substituent can be successfully appended and has a similar influence on the melting behaviour as that of corresponding methyl group substitution. Synthesis of di-, or trinitro-substituted 1,3-dialkylimidazolium cations was unsuccessful due to the resistance of dinitro-substituted imidazoles to undergo either N-alkylation or protonation, while 1-alkyl-4,5-dicyanoimidazoles were successfully alkylated to obtain 1,3-dialkyl-4,5-dicyanoimidazolium salts. Five crystal structures (one of each cation type) show that, in the solid state, the NO 2 -group has little significant effect, beyond the steric contribution, on the crystal packing.
