-
[show abstract]
[hide abstract]
ABSTRACT: In this paper, the authors discuss the modal and lasing properties of multicore photonic crystal fiber lasers in the context of high power/energy production from fiber cores with very large mode area. Supermode selection methods like Talbot imaging or far-field aperturing are tested using 6-, 7-, and 18-core fibers. It is shown that in-phase mode selection is achieved efficiently by using either method. The fibers have been tested in continuous-wave (CW) and Q-switched laser operation. The mode field area is as large as 4240 mum<sup>2</sup> for one of the fibers, providing up to 2 mJ of pulse energy in Q-switched operations with 30 ns pulse duration.
IEEE Journal of Selected Topics in Quantum Electronics 05/2009; · 3.78 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: A novel microstructured fibre has been created for use in an optical interconnection system. The fibre has low crosstalk with a high density of cores corresponding to 1150 channels/mm<sup>2</sup>. A repeating pseudorandom binary sequence has been used to demonstrate a four-channel transmit/receive system using vertical cavity surface emitting lasers as both emitters and detectors.
Electronics Letters 04/2006; · 0.96 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: We report on the laser properties of multicore photonic crystal fiber lasers. A stable phase locking of six- and seven-core structures through evanescent coupling is observed. Effective supermode selection is obtained by using both diffraction losses and the Talbot effect. A pure in-phase supermode is obtained (1.1 times diffraction limited). The laser operating in this mode has a slope efficiency of 70% with up to 44 W of output power. The modal area of the in-phase supermode multicore fiber is 1150 microm2, which makes it, to our knowledge, the single-mode fiber laser with the largest mode field area. In-phase laser action is stable when the fiber is bent.
Optics Letters 08/2005; 30(13):1668-70. · 3.40 Impact Factor