-
[show abstract]
[hide abstract]
ABSTRACT: The aim of this study was to prepare different types of paclitaxel-loaded, PLGA-based microparticles and lipidic implants, which can directly be injected into the brain tissue. Releasing the drug in a time-controlled manner over several weeks, these systems are intended to optimize the treatment of brain tumors. The latter is particularly difficult because of the blood-brain barrier (BBB), hindering most drugs to reach the target tissue upon systemic administration. Especially paclitaxel (being effective for the treatment of ovarian, breast, lung and other cancers) is not able to cross the BBB to a notable extent since it is a substrate of the efflux transporter P-glycoprotein. Both, biodegradable microparticles as well as small, cylindrical, glycerol tripalmitate-based implants (which can be injected using standard needles) were prepared with different paclitaxel loadings. The effects of several formulation and processing parameters on the resulting drug release kinetics were investigated in phosphate buffer pH 7.4 as well as in a diethylnicotinamide (DENA)/phosphate buffer mixture. Using DSC, SEM, SEC and optical microscopy deeper insight into the underlying drug release mechanisms could be gained. The presence of DENA in the release medium significantly increased the solubility of paclitaxel, accelerated PLGA degradation, increased the mobility of the polymer and drug molecules and fundamentally altered the geometry of the systems, resulting in increased paclitaxel release rates.
International Journal of Pharmaceutics 06/2006; 314(2):127-36. · 3.35 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The aim of this study was to develop programmable implants with a reproducible delayed onset of release followed by several weeks of controlled release. For this purpose, a drug-loaded core was embedded into a drug-free bulk-eroding poly(D,L lactic-co-glycolic acid) or poly(D,L lactic acid) mantle. The manufacturing procedure was established and optimized for three mantle materials, which showed delay times ranging from 7 to 83 days. Triglycerides with fatty acid chain lengths from C12 to C18 were investigated as core materials, producing release periods from 2 to 16 weeks. Concomitantly, applying a convolution/deconvolution model showed the possibility of theoretical prediction of the resulting release profiles.
International Journal of Pharmaceutics 06/2006; 314(2):161-9. · 3.35 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: The aim of this study was to better understand the mass transport mechanisms involved in the control of drug release from lipid-based implants. Different types of triglyceride-based cylinders were prepared by compression. Glycerol-trilaurate, -trimyristate, -tripalmitate and -tristearate were used as model lipids, lysozyme and pyranine as model drugs. The effects of several formulation and processing parameters on the resulting drug release kinetics in phosphate buffer pH 7.4 were studied and the obtained results analyzed using Fick's second law of diffusion. Interestingly, lysozyme release from implants prepared by compression of a lyophilized emulsion (containing dissolved drug and lipid) was found to be purely diffusion-controlled, irrespective of the type of triglyceride. In contrast, the dominating release mechanism depended on the type of lipid in the case of pyranine-loaded implants prepared by compression of a lyophilized lipid-drug solution: with glycerol-trilaurate and -tristearate the systems were found to be purely diffusion-controlled, whereas also other mass transport phenomena are of importance in glycerol-trimyristate and -tripalmitate-based devices. Similarly, changes in the size of the compressed lipid-drug particles, drug loading and compression force significantly affected the underlying release mechanisms. The addition of a drug-free, poly(lactic-co-glycolic acid) (PLGA)-based coating around the implants delayed the onset of pyranine release for about 20 days. Interestingly, the subsequent drug release was purely diffusion-controlled, irrespective of the type of triglyceride. Also the addition of different amounts (and particle size fractions) of saccharose to pyranine-loaded implants led to purely diffusion-controlled drug release.
International Journal of Pharmaceutics 06/2006; 314(2):137-44. · 3.35 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Triglycerides are a promising class of material for the parenteral delivery of drugs and have become the focus of tremendous research efforts in recent years. The aim of this study was to investigate the biocompatibility of glyceroltripalmitate as well as the influence of cholesterol and distearoyl-phosphatidyl-choline (DSPC) on the erosion behavior of the lipid. For these investigations, two in vivo studies were carried out, in which cylindrical matrices of 2 mm diameter were manufactured and subcutaneously implanted in immunocompetent NMRI-mice. After excision of the implants, tissue reactions of the animals as well as changes in the weight, shape and microstructure of the implants were investigated. The triglyceride and cholesterol showed good biocompatibility, as indicated by their minimal encapsulation in connective tissue and the absence of inflammatory reactions. Increasing the levels of phospholipid in the implants, however, led to an increased inflammatory reaction. In contrast to cholesterol, which did not affect erosion, the incorporation of DSPC into the triglyceride matrices led to clearly visible signs of degradation.
International Journal of Pharmaceutics 06/2006; 314(2):153-60. · 3.35 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Matrices made of glyceryl trimyristate as a bioerodible and biocompatible material were manufactured by compression in dimensions that would still allow an application via injection. Pyranine, as a low molecular hydrophilic compound with a low detection limit, and tetramethylrhodamine labeled bovine serum albumin (TAMRA-BSA), as a high molecular weight (66 kDa) protein compound, served as model drugs for release investigations. In vitro studies with pyranine revealed that release depends substantially on the gelatin content of the matrices, which proved to be a useful tool as a release modifier. The duration of the drug release period can be adjusted to a desired time interval ranging from days to weeks by choosing the right gelatin content. Moreover, results illustrated the importance of the molecular weight and the nature of the compound to be incorporated into such matrices, since investigations with TAMRA-BSA showed a more pronounced burst release and altered release profiles and periods. Experiments with hyaluronidase, which served as a model enzyme to assess the problem of protein integrity in such matrices, suggested that proteins may display sufficient stability during the manufacturing procedure of the cylinders or while in contact with the triglyceride matrices. In addition to in vitro investigations, a study in mice revealed that after 15 days of subcutaneous implantation the matrices showed a good in vivo stability. The main conclusion that could be drawn from these results was that triglycerides are a promising alternative to biodegradable polymers for the development of parenteral release systems for protein and peptide drugs.
02/2003; 8(1):71-79.
-
[show abstract]
[hide abstract]
ABSTRACT: Matrices made of glyceryl trimyristate as a bioerodible and biocompatible material were manufactured by compression in dimensions that would still allow an application via injection. Pyranine, as a low molecular hydrophilic compound with a low detection limit, and tetramethylrhodamine labeled bovine serum albumin (TAMRA-BSA), as a high molecular weight (66 kDa) protein compound, served as model drugs for release investigations. In vitro studies with pyranine revealed that release depends substantially on the gelatin content of the matrices, which proved to be a useful tool as a release modifier. The duration of the drug release period can be adjusted to a desired time interval ranging from days to weeks by choosing the right gelatin content. Moreover, results illustrated the importance of the molecular weight and the nature of the compound to be incorporated into such matrices, since investigations with TAMRA-BSA showed a more pronounced burst release and altered release profiles and periods. Experiments with hyaluronidase, which served as a model enzyme to assess the problem of protein integrity in such matrices, suggested that proteins may display sufficient stability during the manufacturing procedure of the cylinders or while in contact with the triglyceride matrices. In addition to in vitro investigations, a study in mice revealed that after 15 days of subcutaneous implantation the matrices showed a good in vivo stability. The main conclusion that could be drawn from these results was that triglycerides are a promising alternative to biodegradable polymers for the development of parenteral release systems for protein and peptide drugs.
Pharmaceutical Development and Technology 02/2003; 8(1):71-9. · 1.36 Impact Factor
-
-
-
-
-
-
-
-
-
-