Introducing Amine Functionalities on a Poly(3-hydroxybutyrate- co -3-hydroxyvalerate) Surface: Comparing the Use of Ammonia Plasma Treatment and Ethylenediamine Aminolysis
Nanotechnology and Biomaterials Centre and School of Molecular and Microbial Sciences, The University of Queensland, Brisbane, Queensland, Australia. Biomacromolecules
(Impact Factor: 5.75).
03/2006; 7(2):427-34. DOI: 10.1021/bm050497a
Amine functionalities were introduced onto the surface of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) films by applying radio frequency ammonia plasma treatment and wet ethylenediamine treatment. The modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS) for chemical composition and Raman microspectroscopy for the spatial distribution of the chemical moieties. The relative amount of amine functionalities introduced onto the PHBV surface was determined by exposing the treated films to the vapor of trifluoromethylbenzaldehyde (TFBA) prior to XPS analysis. The highest amount of amino groups on the PHBV surface could be introduced by use of ammonia plasma at short treatment times of 5 and 10 s, but no effect of plasma power within the range of 2.5-20 W was observed. Ethylenediamine treatment yielded fewer surface amino groups, and in addition an increase in crystallinity as well as degradation of PHBV was evident from Fourier transform infrared spectroscopy. Raman maps showed that the coverage of amino groups on the PHBV surfaces was patchy with large areas having no amine functionalities.
Available from: Victoria Flexer
- "Graphite felt electrodes were positioned in such a way that would allow exposure to the plasma of both sides of the sample. A previously described  , purpose-built plasma reactor was used. Briefly, it consisted of a tubular glass chamber with an external copper electrode wrapped around the central part. "
[Show abstract] [Hide abstract]
ABSTRACT: Surface modifications of electrode materials are important for improved performance of microbial bio-electrochemical systems. Here, we studied the effect of pre-treating both glassy carbon and graphite felt electrodes with either an oxygen or a nitrogen plasma before reactor inoculation with a mixed microbial consortia. The plasma produces chemical modifications at the electrode surface level. X-ray photoelectron spectroscopy and water contact angle analysis showed that the plasma removes surface contamination, produces ion implantation and renders the hydrophobic surfaces highly hydrophilic. Plasma pre-treatment considerably accelerated the generation of a bio-electrochemical anodic current after inoculation. Nitrogen plasma pre-treatment yielded the best performance, followed closely by oxygen plasma. Plasma pre-treated electrodes reached a plateau of maximum current density twice as fast as untreated electrodes. Analysis of the current development profiles suggests that the plasma pretreatment is neither producing a preferential attachment of certain types of bacteria over others nor accelerating the extracellular electron transfer rate. The results indicate that the plasma treatment considerably enhances the initial cell adhesion, which results in subsequently faster biofilm development. Plasma pre-treatment of electrodes is an inexpensive, fast, safe and straightforward technique to achieve more rapid start-up of bio-electrochemical processes.
Electrochimica Acta 10/2013; 108:566-574. DOI:10.1016/j.electacta.2013.06.145 · 4.50 Impact Factor
Available from: Young Choi
- "Polyhydroxyalkanoates with functional groups (functionalized PHAs) have attracted increasing attention in the last ten years or so [1-9]. It has been generally recognized that important needs and markets exist for various types of functionalized PHAs as advanced materials in areas, such as tissue engineering [2,10,11], biocomposites , various medical applications [5,13], and polymers with tunable properties , only to name a few. "
[Show abstract] [Hide abstract]
ABSTRACT: Methylotrophic (methanol-utilizing) bacteria offer great potential as cell factories in the production of numerous products from biomass-derived methanol. Bio-methanol is essentially a non-food substrate, an advantage over sugar-utilizing cell factories. Low-value products as well as fine chemicals and advanced materials are envisageable from methanol. For example, several methylotrophic bacteria, including Methylobacterium extorquens, can produce large quantities of the biodegradable polyester polyhydroxybutyric acid (PHB), the best known polyhydroxyalkanoate (PHA). With the purpose of producing second-generation PHAs with increased value, we have explored the feasibility of using M. extorquens for producing functionalized PHAs containing C-C double bonds, thus, making them amenable to future chemical/biochemical modifications for high value applications.
Our proprietary M. extorquens ATCC 55366 was found unable to yield functionalized PHAs when fed methanol and selected unsaturated carboxylic acids as secondary substrates. However, cloning of either the phaC1 or the phaC2 gene from P. fluorescens GK13, using an inducible and regulated expression system based on cumate as inducer (the cumate switch), yielded recombinant M. extorquens strains capable of incorporating modest quantities of C-C double bonds into PHA, starting from either C6= and/or C8=. The two recombinant strains gave poor results with C11=. The strain containing the phaC2 gene was better at using C8= and at incorporating C-C double bonds into PHA. Solvent fractioning indicated that the produced polymers were PHA blends that consequently originated from independent actions of the native and the recombinant PHA synthases.
This work constitutes an example of metabolic engineering applied to the construction of a methanol-utilizing bacterium capable of producing functionalized PHAs containing C-C double bonds. In this regard, the PhaC2 synthase appeared superior to the PhaC1 synthase at utilizing C8= as source of C-C double bonds and at incorporating C-C double bonds into PHA from either C6= or C8=. The M. ex-phaC2 strain is, therefore, a promising biocatalyst for generating advanced (functionalized) PHAs for future high value applications in various fields.
Microbial Cell Factories 09/2010; 9(1):70. DOI:10.1186/1475-2859-9-70 · 4.22 Impact Factor
Available from: Arnaldo Rodrigues Santos, Jr
- "The surface properties of biomaterials can be altered in such a way as to make them more adequate for biomedical applications. The most commonly used techniques are chemical etching, gas plasma treatment and electron beam radiation . Among these techniques, plasma treatment is particularly versatile because the modification is restricted to the surface without compromising the material properties as a whole. "
Tissue Engineering, 03/2010; , ISBN: 978-953-307-079-7
Data provided are for informational purposes only. Although carefully collected, accuracy cannot be guaranteed. The impact factor represents a rough estimation of the journal's impact factor and does not reflect the actual current impact factor. Publisher conditions are provided by RoMEO. Differing provisions from the publisher's actual policy or licence agreement may be applicable.