-
[show abstract]
[hide abstract]
ABSTRACT: The aim of the present study was to evaluate bone remodeling and bone-to-implant contact (BIC) after immediate placement at different levels in relation to the crestal bone of Beagle dogs.
The mandibular bilateral second, third and fourth premolars of six Beagle dogs were extracted and six implants were immediately placed in the hemi-arches of each dog. Randomly, three cylindrical and three tapered implants were inserted crestally (control group) and 2 mm subcrestally (experimental group). Both groups were treated with a minimal mucoperiosteal flap elevation approach. A gap from the buccal cortical wall to the implant was always left. Three dogs were allowed a 4-week submerged healing period and the other three an 8-week submerged healing period. The animals were sacrificed and biopsies were obtained. Biopsies were processed for ground sectioning. Histomorphometric analysis was carried out in order to compare buccal and lingual bone height loss, and BIC between the two groups.
All implants osseointegrated clinically and histologically. Healing patterns examined microscopically at 4 and 8 weeks for both groups (crestal and subcrestal) yielded similar qualitative bone findings. The distance from the top of the implant collar to the first BIC in the lingual crest (A-Lc) showed a significant difference (P=0.0313): 1.91 ± 0.2 mm in the control group and 1.08 ± 0.2 mm in the experimental group. There was less bone resorption in subcrestal implants than crestal implants. The mean percentage of newly formed BIC was greater with the cylindrical implant design (46.06 ± 4.09%) than with the tapered design (32.64 ± 3.72%).
These findings suggest that apical positioning of the top of the implant does not jeopardize bone crest and peri-implant tissue remodeling. However, less resorption of the Lc may be expected when implants are placed 2 mm subcrestally.
Clinical Oral Implants Research 03/2011; 23(2):228-35. · 2.51 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: This article describes how the concept of platform switching has been incorporated into a new implant design as a method of reducing crestal bone loss and maintaining the gingival papillae. A 6-month study of the effects of this implant on bone loss is described.
Ten new platform switched implants were placed into fresh anterior maxillary extraction sites in 3 men and 7 women, ranging in age between 29 and 45 years old, and immediately provisionalized. The adjoining bone height was evaluated with digital radiography on the day after implant placement, and at 15 days, 1, 2, 3, and 6 months later.
After 6 months, the mean bone loss on the mesial of the central-incisor implants was 0.05 mm. The mean bone loss was 0.07 mm on the distal of the central incisor implants, 0.07 mm on the mesial of the lateral-incisor implants, and 0.06 mm on the distal of the lateral-incisor implants.
An implant design that incorporates the concept of platform switching is a simple and effective way to control circumferential bone loss around dental implants, helping to ensure a predictable esthetic result.
Implant Dentistry 07/2007; 16(2):155-64. · 1.05 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: Narrow alveolar ridges remain a serious challenge for the successful placement of endosseous implants. This article reports a technique for widening the atrophic ridge by splitting the alveolar bone longitudinally and filling the bone gap with collagenised pig bone, treatment of ridges as thin as 2.5mm at the alveolar crest and simultaneous placement of dental implants. Treatment of a 22-year-old female patient with a severely resorbed anterior maxilla is described. 4mm wide by 13mm long threaded Osseotite implants were immediately placed within the split ridge and surrounded with a mixture of autogenous tuberosity and collagenised pig bone. The advantages of this technique for patients include less surgical trauma and reduced treatment time.
Journal of the Irish Dental Association 02/2007; 53(4):187-90.
-
[show abstract]
[hide abstract]
ABSTRACT: The aim of this article is to assess the efficiency of the technique for the posterior alveolar expansion and elevation of the upper maxillary alveolar ridge through the use of compressive osteotomes (Quirurgical Bontempi, España) which have been specifically designed for Osseotite NT and Osseotite NT Certain of 3i implants (Implants Innovations, USA).
24 adult patients (16 female and 12 male), who were selected according to Albrektsson's inclusion and exclusion criteria, took part in the study. All the patients presented bone deficiency in the width and height of the upper maxilla. 48 Osseotite implants were performed (four Osseotite Standard; six Osseotite NT; 38 NT Certain (3i, Implants Innovations, CA, USA)). Implant diameters were 4 mm in 44 cases and 5 mm in 4 cases with lengths varying between 11.5 (n = 4) and 13 mm (n = 44). The alveolar ridges of the 24 patients had initial widths from 1.5 mm to 5 mm and heights between 5 and 13 mm. Results: The data obtained were analysed using the SPSS 11.0 program. In the 48 areas treated with immediate implants, an increase in bone height of 6.75 mm -/+ 1.25 mm was achieved. In the case of the alveolar expansion for the 48 implants, the average was 3.2 mm -/+ 0.15 mm.
The technique for alveolar expansion and elevation of the upper maxilla with compressive osseotomes can lead to a 100% success rate after a 9-month follow-up of the implants and insertion of prostheses. It is a highly predictable surgical procedure which allows implants to be performed at the same time as surgery, thus reducing the number of such interventions while recovering aesthetic and functional losses in the patient.
Medicina oral, patologia oral y cirugia bucal 02/2006; 11(1):E52-5.
-
[show abstract]
[hide abstract]
ABSTRACT: Maxillary alveolar atrophy often limits the placement of dental implants. This article reports on a refinement of a technique for widening the atrophic ridge by splitting the alveolar bone longitudinally. Treatment of a patient with a severely resorbed edentulous maxilla is described. Six 4-mm wide by 13-mm long threaded Osseotite implants were placed immediately within the split ridge and surrounded with a mixture of autogenous tuberosity and bovine bone. The advantages of this technique for patients include less surgical trauma and condensed treatment time.
Implant Dentistry 04/2005; 14(1):14-20. · 1.05 Impact Factor
-
[show abstract]
[hide abstract]
ABSTRACT: This article describes the immediate replacement of two maxillary lateral incisors teeth after extraction of the left lateral deciduous incisor at the same time with immediate Osseotite implants and immediate restoration. A traumatic dental extraction of a deciduos (b) lateral incisor was performed and a 4mm diameter x 15 mm 3i tapered Osseotite (Implants Innovations, Palm Beach, CA, USA) implant was immediately placed. The other lateral incisor place was treated at the same time and provisional temporary crowns were placed at the same surgery. The provisional crowns did not have any occlusal contact to reduce negative lateral forces. Final impression for definitive restoration was made five months after implant placement veneer ceramic crowns were bonded to the Gingihue abutment (3i, Implants Innovations, Palm Beach, CA) one month later. This article describes the use of immediate implants with immediate loading of Osseotite combined with provisional crowns resulted in an excellent outcome after a two-year follow up period.
Journal of the Irish Dental Association 02/2005; 51(4):173-6.
-
[show abstract]
[hide abstract]
ABSTRACT: El objetivo de este estudio fue evaluar el efecto de la aplicación tópica de melatonina mezclada con hueso porcino colagenizado para acelerar la osteointegración en implantes con superficie (DCD) y reabsorción de la cresta ósea alveolar en perros beagle después de 3 meses de evaluación. Se colocaron 72 implantes dentales en premolares (P3 y P4) y molares inferiores (M1) de 12 perros beagle. Cada hemi-mandíbula recibió tres implantes de paredes paralelas con superficie (DCD) de 4 mm de diámetro y 10 mm de longitud. Los implantes fueron asignados mediante la técnica de �Split Mouth� en alveolos distales a cada lado de la mandíbula en tres grupos: el grupo I con implantes solo DCD, el grupo II con implantes de melatonina y el grupo III con implantes de melatonina y el hueso porcino MP3 (Osteobiol, Osteogenos, Madrid). Antes de la implantación, se aplicaron 5 mg de melatonina en polvo liofilizado en cada alveolo de los premolares (P4) a cada lado de la mandíbula y en el alveolo del primer molar inferior, mezclado con hueso porcino colagenizado MP3. No se aplicó melatonina en los sitios de control. Se obtuvieron diez cortes histológicos por implante para el estudio histomorfométrico. Después de un periodo de tratamiento de 4 semanas, la melatonina aumentó significativamente el perímetro del hueso que estaba en contacto directo con los implantes tratados (P <0,0001), la densidad ósea (p <0,0001), la formación de hueso nuevo (P <0,0001) en comparación con el control implantes. La aplicación tópica de melatonina en la superficie de DCD puede actuar como un agente biomimético en la colocación de los implantes dentales y aumentar la osteointegración. La melatonina combinada con el hueso porcino colagenizado revela mayor aposición ósea en contacto con los implantes a las 12 semanas (86,4 ± 0,9%) en comparación con los implantes tratados con melatonina tratados (76,4 ± 1,6%) y los implantes sin tratar (67,8 ± 0,7 %).
Gaceta dental: Industria y profesiones, ISSN 1135-2949, Nº. 216, 2010 (Ejemplar dedicado a: Especial Implantes), pags. 110-121.
-
[show abstract]
[hide abstract]
ABSTRACT: Aim: The aim of this article is to assess the efficiency of the technique for the posterior alveolar expansion and elevation of the upper maxillary alveolar ridge through the use of compressive osteotomes (Quirurgical Bontempi, España) which have been specifically designed for Osseotite NT and Osseotite NT Certain of 3i implants (Implants Innovations, USA). Materials and Methods: 24 adult patients (16 female and 12 male), who were selected according to Albrektsson�s inclusion and exclusion criteria, took part in the study. All the patients presented bone deficiency in the width and height of the upper maxilla. 48 Osseotite implants were performed (four Osseotite Standard; six Osseotite NT; 38 NT Certain (3i, Implants Innovations, CA, USA)). Implant diameters were 4 mm in 44 cases and 5 mm in 4 cases with lengths varying between 11.5 (n = 4) and 13 mm. (n = 44). The alveolar ridges of the 24 patients had initial widths from 1.5 mm to 5 mm and heights between 5 and 13mm. Results: The data obtained were analysed using the SPSS 11.0 program. In the 48 areas treated with immediate implants, an increase in bone height of 6.75 mm ± 1.25 mm. was achieved. In the case of the alveolar expansion for the 48 implants, the average was 3.2 mm. ± 0.15 mm. Conclusions: The technique for alveolar expansion and elevation of the upper maxilla with compressive osseotomes can lead to a 100% success rate after a 9-month follow-up of the implants and insertion of prostheses. It is a highly predictable surgical procedure which allows implants to be performed at the same time as surgery, thus reducing the number of such interventions while recovering aesthetic and functional losses in the patient. Objetivo: El objetivo de este artículo es evaluar la eficacia de la técnica del ensanchamiento alveolar posterior y elevación del reborde alveolar del maxilar superior mediante el uso de los osteótomos compresivos ( Quirurgical Bontempi, España) especialmente diseñados para los implantes Osseotite NT y Osseotite NT Certain de 3i ( Implants Innovations, USA). Material y métodos: En el estudio se incluyeron 24 pacientes (16 mujeres y 8 hombres) siguiendo los criterios de inclusión y exclusión de Albrektsson, que presentaban un déficit óseo en anchura y altura del maxilar superior. Se colocaron 48 implantes Osseotite ( cuatro Osseotite Standard, seis Ossoetite NT y treinta y ocho NT Certain (3i, Implantes Innovations, CA, USA). El diámetro de los implantes fueron 44 de 4 mm y 4 de 5 mm con longitudes que variaban entre 11.5 (n=4) y 13 mm (n= 44). La cresta alveolar inicial tenía una anchura que variaba de 1.5mm a 5 mm y una altura que oscilaba entre 5 mm y 13 mm en los 24 pacientes. Resultados: Los datos obtenidos fueron analizados con el programa SPSS 11.0. En los 48 sitios tratados donde se colocaron los implantes inmediatos se obtuvo un aumento de altura ósea de 6.75 mm ± 1.25 mm. En el ensanchamiento alveolar de los 48 sitios implantados la media fue de 3.2 mm ± 0.15 mm. Conclusiones: La técnica de ensanchamiento y elevación alveolar del maxilar superior con osteótomos compresivos permite obtener un porcentaje de éxito de un 100 % a los 9 meses de seguimiento en los implantes y prótesis colocadas. Es un procedimiento quirúrgico con alta predictibilidad y además permite la colocación los implantes en el mismo acto quirúrgico reduciendo el número de cirugías, devolviendo la estética y función del paciente perdidas.
Medicina oral, patología oral y cirugía bucal, ISSN 1698-4447, Vol. 11, Nº. 1, 2006, pags. 37-40.
