Publications (3)7.11 Total impact
-
Article: Probing the molecular level of polyimide-based solvent resistant nanofiltration membranes with positron annihilation spectroscopy.
[show abstract] [hide abstract]
ABSTRACT: Positron annihilation spectroscopy (PAS) has been performed to link fundamental polymer properties to membrane performance, more specifically for polyimide (PI)-based solvent-resistant nanofiltration membranes. Laboratory-made membranes with well-known properties were applied first to define proper pretreatment conditions for the membrane to allow PAS-analysis and to allow more correct linking of PAS results to membrane properties. This knowledge was then applied to probe the structure of commercial PI-based Starmem membranes.The Journal of Physical Chemistry B 08/2009; 113(30):10170-6. · 3.70 Impact Factor -
Article: Physico-chemical characterization of nanofiltration membranes.
[show abstract] [hide abstract]
ABSTRACT: This study presents a methodology for an in-depth characterization of six representative commercial nanofiltration membranes. Laboratory-made polyethersulfone membranes are included for reference. Besides the physical characterization [molecular weight cut-off (MWCO), surface charge, roughness and hydrophobicity], the membranes are also studied for their chemical composition [attenuated total reflectance Fourier spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS)] and porosity [positron annihilation spectroscopy (PAS)]. The chemical characterization indicates that all membranes are composed of at least two different layers. The presence of an additional third layer is proved and studied for membranes with a polyamide top layer. PAS experiments, in combination with FIB (focused ion beam) images, show that these membranes also have a thinner and a less porous skin layer (upper part of the top layer). In the skin layer, two different pore sizes are observed for all commercial membranes: a pore size of 1.25-1.55 angstroms as well as a pore size of 3.20-3.95 angstroms (both depending on the membrane type). Thus, the pore size distribution in nanofiltration membranes is bimodal, in contrast to the generally accepted log-normal distribution. Although the pore sizes are rather similar for all commercial membranes, their pore volume fraction and hence their porosity differ significantly.ChemPhysChem 03/2007; 8(3):370-9. · 3.41 Impact Factor -
Article: Free Volume Determination of Azobenzene−PMMA Copolymer by a Pulsed Low-Energy Positron Lifetime Beam with in-Situ UV Illumination
[show abstract] [hide abstract]
ABSTRACT: The free volume properties of a poly(methyl methacrylate)−azobenzene copolymer were for the first time directly probed by use of a low-energy positron lifetime beam with in-situ excitation capabilities, showing that the free volume cavity size was not appreciably influenced by photoisomerization and thermal isomerization in the temperature range 34−180 °C. Isomerization is therefore suggested to occur without any molecular rearrangement of the glassy polymer matrix, which would also account for the lack of any shift to shorter wavelengths for the photoisomerization occurring in a glassy polymer in comparison to a chloroform solution. A decrease in the thermal isomerization rate at room temperature caused by the glassy polymer is explained in terms of a model in which only a fraction of the azobenzene is free to isomerize. The cis-azobenzene was found to be an efficient inhibitor of positronium formation, which enabled measurements of thermal isomerization rates and changes in the steady-state concentration of cis-azobenzene for an illuminated sample as a function of temperature.09/2004;
